- Foundation
- About 15 min
- 5 practice questions
Sections of a cone: circle, ellipse, parabola and hyperbola
Describe a double-napped cone, explain how the angle of a cutting plane decides whether the section is a circle, ellipse, parabola or hyperbola, and recognise the degenerate conics.
If something looks wrong, please tell us.
Circles, ellipses, parabolas and hyperbolas look like four unrelated curves, yet the Greek geometer Apollonius showed that all of them appear when a flat plane slices through a cone. That is why they are called conic sections, or simply conics. They matter far beyond geometry: planets move in ellipses, a car headlight reflector is shaped like a parabola, and satellite dishes and telescope mirrors use the same reflecting property.
The double-napped cone
Take a fixed vertical line l and a second line m that crosses it at a fixed point V, making a constant angle α with l. Now rotate m all the way round l, keeping the angle α fixed. The surface traced out is a double-napped right circular cone, extending without end in both directions.
- Vertex: the fixed point V.
- Axis: the fixed line l.
- Generator: the rotating line m; every position of m lies on the cone.
- Nappes: the two parts of the cone on either side of the vertex.
- α: the angle between the axis and a generator (the semi-vertical angle).
How the cutting plane decides the curve
Let a plane cut the cone, and let β be the angle between the plane and the vertical axis. When the plane does not pass through the vertex, comparing β with α tells us the curve:
| Angle of the plane | What the plane does | Section |
|---|---|---|
| β = 90° | Cuts one nappe, perpendicular to the axis | Circle |
| α < β < 90° | Cuts right across one nappe at a slant | Ellipse |
| β = α | Parallel to a generator; cuts one nappe but never closes | Parabola |
| 0 ≤ β < α | Steep enough to cut both nappes | Hyperbola (two branches) |
Conic sections of a double-napped cone
-
Plane misses the vertex
- β = 90°: circle
- α < β < 90°: ellipse
- β = α: parabola
- 0 ≤ β < α: hyperbola
-
Plane passes through the vertex (degenerate)
- α < β ≤ 90°: a single point
- β = α: a straight line (degenerate parabola)
- 0 ≤ β < α: a pair of intersecting lines (degenerate hyperbola)
Degenerate conics
If the plane passes through the vertex, the section collapses. When the plane is less steep than the cone's surface (α < β ≤ 90°), it touches the cone only at V, giving a point. When β = α, the plane contains a generator and the section is a straight line, a degenerate parabola. When the plane is steeper than the cone (0 ≤ β < α), it cuts along two generators, giving a pair of intersecting straight lines, a degenerate hyperbola.
Worked examples
Worked example 1: naming the section
A double-napped cone has α = 30°. Name the section made by a plane that does not pass through the vertex if β is (i) 90°, (ii) 50°, (iii) 30°, (iv) 10°. Compare each β with α = 30°: (i) β = 90° gives a circle. (ii) 30° < 50° < 90° gives an ellipse. (iii) β = α gives a parabola. (iv) 0 ≤ 10° < 30° gives a hyperbola, which has two branches because the plane cuts both nappes.
Worked example 2: planes through the vertex
For the same cone (α = 30°), what does a plane through the vertex give if β = 60°, 30° or 20°? β = 60° lies between 30° and 90°, so the section is a single point. β = 30° = α, so the plane contains a generator: a straight line. β = 20° < 30°, so the plane cuts along two generators: two intersecting lines.
Worked example 3: reasoning about shapes
Why is a parabola open while an ellipse is closed? For an ellipse the plane is tilted less steeply than the generators, so it meets every generator of one nappe and the curve closes up. For a parabola the plane is parallel to one generator, so it never meets that generator, and the curve runs off to infinity on that side. A hyperbola goes further: it misses a whole band of generators of each nappe, so it is open and comes in two pieces.
From cones to equations
In the rest of the chapter each conic is defined directly in the plane by a distance property, and that definition gives its standard equation:
| Conic | Defining property | Standard equation |
|---|---|---|
| Circle | Points at a fixed distance r from a fixed centre | x² + y² = r² |
| Parabola | Points equidistant from a fixed point (focus) and a fixed line (directrix) | y² = 4ax |
| Ellipse | Sum of distances from two foci is constant (2a) | x²/a² + y²/b² = 1 |
| Hyperbola | Difference of distances from two foci is constant (2a) | x²/a² − y²/b² = 1 |
Compare the plane's angle β with the cone's angle α: β = 90° circle; α < β < 90° ellipse; β = α parabola; β < α hyperbola.
Key takeaways
- Conics are curves cut from a double-napped cone by a plane.
- The angle β of the plane with the axis, compared with the cone angle α, decides the type.
- A plane through the vertex gives degenerate conics: a point, a line, or a pair of lines.
- Each conic also has a distance definition in the plane, which gives its equation.
Check your understanding
-
1. A plane cuts one nappe of a double-napped cone (not at the vertex) at right angles to the axis. The section is:
- an ellipse
- a circle
- a parabola
- a hyperbola
Show answer
Answer: B. When β = 90° the plane is perpendicular to the axis, so every point of the section is the same distance from the axis: a circle.
-
2. For a cone with α = 40°, a plane not through the vertex makes β = 25° with the axis. The section is:
- a hyperbola
- an ellipse
- a parabola
- a circle
Show answer
Answer: A. Since 0 ≤ 25° < 40°, that is β < α, the plane cuts both nappes and the section is a hyperbola.
-
3. Which section is obtained when the cutting plane is parallel to a generator and does not pass through the vertex?
- Circle
- Ellipse
- Hyperbola
- Parabola
Show answer
Answer: D. A plane parallel to a generator has β = α. Away from the vertex this gives a parabola.
-
4. A plane passes through the vertex of the cone and β < α. The section is:
- a single point
- a single straight line
- a pair of intersecting straight lines
- a circle
Show answer
Answer: C. Through the vertex, a plane steeper than the cone (β < α) cuts along two generators, giving two straight lines that intersect at the vertex: the degenerate hyperbola.
-
5. Assertion (A): A hyperbola has two separate branches. Reason (R): The plane that produces a hyperbola cuts both nappes of the cone.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. For 0 ≤ β < α the plane meets both nappes, and each nappe gives one branch. R explains A.
Sign in to keep track of the lessons you finish.