• Foundation
  • About 20 min
  • 5 practice questions

Proteins: amino acids, peptide bonds and protein structure

Classify α-amino acids, explain zwitter ions and their amphoteric, optically active nature, describe peptide bond formation, distinguish fibrous and globular proteins, describe the four levels of protein structure and explain denaturation.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe α-amino acids, their classification as acidic, basic or neutral and as essential or non-essential.
  • Explain zwitter ions, high melting points, solubility and amphoteric behaviour of amino acids.
  • Show how peptide bonds form and count peptide bonds, peptides and molar masses.
  • Describe primary, secondary (α-helix, β-pleated sheet), tertiary and quaternary structure, and denaturation.

Proteins are the most abundant biomolecules in living systems, found in every part of the body and needed for growth and repair. Milk, cheese, pulses, peanuts, fish and meat are rich sources. The name comes from the Greek 'proteios', meaning primary or of prime importance. Every protein is a polymer of α-amino acids.

α-Amino acids

Amino acids contain an amino group (–NH₂) and a carboxyl group (–COOH). In α-amino acids, the type obtained from proteins, both are on the same carbon: R–CH(NH₂)–COOH, where R is the side chain. They have trivial names (glycine from the Greek for sweet; tyrosine from the Greek for cheese) and three-letter and one-letter symbols, e.g. glycine (Gly, G, R = H), alanine (Ala, A, R = CH₃), valine (Val, V), lysine (Lys, K), glutamic acid (Glu, E), cysteine (Cys, C, R = CH₂SH).

  • Neutral, acidic or basic: equal numbers of –NH₂ and –COOH make an amino acid neutral (glycine, alanine); more –COOH makes it acidic (aspartic acid, glutamic acid); more –NH₂ makes it basic (lysine, arginine).
  • Essential amino acids cannot be made in the body and must come from the diet: valine, leucine, isoleucine, arginine, lysine, threonine, methionine, phenylalanine, tryptophan and histidine. Non-essential ones (such as glycine, alanine, serine) are made in the body.

Zwitter ions and properties

Amino acids are colourless, crystalline, water-soluble, high-melting solids that behave like salts rather than like simple amines or acids. In water the –COOH loses a proton and the –NH₂ gains one, giving a dipolar ion, the zwitter ion: H₃N⁺–CHR–COO⁻. It is neutral overall but carries both charges. In this form an amino acid is amphoteric: the –COO⁻ end reacts with acids and the –NH₃⁺ end with bases. Except glycine (R = H), all natural α-amino acids are optically active, because the α-carbon is asymmetric; most natural ones have the L-configuration (–NH₂ drawn on the left).

Peptide bonds and peptides

The –COOH of one amino acid and the –NH₂ of another combine with loss of water to form an amide link, –CO–NH–, the peptide bond. Glycine's carboxyl group with alanine's amino group gives the dipeptide glycylalanine (Gly-Ala). Three amino acids give a tripeptide with two peptide bonds, and so on; more than ten give a polypeptide. A polypeptide with more than a hundred residues and molar mass above 10 000 u is called a protein, although the boundary is not sharp: insulin, with only 51 amino acids, is called a protein because it has a well-defined protein-like shape.

Worked example 1: peptide arithmetic

(a) What is the molar mass of glycylalanine? (glycine 75, alanine 89 g mol⁻¹) (b) How many peptide bonds are there in a pentapeptide? (c) How many different dipeptides can be made from glycine and alanine?
(a) Gly + Ala − H₂O = 75 + 89 − 18 = 146 g mol⁻¹.
(b) n amino acids are joined by n − 1 peptide bonds: 5 − 1 = 4.
(c) The N-terminal and C-terminal positions differ, so Gly-Gly, Gly-Ala, Ala-Gly and Ala-Ala: 4 dipeptides. Order matters, which is why sequence defines a protein.

