Revision notes

Chapter 3 Trigonometric Functions: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Angles in degrees and radians, and the arc formula l = rθ

If an arc of length l subtends an angle of θ radians at the centre of a circle of radius r, then l = rθ, that is θ = l/r. θ must be in radians.

— Arc length
Common angles in both units
Degrees30°45°60°90°180°270°360°
Radiansπ/6π/4π/3π/2π3π/22π

Radian measure = (π/180) × degree measure. Degree measure = (180/π) × radian measure.

— Conversion

Converting degrees, minutes and seconds to radians

  1. Write minutes as a fraction of a degree Divide minutes by 60 (and seconds by 3600).
  2. Get a single degree value For example 25° 30′ = 25.5°.
  3. Multiply by π/180 Keep π as a symbol unless told to use a value.
  4. Simplify the fraction Give the answer as a multiple of π.

Key takeaways: an angle is a rotation, positive when anticlockwise. π radians = 180°; multiply by π/180 to go from degrees to radians and by 180/π to go back. l = rθ only works with θ in radians, so convert first.

Read the full lesson

Lesson 2

Trigonometric functions on the unit circle

Sine and cosine at quadrantal angles
x0π/2π3π/22π
Point reached(1, 0)(0, 1)(−1, 0)(0, −1)(1, 0)
cos x10−101
sin x010−10

The six trigonometric functions

  • Defined from the unit circle
    • cos x = x-coordinate of P
    • sin x = y-coordinate of P
  • Need cos x ≠ 0 Undefined at odd multiples of π/2.
    • tan x = sin x/cos x
    • sec x = 1/cos x
  • Need sin x ≠ 0 Undefined at multiples of π.
    • cot x = cos x/sin x
    • cosec x = 1/sin x

sin²x + cos²x = 1; 1 + tan²x = sec²x; 1 + cot²x = cosec²x.

— Pythagorean identities
The same values you learnt for acute angles in Class 10
x0π/6π/4π/3π/2
sin x01/21/√2√3/21
cos x1√3/21/√21/20
tan x01/√31√3not defined

Key takeaways: on the unit circle cos x and sin x are the coordinates of the point reached after an arc of length x. sin x = 0 at x = nπ, cos x = 0 at x = (2n + 1)π/2, and these are exactly the points to exclude from cot, cosec and from tan, sec. All three Pythagorean identities come from sin²x + cos²x = 1.

Read the full lesson

Lesson 3

Signs, domain, range and periodicity of trigonometric functions

Signs of the trigonometric functions
FunctionI (0 to π/2)II (π/2 to π)III (π to 3π/2)IV (3π/2 to 2π)
sin x, cosec x++−−
cos x, sec x+−−+
tan x, cot x+−+−

Which functions are positive in each quadrant

  • Quadrant I
    • All six positive
  • Quadrant II
    • sin and cosec positive
    • the rest negative
  • Quadrant III
    • tan and cot positive
    • the rest negative
  • Quadrant IV
    • cos and sec positive
    • the rest negative
Domain and range of the six functions
FunctionDomainRange
sin xR[−1, 1]
cos xR[−1, 1]
tan xR − {(2n + 1)π/2 : n ∈ Z}R
cot xR − {nπ : n ∈ Z}R
sec xR − {(2n + 1)π/2 : n ∈ Z}y ≤ −1 or y ≥ 1
cosec xR − {nπ : n ∈ Z}y ≤ −1 or y ≥ 1

sin(2nπ + x) = sin x, cos(2nπ + x) = cos x, tan(nπ + x) = tan x for every integer n. Also sin(−x) = −sin x and cos(−x) = cos x.

— Periodicity and negative angles

Finding all six values from one value

  1. Use an identity sin²x + cos²x = 1, 1 + tan²x = sec²x or 1 + cot²x = cosec²x.
  2. Get the value up to ± Take the square root.
  3. Choose the sign Use the quadrant and the sign table.
  4. Fill in the rest Use quotients and reciprocals.

Key takeaways: sin is odd and cos is even. The sign table depends only on the signs of the coordinates in each quadrant. sin and cos have range [−1, 1]; sec and cosec never lie strictly between −1 and 1; tan and cot take every real value. sin, cos, sec, cosec repeat every 2π and tan, cot every π. To find all six values, use an identity, then fix the sign from the quadrant.

Read the full lesson

Lesson 4

Sum and difference formulas and allied angles

sin(x ± y) = sin x cos y ± cos x sin y; cos(x ± y) = cos x cos y ∓ sin x sin y; tan(x ± y) = (tan x ± tan y)/(1 ∓ tan x tan y).

— Sum and difference formulas
Allied-angle results (tan follows by division; for example tan(π + x) = tan x)
Anglesincos
π/2 − xcos xsin x
π/2 + xcos x−sin x
π − xsin x−cos x
π + x−sin x−cos x
2π − x−sin xcos x

Evaluating sin, cos or tan of any angle

  1. Remove whole periods Subtract multiples of 2π (or π for tan).
  2. Write it as an allied angle π − x, π + x or 2π − x with x acute.
  3. Fix the sign Use the quadrant of the original angle.
  4. Use the standard value From the table for π/6, π/4, π/3.

Key takeaways: prove cos(x + y) once from the unit circle, and every other sum and difference formula follows by replacing y with −y or using π/2 − x. Allied angles are special cases. To find exact values, split the angle into standard angles; to find sin(x + y) from given values, first find the missing sines and cosines with the correct signs.

Read the full lesson

Lesson 5

Multiple angles, sum-to-product and product-to-sum formulas

cos 2x = cos²x − sin²x = 2cos²x − 1 = 1 − 2sin²x = (1 − tan²x)/(1 + tan²x); sin 2x = 2 sin x cos x = 2 tan x/(1 + tan²x); tan 2x = 2 tan x/(1 − tan²x).

— Double-angle formulas
Sum-to-product formulas
Sum or differenceProduct
cos x + cos y2 cos((x + y)/2) cos((x − y)/2)
cos x − cos y−2 sin((x + y)/2) sin((x − y)/2)
sin x + sin y2 sin((x + y)/2) cos((x − y)/2)
sin x − sin y2 cos((x + y)/2) sin((x − y)/2)
Product-to-sum formulas
ProductSum
2 cos x cos ycos(x + y) + cos(x − y)
−2 sin x sin ycos(x + y) − cos(x − y)
2 sin x cos ysin(x + y) + sin(x − y)
2 cos x sin ysin(x + y) − sin(x − y)

Choosing a formula

  • Angle is double or triple another
    • Use the 2x or 3x formulas
    • Pick the cos 2x form that matches the rest
  • A sum or difference of two sines or cosines
    • Use sum-to-product
    • Look for a common factor afterwards
  • A product of two sines or cosines
    • Use product-to-sum
    • Then simplify term by term

Key takeaways: set y = x in the sum formulas for the double angles, and choose the form of cos 2x that suits the problem. sin 3x = 3 sin x − 4 sin³x and cos 3x = 4 cos³x − 3 cos x. Sums of sines or cosines become products, and products become sums; this is often the key step in a proof.

Read the full lesson

Privacy · Terms · Refunds · Delivery