Revision notes

Chapter 13 Oscillations: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Periodic and oscillatory motion: period, frequency, displacement

ν = 1/T; 1 Hz = 1 s⁻¹; angular frequency ω = 2π/T = 2πν (rad s⁻¹).

Kinds of motion

  • Non-periodic
    • Motion of a body falling freely
    • Displacement like e^(−ωt) or log(ωt)
  • Periodic, not oscillatory
    • Uniform circular motion
    • Orbital motion of a planet
  • Oscillatory
    • To and fro about an equilibrium position
    • Pendulum, spring-block, swing
  • Periodic: repeats at regular intervals. Oscillatory: to and fro about an equilibrium position.
  • ν = 1/T, measured in hertz; ω = 2πν.
  • Displacement means the change of any oscillating quantity from its equilibrium value.
  • A sin ωt + B cos ωt = D sin(ωt + φ); by Fourier, any periodic function is a sum of sines and cosines.
Read the full lesson

Lesson 2

Simple harmonic motion and the reference circle

SHM: x(t) = A cos(ωt + φ). A = amplitude, ω = angular frequency, (ωt + φ) = phase, φ = phase constant (phase at t = 0).

x(t) = A cos(ωt + φ): the projection of uniform circular motion on a diameter is SHM with amplitude equal to the radius and ω equal to the angular speed.

From the reference circle to the SHM equation

  1. Reference particle P Moves round a circle of radius A at constant angular speed ω.
  2. Angle at time t ωt + φ, where φ is the starting angle.
  3. Drop a perpendicular to the x-axis Its foot P′ is at x = A cos(ωt + φ).
  4. Result P′ performs SHM of amplitude A and period 2π/ω.
  • SHM: x = A cos(ωt + φ), a sinusoidal function of time.
  • A = amplitude, ωt + φ = phase, φ = phase constant, ω = 2π/T = 2πν.
  • The projection of uniform circular motion on any diameter is SHM.
  • x-projection A cos(ωt + φ) and y-projection A sin(ωt + φ) differ in phase by π/2.
Read the full lesson

Lesson 3

Velocity and acceleration in simple harmonic motion

v(t) = dx/dt = −ωA sin(ωt + φ). Maximum speed v_max = ωA, at the mean position.

a(t) = dv/dt = −ω²A cos(ωt + φ) = −ω²x. The acceleration is proportional to the displacement and always directed towards the mean position. Maximum magnitude ω²A, at the extremes.

Displacement, velocity and acceleration in SHM
QuantityExpressionMaximum valueWhere maximumPhase relative to x
Displacement xA cos(ωt + φ)AExtremes0
Velocity v−ωA sin(ωt + φ)ωAMean positionπ/2 ahead
Acceleration a−ω²A cos(ωt + φ)ω²AExtremesπ (opposite)

One cycle of SHM starting from x = +A

  1. x = +A v = 0; a = −ω²A (largest, pointing to the centre).
  2. x = 0, moving left Speed ωA (largest); a = 0.
  3. x = −A v = 0; a = +ω²A.
  4. x = 0, moving right Speed ωA; a = 0; then back to +A.

Then back to step 1: x = +A

  • v = −ωA sin(ωt + φ) = ±ω√(A² − x²); v_max = ωA at the mean position.
  • a = −ω²x; |a|max = ω²A at the extremes.
  • Velocity leads displacement by π/2; acceleration is opposite to displacement (phase difference π).
  • All three have the same period.
Read the full lesson

Lesson 4

Force law for SHM and the spring-block oscillator

Force law of SHM: F = −kx (restoring force ∝ displacement, directed to the mean position). ω = √(k/m), T = 2π√(m/k).

Recognising SHM from the force

  1. Displace the body by x From its equilibrium position.
  2. Find the net force Add the forces from springs, gravity or other agents.
  3. Check the form F = −k(effective)x Proportional to x and pointing back to equilibrium.
  4. Read off the period T = 2π√(m/k(effective)).
  • SHM ⇔ F = −kx with k = mω².
  • Spring-block: T = 2π√(m/k), independent of amplitude; T ∝ √m and ∝ 1/√k.
  • Hanging spring: k = mg/Δl, so T = 2π√(Δl/g).
  • Block between two identical springs: effective constant 2k.
Read the full lesson

Lesson 5

Energy in SHM and the simple pendulum

K = ½k(A² − x²), U = ½kx², E = K + U = ½kA² = ½mω²A² (constant).

Energy at key points of SHM

  • Mean position (x = 0)
    • Speed maximum, ωA
    • K = ½kA² (all of E)
    • U = 0
  • x = ±A/√2
    • K = U = ½E
  • Extremes (x = ±A)
    • Speed zero
    • K = 0
    • U = ½kA² (all of E)

Simple pendulum (small angles): T = 2π√(L/g). The period does not depend on the mass of the bob or (for small swings) on the amplitude.

  • K = ½k(A² − x²), U = ½kx², E = ½kA² constant; K and U each have period T/2.
  • All kinetic at the mean position, all potential at the extremes; K = U at x = ±A/√2.
  • Simple pendulum: restoring torque −mgL sin θ ≈ −mgLθ for small θ.
  • T = 2π√(L/g), independent of the mass and, for small swings, of the amplitude.
Read the full lesson

Privacy · Terms · Refunds · Delivery