- Foundation
- About 20 min
- 5 practice questions
Ionisation enthalpies, oxidation states and electrode potentials
Explain the trends in ionisation enthalpy across the 3d series, why transition metals show variable oxidation states, how E° values for M²⁺/M and M³⁺/M²⁺ reflect stability, and why oxides and fluorides show the highest oxidation states.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain the irregular trends in first, second and third ionisation enthalpies using d-electron stability.
- List the oxidation states of 3d metals and explain why Mn shows the most.
- Use E°(M²⁺/M) and E°(M³⁺/M²⁺) values to compare reducing and oxidising power.
- Explain disproportionation (e.g. of Cu⁺) and why oxygen and fluorine stabilise high oxidation states.
Manganese can be found as +2 in a pale pink salt, +4 in the black MnO₂ of dry cells and +7 in purple permanganate. Calcium, by contrast, is always +2. Why can transition metals change their oxidation state so easily? The answer comes from ionisation enthalpies and the special stability of certain d configurations.
Ionisation enthalpies
Across each series the ionisation enthalpy generally increases, because the nuclear charge rises as electrons enter inner d orbitals. But the increase is much smaller than across a period of main-group elements, and successive ionisation enthalpies rise less steeply. Losing a variable number of electrons is therefore not too costly, which is the root of variable oxidation states.
The trend has breaks. Ionisation enthalpy depends on attraction to the nucleus, repulsion between electrons and exchange energy, which stabilises parallel spins in degenerate orbitals (Hund's rule) and is lost when an electron is removed. Ionising a stable d⁵ or d¹⁰ ion costs extra energy. So the third ionisation enthalpy of Mn (Mn²⁺ d⁵ → Mn³⁺ d⁴) is unusually high, while that of Fe (Fe²⁺ d⁶ → Fe³⁺ d⁵) is lower. The second ionisation enthalpies of Cr and Cu are unusually high because Cr⁺ is d⁵ and Cu⁺ is d¹⁰. Zn's second ionisation enthalpy is relatively low because it removes a 4s electron to leave stable d¹⁰. The high third ionisation enthalpies of Cu, Ni and Zn explain why they rarely go beyond +2.
Oxidation states
| Sc | Ti | V | Cr | Mn | Fe | Co | Ni | Cu | Zn |
|---|---|---|---|---|---|---|---|---|---|
| +3 | +2, +3, +4 | +2 to +5 | +2 to +6 | +2 to +7 | +2, +3, +4, +6 | +2, +3, +4 | +2, +3, +4 | +1, +2 | +2 |
- The greatest variety occurs in the middle of the series; manganese shows every state from +2 to +7.
- At the start there are too few electrons to lose (Sc is only +3; Ti(IV) is more stable than Ti(III) or Ti(II)); at the end there are too many d electrons and too few vacant orbitals (Cu +1, +2; Zn only +2).
- Up to manganese, the highest stable state equals the total of s and d electrons: TiO₂ (+4), VO₂⁺ (+5), CrO₄²⁻ (+6), MnO₄⁻ (+7). After that, high states become rare.
- Transition-metal oxidation states usually differ by one unit (V²⁺, V³⁺, VO²⁺, VO₂⁺), whereas p-block states usually differ by two.
- In the d-block, heavier members of a group favour higher states (Mo(VI) and W(VI) are more stable than Cr(VI)), the opposite of the inert pair effect in the p-block.
- Very low states, even zero, occur in complexes with π-accepting ligands: Ni(CO)₄ and Fe(CO)₅ contain Ni(0) and Fe(0).
Worked example 1: oxidation numbers in oxoanions
Find the oxidation state of the metal in (a) Cr₂O₇²⁻, (b) MnO₄⁻, (c) MnO₄²⁻.
(a) 2x + 7(−2) = −2 → 2x = 12 → x = +6.
(b) x + 4(−2) = −1 → x = +7.
(c) x + 4(−2) = −2 → x = +6. In each case the metal reaches its group number or close to it, which is possible only because oxygen stabilises high oxidation states.
Standard electrode potentials
E°(M²⁺/M) depends on the enthalpy of atomisation, the sum of the first two ionisation enthalpies and the hydration enthalpy of M²⁺. Across the 3d series the values become generally less negative as ionisation enthalpies rise, but with irregularities.
| Couple | Ti | V | Cr | Mn | Fe | Co | Ni | Cu | Zn |
|---|---|---|---|---|---|---|---|---|---|
| E°(M²⁺/M) / V | −1.63 | −1.18 | −0.90 | −1.18 | −0.44 | −0.28 | −0.25 | +0.34 | −0.76 |
| E°(M³⁺/M²⁺) / V | −0.37 | −0.26 | −0.41 | +1.57 | +0.77 | +1.97 | – | – | – |
- Copper alone has a positive E°(M²⁺/M): its high atomisation and ionisation enthalpies are not repaid by hydration enthalpy, so Cu does not liberate H₂ from acids; only oxidising acids (nitric, hot concentrated sulphuric) attack it.
- Mn, Ni and Zn are more negative than the trend predicts: the d⁵ stability of Mn²⁺, the d¹⁰ stability of Zn²⁺ and the very negative hydration enthalpy of Ni²⁺.