Fibrous and globular proteins

Two shapes of proteins

  • Fibrous proteins
    • Polypeptide chains run parallel
    • Held by hydrogen and disulphide bonds
    • Fibre-like; usually insoluble in water
    • Keratin (hair, wool, silk), myosin (muscle)
  • Globular proteins
    • Chains coil into a roughly spherical shape
    • Usually soluble in water
    • Insulin, albumins
    • Most enzymes are globular

Levels of protein structure

  • Primary structure: the sequence of amino acids in each polypeptide chain. Changing even one amino acid gives a different protein.
  • Secondary structure: the regular folding of the backbone, held by hydrogen bonds between C=O and –NH– groups of peptide bonds. In the α-helix the chain twists into a right-handed screw, each –NH hydrogen-bonded to a C=O on the next turn. In the β-pleated sheet chains are stretched out almost fully and laid side by side, held by intermolecular hydrogen bonds, like the folds of a drapery.
  • Tertiary structure: the overall folding of the chain, giving fibrous or globular shapes, stabilised by hydrogen bonds, disulphide links, van der Waals forces and electrostatic attractions.
  • Quaternary structure: the arrangement of two or more polypeptide sub-units in a protein, as in haemoglobin.

Denaturation

A protein in its natural shape with biological activity is a native protein. A physical change (heat) or a chemical change (pH) disturbs the hydrogen bonds; globules unfold, helices uncoil and the protein loses its biological activity. This is denaturation. The secondary and tertiary structures are destroyed but the primary structure (sequence) remains. Examples: egg white coagulates on boiling; milk curdles when bacteria produce lactic acid.

Worked example 2: reasoning about properties

Why does glycine (75 g mol⁻¹) melt with decomposition above 500 K while chloroacetic acid (94.5 g mol⁻¹) melts at about 336 K?

Glycine exists as the zwitter ion H₃N⁺CH₂COO⁻, so its crystal is held by strong ionic (electrostatic) attractions, like a salt. Chloroacetic acid is a neutral molecule held by hydrogen bonds and dipole forces. The salt-like lattice needs far more energy to break, so glycine melts much higher and is also more soluble in water.

Key takeaways

  • Proteins are polymers of α-amino acids; 10 essential amino acids must come from the diet.
  • Amino acids exist as zwitter ions: salt-like, high-melting, water-soluble, amphoteric; all except glycine are optically active (mostly L).
  • Peptide bond –CO–NH–; n amino acids have n − 1 peptide bonds.
  • Primary = sequence; secondary = α-helix/β-sheet (H-bonds); tertiary = overall fold; quaternary = sub-units. Denaturation destroys 2° and 3° structure, not 1°.

Check your understanding

  1. 1. Why are amino acids high-melting solids that dissolve in water?

    1. They are non-polar
    2. They exist as zwitter ions and behave like salts
    3. They have very high molar masses
    4. They contain no hydrogen bonds
    Show answer

    Answer: B. In the solid and in water, amino acids exist as dipolar ions, H₃N⁺–CHR–COO⁻. Strong electrostatic attractions between these ions give a salt-like, high-melting solid that dissolves well in polar water.

  2. 2. Which amino acid is not optically active?

    1. Alanine
    2. Valine
    3. Glycine
    4. Lysine
    Show answer

    Answer: C. In glycine, R = H, so the α-carbon carries two hydrogen atoms and is not asymmetric. All other natural α-amino acids have four different groups on the α-carbon.

  3. 3. How many peptide bonds are present in a hexapeptide?

    1. 6
    2. 5
    3. 7
    4. 4
    Show answer

    Answer: B. Six amino acids in a chain are joined by 6 − 1 = 5 peptide bonds.

  4. 4. Which bonds mainly stabilise the α-helix structure of a protein?

    1. Hydrogen bonds between C=O and N–H groups of the backbone
    2. Peptide bonds only
    3. Disulphide bonds only
    4. Ionic bonds between side chains only
    Show answer

    Answer: A. In the α-helix each –NH of the backbone forms a hydrogen bond with a C=O group on the next turn of the right-handed helix. These regular hydrogen bonds hold the secondary structure.

  5. 5. Assertion (A): When an egg is boiled, the protein coagulates but its sequence of amino acids is unchanged. Reason (R): Denaturation destroys the secondary and tertiary structure of a protein but leaves the primary structure intact.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Heating breaks the hydrogen bonds that hold the folded shape, so the globules unfold and coagulate, but the peptide bonds (primary structure) are not broken. R explains A.

Sign in to keep track of the lessons you finish.

Next lesson → Enzymes and vitamins

Privacy · Terms · Refunds · Delivery