• Foundation
  • About 16 min
  • 5 practice questions

Curves below the x-axis and curves that cross it

Handle regions where the curve lies below the x-axis by taking the absolute value of the integral, and split the interval at the points where a curve crosses the axis.

If something looks wrong, please tell us.

A definite integral and an area are not always the same number. When a curve dips below the x-axis, the definite integral counts that part as negative, but an area can never be negative. This lesson shows how to get the true area in such cases, a point that causes many lost marks.

When the curve is below the x-axis

If f(x) < 0 for a ≤ x ≤ b, every strip has height y = f(x) < 0, so y dx is negative and ∫ₐᵇ f(x) dx comes out negative. The area of the region is still a positive number: it is the numerical (absolute) value of the integral. So in this case A = |∫ₐᵇ f(x) dx|.

When the curve crosses the x-axis

Often part of the curve is below the axis and part above. Suppose f(x) ≤ 0 on [a, c] and f(x) ≥ 0 on [c, b]. Then ∫ₐᶜ f(x) dx = A₁ is negative and the integral from c to b, call it A₂, is positive. The total area is A = |A₁| + A₂. Integrating straight from a to b would give A₁ + A₂, in which the negative part cancels some of the positive part, so it is not the area.

Area when a curve may cross the x-axis

  1. Solve f(x) = 0 to find crossing points in [a, b]
  2. Split [a, b] at those points
  3. Integrate f over each piece separately
  4. Take the absolute value of each result
  5. Add the absolute values
Never integrate straight across a crossing point when you want an area.

Area = sum of |∫ f(x) dx| over the pieces between consecutive zeros of f. A signed integral can be smaller than the area, or even zero.

Worked examples

Worked example 1: entirely below the axis

Find the area bounded by y = x² − 4, the x-axis and the lines x = 0 and x = 2. For 0 ≤ x < 2, x² − 4 < 0, so the curve is below the axis. ∫₀² (x² − 4) dx = [x³/3 − 4x]₀² = 8/3 − 8 = −16/3. The area is |−16/3| = 16/3 square units.

Worked example 2: a line that crosses the axis

Find the area bounded by y = 2x − 2, the x-axis and the lines x = 0 and x = 3. The line meets the x-axis where 2x − 2 = 0, i.e. x = 1. It is below the axis on [0, 1) and above it on (1, 3]. First piece: ∫₀¹ (2x − 2) dx = [x² − 2x]₀¹ = 1 − 2 = −1, so its area is 1. Second piece: ∫₁³ (2x − 2) dx = [x² − 2x]₁³ = (9 − 6) − (1 − 2) = 3 + 1 = 4. Total area = 1 + 4 = 5 square units. Compare: ∫₀³ (2x − 2) dx = 3, which is wrong as an area. Geometry confirms the answer: two triangles, with areas (1/2)(1)(2) = 1 and (1/2)(2)(4) = 4.

Worked example 3: a cubic

Find the area bounded by y = x³, the x-axis and the lines x = −1 and x = 2. The curve crosses the axis at x = 0, below it for x < 0 and above it for x > 0. ∫₋₁⁰ x³ dx = [x⁴/4]₋₁⁰ = 0 − 1/4 = −1/4, area 1/4. ∫₀² x³ dx = [x⁴/4]₀² = 4. Total area = 1/4 + 4 = 17/4 square units. The signed integral from −1 to 2 is 4 − 1/4 = 15/4, which is not the area.

Worked example 4: a trigonometric curve

Find the area bounded by y = sin 2x and the x-axis from x = 0 to x = π. sin 2x = 0 at x = 0, π/2, π; it is positive on (0, π/2) and negative on (π/2, π). ∫ from 0 to π/2 of sin 2x dx = [−(cos 2x)/2] = −(cos π)/2 + (cos 0)/2 = 1/2 + 1/2 = 1. ∫ from π/2 to π of sin 2x dx = −(cos 2π)/2 + (cos π)/2 = −1/2 − 1/2 = −1, area 1. Total area = 2 square units, although ∫₀^π sin 2x dx = 0.

Signed integral versus area
Curve and intervalSigned integralArea (sq. units)
y = x² − 4, x = 0 to 2−16/316/3
y = 2x − 2, x = 0 to 335
y = x³, x = −1 to 215/417/4
y = sin 2x, x = 0 to π02

Key takeaways

  • Below the x-axis the integral is negative; the area is its absolute value.
  • Find where f(x) = 0 inside the interval and split there.
  • Total area = sum of the absolute values of the pieces.
  • A signed integral of zero does not mean zero area.
  • A sketch, even a rough one, shows where the curve is above or below the axis.

Check your understanding

  1. 1. What is the area bounded by y = x² − 1, the x-axis and the lines x = 0 and x = 1?

    1. −2/3
    2. 2/3
    3. 4/3
    4. 1/3
    Show answer

    Answer: B. On [0, 1), x² − 1 < 0. ∫₀¹ (x² − 1) dx = 1/3 − 1 = −2/3. An area is never negative, so the area is |−2/3| = 2/3 square units.

  2. 2. What is the area bounded by y = sin x and the x-axis from x = 0 to x = 3π/2?

    1. 1
    2. 2
    3. 3
    4. 4
    Show answer

    Answer: C. From 0 to π, ∫ sin x dx = [−cos x] = 1 + 1 = 2. From π to 3π/2, ∫ sin x dx = −cos(3π/2) + cos π = 0 − 1 = −1, area 1. Total area = 2 + 1 = 3.

  3. 3. What is the area bounded by y = x³ and the x-axis between x = −2 and x = 2?

    1. 0
    2. 4
    3. 16
    4. 8
    Show answer

    Answer: D. ∫₀² x³ dx = [x⁴/4]₀² = 4, and by symmetry the piece from −2 to 0 gives −4, area 4. Total area = 4 + 4 = 8 square units, even though the signed integral is 0.

  4. 4. What is the area bounded by y = 2x − 4, the x-axis and the lines x = 0 and x = 3?

    1. 5
    2. 3
    3. 1
    4. 4
    Show answer

    Answer: A. The line crosses the axis at x = 2. ∫₀² (2x − 4) dx = [x² − 4x]₀² = −4, area 4. ∫₂³ (2x − 4) dx = (9 − 12) − (4 − 8) = 1. Total area = 4 + 1 = 5.

  5. 5. Assertion (A): The area bounded by y = cos x and the x-axis from x = 0 to x = π equals ∫ from 0 to π of cos x dx. Reason (R): When part of a curve lies below the x-axis, the definite integral over that part is negative.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: D. R is true. Because of R, A is false: ∫ from 0 to π of cos x dx = sin π − sin 0 = 0, but the area is 1 (from 0 to π/2) + 1 (from π/2 to π) = 2 square units.

Sign in to keep track of the lessons you finish.

Next lesson → Area of a circle and an ellipse

Privacy · Terms · Refunds · Delivery