• Foundation
  • About 20 min
  • 5 practice questions

Homogeneous differential equations

Recognise homogeneous functions and homogeneous differential equations, and solve them with the substitution y = vx (or x = vy), which turns them into variable separable equations.

If something looks wrong, please tell us.

Some equations, such as dy/dx = (x + y)/x, cannot be separated as they stand. But their right side depends only on the ratio y/x. A clever substitution then makes the variables separate. These are the homogeneous differential equations.

Homogeneous functions

A function F(x, y) is called a homogeneous function of degree n if F(λx, λy) = λⁿ F(x, y) for every non-zero constant λ. For example:

  • F(x, y) = x² + 3xy: F(λx, λy) = λ²x² + 3λ²xy = λ² F(x, y), homogeneous of degree 2.
  • F(x, y) = 4x − 5y: F(λx, λy) = λ F(x, y), degree 1.
  • F(x, y) = (x − y)/(x + y): F(λx, λy) = λ(x − y)/[λ(x + y)] = λ⁰ F(x, y), degree 0.
  • F(x, y) = cos(y/x): unchanged when x and y are scaled, degree 0.
  • F(x, y) = x + sin y: no n works, so it is not homogeneous.

A homogeneous function of degree n can be written as F(x, y) = xⁿ g(y/x) (or yⁿ h(x/y)). For instance, x² + 3xy = x²[1 + 3(y/x)]. In particular, a function of degree 0 depends only on y/x.

Homogeneous differential equations and the substitution y = vx

A differential equation dy/dx = F(x, y) is called homogeneous if F(x, y) is a homogeneous function of degree zero. Then dy/dx = g(y/x). Put y = vx, where v is a new function of x. By the product rule, dy/dx = v + x (dv/dx). The equation becomes v + x (dv/dx) = g(v), i.e. x (dv/dx) = g(v) − v. This separates: dv/[g(v) − v] = dx/x. Integrate, then replace v by y/x.

If the equation is given in the form dx/dy = F(x, y) with F homogeneous of degree zero, write F = h(x/y) and use x = vy instead, so that dx/dy = v + y (dv/dy).

Solving a homogeneous equation

  1. Write as dy/dx = F(x, y)
  2. Check F(λx, λy) = F(x, y) (degree zero)
  3. Put y = vx and dy/dx = v + x dv/dx
  4. Separate v and x; integrate
  5. Replace v by y/x; apply any condition

For dy/dx = g(y/x): put y = vx, dy/dx = v + x dv/dx. For dx/dy = h(x/y): put x = vy, dx/dy = v + y dv/dy.

Worked examples

Worked example 1

Solve dy/dx = (x + y)/x. Here F(λx, λy) = (λx + λy)/(λx) = F(x, y), so the equation is homogeneous, with dy/dx = 1 + y/x. Put y = vx: v + x (dv/dx) = 1 + v, so x (dv/dx) = 1, i.e. dv = dx/x. Integrating, v = log |x| + C. Replacing v by y/x: y = x log |x| + Cx.

Worked example 2

Solve 2xy (dy/dx) = y² − x², i.e. dy/dx = (y² − x²)/(2xy). Numerator and denominator both have degree 2, so F has degree 0. Put y = vx: v + x (dv/dx) = (v²x² − x²)/(2vx²) = (v² − 1)/(2v). Then x (dv/dx) = (v² − 1)/(2v) − v = (v² − 1 − 2v²)/(2v) = −(1 + v²)/(2v). Separate: 2v dv/(1 + v²) = −dx/x. Integrate: log(1 + v²) = −log |x| + log |C|, so (1 + v²) x = C. With v = y/x: (1 + y²/x²) x = C, i.e. x² + y² = Cx. The solution curves are circles passing through the origin with centres on the x-axis.

Worked example 3: a particular solution

Solve dy/dx = y/x + tan(y/x), given y = π/2 when x = 1. The right side depends only on y/x, so the equation is homogeneous. Put y = vx: v + x (dv/dx) = v + tan v, so x (dv/dx) = tan v, i.e. cot v dv = dx/x. Integrating, log |sin v| = log |x| + log |C|, so sin v = Cx, that is sin(y/x) = Cx. Using x = 1, y = π/2: sin(π/2) = 1 = C. The particular solution is sin(y/x) = x.

Worked example 4: using x = vy

Solve dx/dy = (x + y)/y, i.e. dx/dy = x/y + 1. Put x = vy: v + y (dv/dy) = v + 1, so dv = dy/y and v = log |y| + C. Hence x = y log |y| + Cy. This is worked example 1 with the roles of x and y exchanged.

Key takeaways

  • F is homogeneous of degree n if F(λx, λy) = λⁿ F(x, y).
  • dy/dx = F(x, y) is homogeneous when F has degree zero, i.e. F depends only on y/x.
  • Substitute y = vx and dy/dx = v + x dv/dx; the equation becomes variable separable.
  • Use x = vy when the equation is given as dx/dy = h(x/y).
  • Always substitute back y/x for v at the end.

Check your understanding

  1. 1. Which function is homogeneous of degree 2?

    1. x² + y
    2. x² + xy + y²
    3. x³ + y²
    4. x² + sin y
    Show answer

    Answer: B. Replacing x, y by λx, λy in x² + xy + y² gives λ²(x² + xy + y²). In each of the other functions the terms have different degrees (or contain sin y), so no single power of λ comes out.

  2. 2. Which differential equation is homogeneous?

    1. dy/dx = (x + y + 1)/(x − y)
    2. dy/dx = x² + y
    3. dy/dx = (x² + y²)/(xy)
    4. dy/dx = (x + 2)/(y − 3)
    Show answer

    Answer: C. (x² + y²)/(xy) is unchanged when x and y are replaced by λx and λy (λ² cancels), so it is homogeneous of degree zero. The constants 1, 2 and 3 in the others spoil homogeneity, and x² + y has mixed degrees.

  3. 3. A homogeneous equation given in the form dx/dy = h(x/y) is best solved by the substitution

    1. y = vx
    2. x = vy
    3. y = v + x
    4. x = v/y
    Show answer

    Answer: B. When x/y is the natural ratio, put x = vy, so that dx/dy = v + y dv/dy and the equation separates in v and y.

  4. 4. What is the general solution of dy/dx = 1 + y/x?

    1. y = log |x| + C
    2. y = x + Cx²
    3. y = Cx eˣ
    4. y = x log |x| + Cx
    Show answer

    Answer: D. Put y = vx: v + x dv/dx = 1 + v, so dv = dx/x and v = log |x| + C. Then y = vx = x log |x| + Cx.

  5. 5. Assertion (A): The differential equation dy/dx = (x − y)/(x + y) is homogeneous. Reason (R): F(x, y) = (x − y)/(x + y) satisfies F(λx, λy) = λ⁰ F(x, y) for every non-zero λ.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. F(λx, λy) = λ(x − y)/[λ(x + y)] = F(x, y) = λ⁰ F(x, y), so F is homogeneous of degree zero (R true). That is precisely the condition for the equation to be homogeneous, so R explains A.

Privacy · Terms · Refunds · Delivery