• Foundation
  • About 16 min
  • 5 practice questions

Mean free path and molecular collisions

Explain why gas molecules move in zigzag paths, derive the mean free path l = 1/(√2 n π d²), and estimate collision times and frequencies.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why a gas spreads slowly even though its molecules move fast.
  • Derive the mean free path l = 1/(nπd²) and state the corrected form with √2.
  • Calculate the mean free path, the time between collisions and the collision frequency.
  • Explain how the mean free path depends on pressure, temperature and molecular size.

Gas molecules move at hundreds of metres per second, yet gas leaking from a cylinder takes a noticeable time to reach the far corners of a kitchen, and the top of a smoke cloud holds together for a long time. The reason is that molecules have a small but finite size, so they keep colliding. Each collision changes the direction of motion, and a molecule follows a zigzag path, making slow progress overall.

Deriving the mean free path

The mean free path l is the average distance a molecule travels between two successive collisions. Model the molecules as spheres of diameter d.

  1. A chosen molecule collides with any other whose centre comes within a distance d of its own centre.
  2. Moving with average speed ⟨v⟩ for a time Δt, it sweeps out a cylinder of cross-section πd² and length ⟨v⟩Δt, volume πd²⟨v⟩Δt.
  3. With n molecules per unit volume, the number of collisions in Δt is nπd²⟨v⟩Δt.
  4. Average time between collisions: τ = 1/(nπd²⟨v⟩).
  5. Mean free path: l = ⟨v⟩τ = 1/(nπd²).
  6. Here the other molecules were imagined at rest. Allowing for their motion (using the average relative velocity), a more exact treatment gives l = 1/(√2 nπd²).

Mean free path l = 1/(√2 n π d²). It is shorter for a denser gas (larger n) and for bigger molecules (larger d). Time between collisions τ = l/⟨v⟩; collision frequency = ⟨v⟩/l.

Since n = P/(kBT), at a fixed temperature l ∝ 1/P: lowering the pressure lengthens the mean free path. In a highly evacuated tube n is so small that a molecule can cross the whole tube without a collision. Relations of this kind, linking measurable properties such as viscosity, thermal conductivity and diffusion to molecular size, were how the sizes of molecules were first estimated.

Why a gas spreads slowly

  1. Fast molecules Speeds of hundreds of m s⁻¹.
  2. Finite size Molecules of diameter d collide often.
  3. Short free paths About 10⁻⁷ m between collisions at ordinary pressure.
  4. Zigzag motion Direction changes billions of times a second; net spreading is slow.

Worked example 1: mean free path in a gas

A gas has n = 2.5 × 10²⁵ m⁻³ and molecular diameter d = 3.0 × 10⁻¹⁰ m. l = 1/(√2 nπd²) = 1/(1.414 × 2.5 × 10²⁵ × 3.142 × 9.0 × 10⁻²⁰) = 1/(1.0 × 10⁷) ≈ 1.0 × 10⁻⁷ m. This is about 330 molecular diameters: the molecules are tiny compared with the space between collisions.

Worked example 2: collision time and frequency

If the molecules in example 1 have an average speed of 500 m s⁻¹: τ = l/⟨v⟩ = 1.0 × 10⁻⁷/500 = 2.0 × 10⁻¹⁰ s. Collision frequency = 1/τ = 5.0 × 10⁹ collisions every second for each molecule.

Worked example 3: effect of pressure

The gas of example 1 is pumped down to a pressure 10⁹ times smaller at the same temperature. Since l ∝ 1/n ∝ 1/P, the new mean free path is 1.0 × 10⁻⁷ × 10⁹ = 100 m, far longer than any laboratory vessel. The molecules then hit the walls far more often than each other.

Key takeaways

  • Finite molecular size means frequent collisions and zigzag paths, so gases spread slowly.
  • l = 1/(√2 nπd²); τ = l/⟨v⟩.
  • At fixed temperature, l ∝ 1/P; larger molecules have shorter mean free paths (l ∝ 1/d²).
  • At ordinary pressure, l is of the order of 10⁻⁷ m, hundreds of molecular diameters.

Check your understanding

  1. 1. If the diameter of the molecules of a gas were doubled with the number density unchanged, the mean free path would become

    1. twice as long
    2. half as long
    3. one quarter as long
    4. four times as long
    Show answer

    Answer: C. l = 1/(√2 nπd²), so l ∝ 1/d². Doubling d makes d² four times larger, so l becomes one quarter.

  2. 2. At constant temperature, the pressure of a gas is halved. Its mean free path

    1. doubles
    2. halves
    3. stays the same
    4. becomes four times
    Show answer

    Answer: A. At fixed T, n = P/(kBT) is proportional to P. Halving P halves n, and since l ∝ 1/n the mean free path doubles.

  3. 3. A gas has n = 1.0 × 10²⁵ m⁻³ and d = 2.0 × 10⁻¹⁰ m. Its mean free path is about

    1. 5.6 × 10⁻⁷ m
    2. 8.0 × 10⁻⁷ m
    3. 1.8 × 10⁶ m
    4. 2.0 × 10⁻¹⁰ m
    Show answer

    Answer: A. l = 1/(√2 nπd²) = 1/(1.414 × 1.0 × 10²⁵ × 3.142 × 4.0 × 10⁻²⁰) = 1/(1.78 × 10⁶) ≈ 5.6 × 10⁻⁷ m. Without the √2 the value would be about 8.0 × 10⁻⁷ m.

  4. 4. Why does the smell of perfume take some time to spread across a still room, although its molecules move at hundreds of metres per second?

    1. The molecules slow down in air
    2. The molecules collide very frequently with air molecules and follow zigzag paths
    3. Air pushes the molecules back
    4. Perfume molecules have no kinetic energy
    Show answer

    Answer: B. Each molecule travels only about 10⁻⁷ m between collisions and changes direction each time, so its net progress across the room is slow even though its speed is high.

  5. 5. Molecules with an average speed of 400 m s⁻¹ have a mean free path of 1.0 × 10⁻⁷ m. What is the average time between collisions?

    1. 4.0 × 10⁹ s
    2. 2.5 × 10⁻¹⁰ s
    3. 4.0 × 10⁻⁵ s
    4. 2.5 × 10⁻⁵ s
    Show answer

    Answer: B. τ = l/⟨v⟩ = 1.0 × 10⁻⁷/400 = 2.5 × 10⁻¹⁰ s. Each molecule therefore makes about 4 × 10⁹ collisions per second.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Kinetic Theory

Privacy · Terms · Refunds · Delivery