Revision notes

Chapter 4 The d- and f-Block Elements: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Transition elements: position, electronic configuration and physical properties

d- and f-block elements

  • d-block (groups 3–12)
    • 3d series: Sc to Zn
    • 4d series: Y to Cd
    • 5d series: La, Hf to Hg
    • 6d series: Ac, Rf to Cn
  • f-block
    • 4f series: lanthanoids, Ce to Lu
    • 5f series: actinoids, Th to Lr
Outer electronic configurations of the 3d series (after [Ar])
ElementScTiVCrMnFeCoNiCuZn
Z21222324252627282930
3d123556781010
4s2221222212
  • Transition metal: incomplete d subshell in the atom or a common ion; Zn, Cd, Hg are not.
  • Configuration (n−1)d¹⁻¹⁰ns¹⁻²; Cr = 3d⁵4s¹, Cu = 3d¹⁰4s¹; ions lose ns electrons first.
  • Strong metallic bonding from d electrons gives high melting points and atomisation enthalpies.
  • Lanthanoid contraction makes 4d and 5d elements of a group nearly equal in size.
Read the full lesson

Lesson 2

Ionisation enthalpies, oxidation states and electrode potentials

Oxidation states shown by 3d metals (most common: Sc +3, Ti +4, V +5/+4, Cr +3/+6, Mn +2/+7, Fe +2/+3, Co +2/+3, Ni +2, Cu +2, Zn +2)
ScTiVCrMnFeCoNiCuZn
+3+2, +3, +4+2 to +5+2 to +6+2 to +7+2, +3, +4, +6+2, +3, +4+2, +3, +4+1, +2+2
Standard electrode potentials of 3d metals (standard data)
CoupleTiVCrMnFeCoNiCuZn
E°(M²⁺/M) / V−1.63−1.18−0.90−1.18−0.44−0.28−0.25+0.34−0.76
E°(M³⁺/M²⁺) / V−0.37−0.26−0.41+1.57+0.77+1.97–––
  • Small, steady rises in ionisation enthalpy allow variable oxidation states differing by one.
  • Mn shows the most states (+2 to +7); stable d⁰, d⁵ and d¹⁰ arrangements explain many irregularities.
  • Cu has positive E°(Cu²⁺/Cu); Mn³⁺ and Co³⁺ are strong oxidants; Cr²⁺, V²⁺, Ti²⁺ are strong reductants.
  • Oxygen and fluorine stabilise the highest oxidation states; oxygen more so, by multiple bonding.
Read the full lesson

Lesson 3

Magnetic properties, colour, complexes, catalysis and alloys

Spin-only formula: μ = √[n(n + 2)] BM, where n is the number of unpaired electrons and BM is the Bohr magneton. One unpaired electron gives 1.73 BM.

Spin-only magnetic moments
Unpaired electrons (n)012345
μ (spin-only) / BM01.732.833.874.905.92
Colours of some aquated 3d ions
Ion (in water)ConfigurationColour
Sc³⁺3d⁰Colourless
Ti³⁺3d¹Purple
V³⁺3d²Green
Cr³⁺3d³Violet
Mn²⁺3d⁵Pale pink
Fe³⁺3d⁵Yellow
Fe²⁺3d⁶Green
Co²⁺3d⁷Pink
Ni²⁺3d⁸Green
Cu²⁺3d⁹Blue
Zn²⁺3d¹⁰Colourless

Fe³⁺ catalysing 2I⁻ + S₂O₈²⁻ → I₂ + 2SO₄²⁻

  1. Step 1 2Fe³⁺ + 2I⁻ → 2Fe²⁺ + I₂
  2. Step 2 2Fe²⁺ + S₂O₈²⁻ → 2Fe³⁺ + 2SO₄²⁻
  3. Catalyst regenerated Fe³⁺ is ready to react with more iodide.