- The high E°(Mn³⁺/Mn²⁺) = +1.57 V shows Mn²⁺ (d⁵) is very stable, so Mn³⁺ is a strong oxidising agent; the low value for Fe³⁺/Fe²⁺ (+0.77 V) reflects the extra stability of Fe³⁺ (d⁵).
- Ti²⁺, V²⁺ and Cr²⁺ are strong reducing agents; Cr²⁺ even liberates H₂ from dilute acid: 2Cr²⁺ + 2H⁺ → 2Cr³⁺ + H₂.
Worked example 2: Cr²⁺ versus Mn³⁺ (both d⁴)
Why is Cr²⁺ reducing but Mn³⁺ oxidising, although both are d⁴?
Cr²⁺ → Cr³⁺ changes d⁴ to d³, which in water has a half-filled t₂g set of orbitals (a stable arrangement, Unit 5); E°(Cr³⁺/Cr²⁺) = −0.41 V, so Cr²⁺ readily gives up an electron: reducing.
Mn³⁺ → Mn²⁺ changes d⁴ to d⁵, the extra-stable half-filled set; E°(Mn³⁺/Mn²⁺) = +1.57 V, so Mn³⁺ readily accepts an electron: oxidising.
Worked example 3: disproportionation of Cu⁺
Show that Cu⁺ is unstable in water. Data: E°(Cu⁺/Cu) = +0.52 V; E°(Cu²⁺/Cu⁺) = +0.15 V.
Disproportionation: 2Cu⁺(aq) → Cu²⁺(aq) + Cu(s). One Cu⁺ is reduced (cathode, Cu⁺/Cu) and one is oxidised (anode, Cu²⁺/Cu⁺).
E°cell = 0.52 − 0.15 = +0.37 V, positive, so the reaction is spontaneous. The underlying reason is the much more negative hydration enthalpy of the small, doubly charged Cu²⁺ ion, which more than pays for copper's second ionisation enthalpy. Similarly, Mn(VI) disproportionates in acid: 3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O.
Stability of high oxidation states: halides and oxides
The highest oxidation states appear in fluorides and oxides: TiX₄, VF₅ and CrF₆ among halides, and Sc₂O₃ up to Mn₂O₇ among oxides, where the oxidation number equals the group number. Fluorine stabilises high states through high lattice energy (CoF₃) or strong bonds in covalent compounds (VF₅, CrF₆). Oxygen is even better, because it can form multiple bonds to the metal: the highest manganese fluoride is MnF₄ (+4), but the highest oxide is Mn₂O₇ (+7). Cu(II) halides are known except the iodide, because Cu²⁺ oxidises iodide: 2Cu²⁺ + 4I⁻ → Cu₂I₂(s) + I₂.
Key takeaways
- Small, steady rises in ionisation enthalpy allow variable oxidation states differing by one.
- Mn shows the most states (+2 to +7); stable d⁰, d⁵ and d¹⁰ arrangements explain many irregularities.
- Cu has positive E°(Cu²⁺/Cu); Mn³⁺ and Co³⁺ are strong oxidants; Cr²⁺, V²⁺, Ti²⁺ are strong reductants.
- Oxygen and fluorine stabilise the highest oxidation states; oxygen more so, by multiple bonding.
Check your understanding
-
1. Which 3d element shows the largest number of oxidation states?
- Iron
- Chromium
- Manganese
- Copper
Show answer
Answer: C. Manganese (3d⁵ 4s²) has seven electrons that can be lost or shared and shows every oxidation state from +2 to +7, more than any other 3d metal.
-
2. What is the oxidation state of vanadium in VO₂⁺?
- +5
- +4
- +3
- +2
Show answer
Answer: A. x + 2(−2) = +1, so x = +5. VO₂⁺ is the oxocation that stabilises vanadium(V).
-
3. Why is the third ionisation enthalpy of manganese unusually high?
- Mn²⁺ has a 4s² configuration
- Removing the third electron breaks the stable half-filled d⁵ configuration of Mn²⁺
- Manganese has the smallest atomic radius in the series
- Mn³⁺ has a d¹⁰ configuration
Show answer
Answer: B. Mn²⁺ is 3d⁵, a half-filled set stabilised by maximum exchange energy. Removing an electron to form Mn³⁺ (d⁴) loses this stability, so it needs extra energy.
-
4. Which of these is the strongest reducing agent in aqueous solution? E°(M³⁺/M²⁺): Cr −0.41 V, Fe +0.77 V, Mn +1.57 V, Co +1.97 V.
- Co²⁺
- Mn²⁺
- Fe²⁺
- Cr²⁺
Show answer
Answer: D. The most negative E°(M³⁺/M²⁺) means M²⁺ is most easily oxidised to M³⁺, i.e. it is the strongest reducing agent. Cr³⁺/Cr²⁺ is −0.41 V, the most negative, so Cr²⁺ is the strongest reductant.
-
5. Assertion (A): The highest oxidation state of manganese is found in its oxide Mn₂O₇ rather than in a fluoride. Reason (R): Oxygen can form multiple bonds with the metal, whereas fluorine forms only single bonds.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. The highest manganese fluoride is MnF₄, but Mn₂O₇ contains Mn(VII). Oxygen's ability to form Mn=O multiple bonds lets it stabilise more positive charge on the metal. R explains A.
Sign in to keep track of the lessons you finish.