• Foundation
  • About 18 min
  • 5 practice questions

Microbes in sewage treatment and the meaning of BOD

Describe primary and secondary sewage treatment, explain flocs, activated sludge and anaerobic sludge digesters, and use BOD values to judge how polluted a water sample is.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain what sewage is and why it cannot be released untreated.
  • Describe the physical steps of primary treatment.
  • Describe the biological steps of secondary treatment, including flocs and activated sludge.
  • Define BOD and use BOD values to compare water samples.

Every town produces huge volumes of waste water each day from toilets, kitchens and drains. This municipal waste water, called sewage, is full of organic matter (largely human excreta) and microbes, many of them pathogens. Poured straight into a river, it would use up the oxygen in the water, kill fish and spread water-borne diseases. So sewage is first cleaned in a sewage treatment plant (STP), and the real cleaners are the heterotrophic microbes already present in the sewage.

Primary treatment: physical removal

Primary treatment is purely physical. Floating debris such as plastic, cloth and twigs is removed by passing the sewage through a series of filters. Then grit (soil and small pebbles) is allowed to settle out by sedimentation. All the solids that settle form the primary sludge; the liquid above it, the supernatant, is the primary effluent, which goes on to secondary treatment.

Secondary (biological) treatment

The primary effluent is run into large aeration tanks, where it is stirred mechanically and air is pumped in. With plenty of oxygen, useful aerobic microbes grow vigorously into flocs: masses of bacteria bound together with fungal filaments into a mesh. As they grow, the flocs consume most of the organic matter, which sharply lowers the BOD of the effluent. When the BOD has fallen enough, the liquid is passed into a settling tank, where the flocs sink. This sediment is the activated sludge.

  • A small part of the activated sludge is pumped back into the aeration tank as inoculum, so that the next batch starts with plenty of useful microbes.
  • The major part goes to large anaerobic sludge digesters, where other bacteria that grow without oxygen digest the bacteria and fungi in the sludge.
  • During this digestion the bacteria release a mixture of methane, hydrogen sulphide and carbon dioxide, which is biogas and can be burnt as fuel.
  • The treated effluent from the secondary stage is released into rivers and streams.

Path of sewage through a treatment plant

  1. Raw sewage Organic matter and pathogens.
  2. Primary treatment Filtration and sedimentation remove debris and grit (primary sludge).
  3. Aeration tank Aerobic flocs eat organic matter; BOD falls.
  4. Settling tank Flocs settle as activated sludge; part returned as inoculum.
  5. Anaerobic sludge digester Anaerobic bacteria digest sludge and give biogas.
  6. Treated effluent Released into rivers and streams.

Biochemical oxygen demand (BOD)

BOD is the amount of oxygen that would be used up if all the organic matter in one litre of water were oxidised by bacteria. A BOD test measures how fast microbes in a water sample take up oxygen, so it is an indirect measure of the organic matter in the water. The more organic matter, the more oxygen microbes consume, so the higher the BOD, the greater the polluting potential of the water. Treatment is continued until the BOD has been brought down substantially.

High BOD = much organic matter = highly polluting. Secondary treatment works by letting aerobic microbes eat the organic matter, which lowers the BOD.

Why this matters for Indian rivers

Microbial treatment of sewage has been used for more than a century, and no man-made technology has matched it. As towns grow, sewage is produced faster than new plants are built, and untreated sewage reaching rivers raises pollution and water-borne disease. The Ministry of Environment and Forests started the Ganga Action Plan and Yamuna Action Plan, under which many sewage treatment plants were proposed so that only treated sewage would enter these rivers.

Worked example 1: ranking water samples by BOD

Made-up data for practice: three unlabelled bottles give BOD values of 6 mg/L, 350 mg/L and 25 mg/L. They are known to be clean lake water, raw sewage and secondary effluent from an STP. Reasoning: (1) raw sewage has the most organic matter, so it has the highest BOD, 350 mg/L; (2) secondary treatment removes most organic matter but not all, so the effluent is intermediate, 25 mg/L; (3) clean lake water has the least, 6 mg/L. Conclusion: the 350 mg/L sample is the most polluted. Raw sewage lost (350 − 25) ÷ 350 × 100 ≈ 93% of its BOD in this imagined plant.

Worked example 2: what if the aeration stops?

Suppose the air pumps in an aeration tank break down for a day. Reasoning: (1) flocs are made of aerobic microbes, which need oxygen to grow and to oxidise organic matter; (2) without air, their activity slows and the organic matter is not consumed; (3) the effluent leaving the tank would therefore still have a high BOD. Conclusion: releasing it would pollute the river, so the plant must hold the effluent until aeration is restored.

Key takeaways: sewage is treated by microbes already in it. Primary treatment is physical (filtration and sedimentation) and yields primary sludge and effluent. Secondary treatment is biological: aerobic flocs in aeration tanks eat the organic matter and lower BOD, then settle as activated sludge, part of which is recycled as inoculum and the rest digested anaerobically to give biogas. BOD measures organic pollution indirectly; the higher it is, the more polluting the water.

Check your understanding

  1. 1. What is the key difference between primary and secondary sewage treatment?

    1. Primary treatment uses chlorine, secondary uses filters
    2. Both are biological, but secondary is faster
    3. Primary treatment uses anaerobic bacteria, secondary uses aerobic bacteria
    4. Primary treatment is physical removal of particles, secondary treatment is biological breakdown of organic matter by microbes
    Show answer

    Answer: D. Primary treatment removes debris and grit physically, by filtration and sedimentation. Secondary treatment is biological: aerobic microbes in flocs consume the dissolved and suspended organic matter in aeration tanks.

  2. 2. Flocs in the aeration tank are

    1. masses of bacteria associated with fungal filaments forming a mesh
    2. particles of grit and soil
    3. clumps of algae that release oxygen
    4. dead protozoa that sink to the bottom
    Show answer

    Answer: A. Flocs are mesh-like masses of aerobic bacteria held together with fungal filaments. They grow vigorously in the aerated effluent and consume most of its organic matter.

  3. 3. A small part of the activated sludge is pumped back into the aeration tank because

    1. it releases biogas there
    2. it adds oxygen to the tank
    3. it serves as an inoculum of useful microbes for fresh effluent
    4. it removes grit from the tank
    Show answer

    Answer: C. Activated sludge is made of the settled flocs, rich in useful aerobic microbes. Returning some of it seeds the next batch of effluent, so treatment starts quickly. The rest goes to anaerobic sludge digesters.

  4. 4. Made-up data: sample P has a BOD of 300 mg/L and sample Q has a BOD of 15 mg/L. Which statement is correct?

    1. Q contains more organic matter than P
    2. P is more polluting than Q
    3. Both have the same polluting potential
    4. BOD tells nothing about organic matter
    Show answer

    Answer: B. BOD is an indirect measure of organic matter: more organic matter means microbes use more oxygen. P (300 mg/L) has far more organic matter than Q (15 mg/L), so P has the greater polluting potential.

  5. 5. Which gases are produced in anaerobic sludge digesters?

    1. Oxygen and nitrogen
    2. Methane only
    3. Chlorine and ammonia
    4. Methane, hydrogen sulphide and carbon dioxide
    Show answer

    Answer: D. Anaerobic bacteria digesting the sludge release a mixture of methane, hydrogen sulphide and carbon dioxide. This mixture is biogas, which is inflammable and can be used as fuel.

Sign in to keep track of the lessons you finish.

Next lesson → Microbes as a source of energy: biogas

Privacy · Terms · Refunds · Delivery