• Foundation
  • About 17 min
  • 5 practice questions

Angles in degrees and radians, and the arc formula l = rθ

Measure angles as rotations, convert between degrees and radians, and use l = rθ to find arc lengths, radii and angles in circles.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe an angle as a rotation, with positive (anticlockwise) and negative (clockwise) angles.
  • Use degrees, minutes and seconds: 1° = 60′ and 1′ = 60″.
  • Define one radian and convert between radian and degree measure.
  • Use l = rθ (θ in radians) to find arc lengths, radii and angles.

In Class 10 you met trigonometric ratios of acute angles in a right triangle. To describe things that rotate or repeat, such as a wheel, a pendulum or a sound wave, we need angles of any size, positive or negative. This lesson sets up the two units used for such angles and the link between angle and arc length that makes radians so natural.

An angle as a rotation

An angle is the amount of rotation of a ray about its starting point. The starting position of the ray is the initial side, the final position is the terminal side, and the point of rotation is the vertex. An anticlockwise rotation gives a positive angle and a clockwise rotation gives a negative angle. One complete turn brings the ray back to the initial side; rotating further gives angles larger than one turn, such as 420°.

Degree measure

If the rotation is 1/360 of a full revolution, the angle is one degree, written 1°. Smaller units are the minute and the second: 1° = 60′ and 1′ = 60″. So 30′ is half a degree, and 15° 45′ = 15.75°.

Radian measure

Take a circle of radius 1 unit. The angle at the centre subtended by an arc of length 1 unit is one radian. In a circle of radius r, an arc of length r subtends 1 radian, so an arc of length l subtends l/r radians. This gives the central result of the lesson.

If an arc of length l subtends an angle of θ radians at the centre of a circle of radius r, then l = rθ, that is θ = l/r. θ must be in radians.

— Arc length

A full circle has circumference 2πr, so a full revolution is 2πr/r = 2π radians. Since a full revolution is also 360°, we get π radians = 180°. With π ≈ 22/7, 1 radian = 180°/π ≈ 57° 16′, and 1° = π/180 radian ≈ 0.01746 radian. Radians are pure numbers (a length divided by a length), which is why each real number can be thought of as a radian measure. When no unit is written, an angle is in radians: sin 2 means the sine of 2 radians.

Common angles in both units
Degrees30°45°60°90°180°270°360°
Radiansπ/6π/4π/3π/2π3π/22π

Radian measure = (π/180) × degree measure. Degree measure = (180/π) × radian measure.

— Conversion

Converting degrees, minutes and seconds to radians

  1. Write minutes as a fraction of a degree Divide minutes by 60 (and seconds by 3600).
  2. Get a single degree value For example 25° 30′ = 25.5°.
  3. Multiply by π/180 Keep π as a symbol unless told to use a value.
  4. Simplify the fraction Give the answer as a multiple of π.

Worked example 1: degrees to radians

Convert 25° 30′ to radians. Working: 30′ = 30/60 degree = 0.5°, so the angle is 25.5° = 51/2 degree. Radian measure = (π/180) × 51/2 = 51π/360 = 17π/120 radian. Also, 300° = (π/180) × 300 = 5π/3 and −135° = −3π/4.

Worked example 2: radians to degrees

Convert 3 radians to degrees, using π = 22/7. Working: degree measure = (180/π) × 3 = 540 × 7/22 = 3780/22 = 171 9/11 degrees. Now 9/11 degree = (9/11) × 60′ = 540/11′ = 49 1/11′, and 1/11′ = 60/11″ ≈ 5″. So 3 radians ≈ 171° 49′ 5″. Also 5π/6 = (180/π) × 5π/6 = 150°.

Worked example 3: arc length

Find the length of the arc of a circle of radius 14 cm that subtends 45° at the centre (π = 22/7). Working: first convert to radians, θ = 45° = π/4. Then l = rθ = 14 × π/4 = 3.5π = 3.5 × 22/7 = 11 cm. Using 45 directly in l = rθ would give a nonsense answer of 630 cm; the formula needs radians.

Worked example 4: the minute hand of a clock

The minute hand of a wall clock is 7 cm long. How far does its tip move in 20 minutes (π = 22/7)? Working: in 60 minutes the hand makes one revolution, so in 20 minutes it turns 1/3 of a revolution, that is θ = 2π/3 radian. Then l = rθ = 7 × 2π/3 = 14π/3 = 14 × 22/21 = 44/3 cm ≈ 14.67 cm.

Worked example 5: comparing two circles

Arcs of the same length in two circles subtend 45° and 60° at their centres. Find the ratio of the radii. Working: θ₁ = π/4 and θ₂ = π/3. Since l = r₁θ₁ = r₂θ₂, we get r₁/r₂ = θ₂/θ₁ = (π/3)/(π/4) = 4/3. So r₁ : r₂ = 4 : 3. The smaller angle belongs to the larger circle, as you would expect.

Worked example 6: a rotating wheel

A wheel makes 180 revolutions per minute. Through how many radians does it turn in one second? Working: 180 revolutions per minute is 3 revolutions per second, and each revolution is 2π radians, so the wheel turns 6π radians per second.

Key takeaways: an angle is a rotation, positive when anticlockwise. π radians = 180°; multiply by π/180 to go from degrees to radians and by 180/π to go back. l = rθ only works with θ in radians, so convert first.

Check your understanding

  1. 1. What is 210° in radian measure?

    1. 5π/6
    2. 7π/6
    3. 7π/4
    4. 4π/3
    Show answer

    Answer: B. Radian measure = (π/180) × 210 = 210π/180 = 7π/6. Check: 7π/6 = 7 × 30° = 210°.

  2. 2. What is 7π/12 radian in degrees?

    1. 105°
    2. 75°
    3. 120°
    4. 210°
    Show answer

    Answer: A. Degree measure = (180/π) × 7π/12 = 7 × 15 = 105°.

  3. 3. In a circle of radius 100 cm, an arc of length 22 cm subtends an angle θ at the centre. What is θ in degrees? (Use π = 22/7.)

    1. 22°
    2. 6.3°
    3. 12.6°
    4. 0.22°
    Show answer

    Answer: C. θ = l/r = 22/100 = 0.22 radian. In degrees, 0.22 × 180/π = 0.22 × 180 × 7/22 = 12.6°. The value 0.22 is the angle in radians, not degrees.

  4. 4. A pendulum 60 cm long swings so that its tip describes an arc of 12 cm. Through what angle does it swing?

    1. 1/5 radian
    2. 5 radians
    3. 1/12 radian
    4. 12/π radian
    Show answer

    Answer: A. θ = l/r = 12/60 = 1/5 radian. Both lengths are in centimetres, so the units cancel and the answer is in radians.

  5. 5. Assertion (A): In a circle of radius 10 cm, a central angle of 30° cuts off an arc of length 300 cm. Reason (R): The arc length is l = rθ, where θ is measured in radians.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: D. R is true. A is false because 30° must first be converted: θ = π/6, so l = 10 × π/6 = 5π/3 ≈ 5.24 cm. The 300 cm comes from wrongly putting 30 into l = rθ.

Privacy · Terms · Refunds · Delivery