Then back to step 1: Step 1

Two fast steps between oppositely charged ions replace one slow step between two negative ions.
  • μ = √[n(n + 2)] BM; more unpaired electrons, larger moment.
  • Colour comes from d–d transitions; d⁰ and d¹⁰ ions are colourless.
  • Small size, high charge and vacant d orbitals favour complexes.
  • Variable oxidation states and surface bonding make transition metals good catalysts; small atoms in their lattices give hard, inert interstitial compounds.
Read the full lesson

Lesson 4

Potassium dichromate and potassium permanganate

Lowest oxide is basic; highest oxide is acidic (or amphoteric). Example: MnO is basic, Mn₂O₇ is acidic.

Making potassium dichromate

  1. Chromite ore, FeCr₂O₄ Fused with Na₂CO₃ in air
  2. Sodium chromate, Na₂CrO₄ Yellow solution, filtered
  3. Sodium dichromate, Na₂Cr₂O₇ Formed on acidifying with H₂SO₄
  4. Potassium dichromate, K₂Cr₂O₇ Crystallised after adding KCl
Oxidations by permanganate
MediumReducing agentProduct of the reducing agent
AcidicI⁻I₂
AcidicFe²⁺ (green)Fe³⁺ (yellow)
Acidic, at 333 KOxalate C₂O₄²⁻CO₂
AcidicH₂SS
AcidicSO₃²⁻SO₄²⁻
AcidicNO₂⁻NO₃⁻
Neutral or faintly alkalineI⁻IO₃⁻ (permanganate → MnO₂)
Neutral or faintly alkalineS₂O₃²⁻SO₄²⁻
Neutral (ZnSO₄ catalyst)Mn²⁺MnO₂
  • Higher oxidation state → more covalent, more acidic oxide.
  • K₂Cr₂O₇: chromite → Na₂CrO₄ → Na₂Cr₂O₇ → K₂Cr₂O₇; orange dichromate ⇌ yellow chromate with pH.
  • KMnO₄: MnO₂ → K₂MnO₄ (green) → KMnO₄ (purple); tetrahedral ions.
  • In acid: 1 MnO₄⁻ takes 5 e⁻; 1 Cr₂O₇²⁻ takes 6 e⁻.
Read the full lesson

Lesson 5

Lanthanoids, actinoids and uses of d- and f-block elements

Lanthanoid ions other than +3 (Pr, Nd and Dy also show +4, but only in oxides MO₂)
IonConfigurationBehaviour
Ce⁴⁺4f⁰ (noble gas core)Strong oxidant, returns to +3; E°(Ce⁴⁺/Ce³⁺) = +1.74 V, but reacts slowly with water, so useful in analysis
Eu²⁺4f⁷Strong reducing agent, changes to +3
Yb²⁺4f¹⁴Reducing agent
Tb⁴⁺4f⁷Oxidising agent
Sm²⁺4f⁶Like europium, shows both +2 and +3

Lanthanoids and actinoids compared

  • Lanthanoids (4f)
    • Mostly non-radioactive (Pm is the exception)
    • Mainly +3; a few +2 and +4
    • Contraction smaller from element to element
    • 4f electrons buried, little part in bonding
    • Less tendency to form complexes
  • Actinoids (5f)
    • All radioactive
    • +3 common, with a wide range up to +7
    • Contraction larger from element to element
    • 5f electrons take more part in bonding
    • Greater tendency to form complexes; magnetic behaviour more complex
  • Ln³⁺ = [Xe]4fⁿ; +3 is the main state; Ce⁴⁺ (f⁰), Eu²⁺ (f⁷), Yb²⁺ (f¹⁴), Tb⁴⁺ (f⁷) are special cases.
  • Lanthanoid contraction: steady size decrease from poor 4f shielding; makes Zr and Hf nearly identical.
  • Actinoids: all radioactive, many oxidation states (up to +7), larger contraction.
  • d- and f-block elements are vital in steels, catalysts, batteries, pigments and alloys.
Read the full lesson

Privacy · Terms · Refunds · Delivery