• Foundation
  • About 18 min
  • 5 practice questions

Velocity and acceleration in simple harmonic motion

Derive the velocity and acceleration of a particle in SHM, show that a = −ω²x, use v = ω√(A² − x²), and compare the phases of displacement, velocity and acceleration.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Derive v(t) = −ωA sin(ωt + φ) and a(t) = −ω²A cos(ωt + φ).
  • Show that a = −ω²x, the defining property of SHM.
  • Find the speed at any displacement using v = ω√(A² − x²).
  • Compare displacement, velocity and acceleration graphs and their phase differences.

A swing moves fastest at the bottom and stops for an instant at each end. Its acceleration does the opposite: zero at the bottom and largest at the ends. These patterns follow directly from the SHM equation, either by differentiating it or by using the reference circle.

Velocity

The reference particle moves round the circle with speed ωA along the tangent. Projecting this velocity on the x-axis gives the velocity of P′. The same result comes from differentiating x(t) = A cos(ωt + φ) with respect to time:

v(t) = dx/dt = −ωA sin(ωt + φ). Maximum speed v_max = ωA, at the mean position.

Speed at a given displacement. Since sin² + cos² = 1, sin(ωt + φ) = ±√(1 − x²/A²). So v = ±ω√(A² − x²). The speed is greatest (ωA) at x = 0 and zero at x = ±A, where the particle turns back.

Acceleration

The reference particle has centripetal acceleration ω²A directed towards the centre. Its projection on the x-axis, or the derivative of v(t), gives:

a(t) = dv/dt = −ω²A cos(ωt + φ) = −ω²x. The acceleration is proportional to the displacement and always directed towards the mean position. Maximum magnitude ω²A, at the extremes.

When x is positive, a is negative, and when x is negative, a is positive: whatever the position between −A and +A, the acceleration points back towards the centre. This relation, a = −ω²x, is the hallmark of SHM.

Comparing the three graphs

With φ = 0: x = A cos ωt, v = −ωA sin ωt, a = −ω²A cos ωt. All three vary sinusoidally with the same period T, but with different maxima (A, ωA, ω²A) and different phases. The velocity curve is π/2 ahead of the displacement curve, and the acceleration curve differs from the displacement curve by π (they are always opposite in sign).

Displacement, velocity and acceleration in SHM
QuantityExpressionMaximum valueWhere maximumPhase relative to x
Displacement xA cos(ωt + φ)AExtremes0
Velocity v−ωA sin(ωt + φ)ωAMean positionπ/2 ahead
Acceleration a−ω²A cos(ωt + φ)ω²AExtremesπ (opposite)

One cycle of SHM starting from x = +A

  1. x = +A v = 0; a = −ω²A (largest, pointing to the centre).
  2. x = 0, moving left Speed ωA (largest); a = 0.
  3. x = −A v = 0; a = +ω²A.
  4. x = 0, moving right Speed ωA; a = 0; then back to +A.

Then back to step 1: x = +A

Worked example 1: maximum speed and acceleration

A particle moves as x = 0.10 cos 5t (SI units). A = 0.10 m and ω = 5 rad s⁻¹. v_max = ωA = 5 × 0.10 = 0.50 m s⁻¹. a_max = ω²A = 25 × 0.10 = 2.5 m s⁻².

Worked example 2: at a given displacement

For the same particle, find the speed and acceleration when x = 0.06 m. v = ω√(A² − x²) = 5√(0.0100 − 0.0036) = 5√0.0064 = 5 × 0.08 = 0.40 m s⁻¹. a = −ω²x = −25 × 0.06 = −1.5 m s⁻² (towards the mean position).

Worked example 3: at a given time

A body moves as x = 4 cos(πt + π/3) cm. Find x, v and a at t = 1 s. Phase = π + π/3 = 4π/3. x = 4 cos(4π/3) = 4 × (−0.5) = −2.0 cm. v = −4π sin(4π/3) = −4π × (−0.866) ≈ +10.9 cm s⁻¹. a = −π²x = −π² × (−2.0) ≈ +19.7 cm s⁻². The body is left of centre, moving right and accelerating to the right, towards the mean position.

Key takeaways

  • v = −ωA sin(ωt + φ) = ±ω√(A² − x²); v_max = ωA at the mean position.
  • a = −ω²x; |a|max = ω²A at the extremes.
  • Velocity leads displacement by π/2; acceleration is opposite to displacement (phase difference π).
  • All three have the same period.

Check your understanding

  1. 1. A particle performs SHM with amplitude 0.05 m and angular frequency 20 rad s⁻¹. What is its maximum speed?

    1. 0.25 m s⁻¹
    2. 1.0 m s⁻¹
    3. 20 m s⁻¹
    4. 400 m s⁻¹
    Show answer

    Answer: B. v_max = ωA = 20 × 0.05 = 1.0 m s⁻¹. ω²A = 20 m s⁻² is the maximum acceleration, not the speed.

  2. 2. Where is the acceleration of a particle in SHM greatest in magnitude?

    1. At the mean position
    2. At the extreme positions
    3. Halfway between the mean and extreme positions
    4. It is the same everywhere
    Show answer

    Answer: B. a = −ω²x, so |a| is largest where |x| is largest, at x = ±A. At the mean position the acceleration is zero while the speed is largest.

  3. 3. What is the speed of a particle in SHM (amplitude A, angular frequency ω) when its displacement is A/2?

    1. ωA/2
    2. ωA
    3. (√3/2)ωA
    4. (3/4)ωA
    Show answer

    Answer: C. v = ω√(A² − x²) = ω√(A² − A²/4) = ω√(3A²/4) = (√3/2)ωA ≈ 0.87ωA.

  4. 4. What is the phase difference between the displacement and the acceleration of a particle in SHM?

    1. Zero
    2. π/2
    3. π/4
    4. π
    Show answer

    Answer: D. a = −ω²x: the acceleration always has the opposite sign to the displacement, which is a phase difference of π.

  5. 5. Assertion (A): In SHM the acceleration of the particle is always directed towards the mean position. Reason (R): In SHM the acceleration is a = −ω²x.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Because of the minus sign in a = −ω²x, the acceleration is negative when x is positive and positive when x is negative, so it always points towards x = 0. R explains A.

Privacy · Terms · Refunds · Delivery