- Foundation
- About 22 min
- 5 practice questions
Electric field, field lines and electric flux
Define the electric field E = F/q, calculate the field of point charges and groups of charges, read and draw field-line patterns with their properties, and compute electric flux Δφ = E ΔS cos θ.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define electric field and give its SI unit.
- Calculate E for a point charge and, by superposition, for several charges.
- Describe the motion of a charged particle in a uniform field.
- State the properties of electric field lines and sketch common patterns.
- Define electric flux and calculate it for a flat surface.
Coulomb's law tells us the force between two charges, but it leaves a puzzle: how does a charge 'know' that another charge is nearby? The answer used throughout physics is the field. A charge sets up an electric field in all the space around it, and any other charge placed in that field feels a force from the field right where it is.
Defining the electric field
Place a small positive test charge q at a point near a source charge Q. If it feels a force F, the electric field at that point is the force per unit positive charge. The test charge must be very small so that it does not disturb the source, so strictly:
E = lim (q → 0) F/q. SI unit: N C⁻¹ (equivalently V m⁻¹). A charge q placed in a field E feels F = qE.
E is a vector. It depends on the source charges and the position, not on the test charge, because F is proportional to q. For a single point charge Q, dividing Coulomb's force by q gives:
E = (1/4πε₀) Q/r², directed radially outward for positive Q and radially inward for negative Q.
The field of a point charge has the same magnitude everywhere on a sphere centred on the charge - it is spherically symmetric. For a group of charges q₁, q₂, ..., qₙ, superposition gives the field at a point P as the vector sum E = E₁ + E₂ + ... + Eₙ, each term being the point-charge field of one charge at P.
Why the field is more than a convenience
In electrostatics we could get every force straight from Coulomb's law, so the field looks like a handy middle step. Its real importance appears when charges accelerate. No signal travels faster than light, so if a charge is suddenly moved, a distant charge cannot feel the change instantly. The field picture handles this naturally: the disturbance travels outward through the field as an electromagnetic wave at speed c, carrying energy. Fields are therefore treated as physical things in their own right. The idea was introduced by Faraday.
Worked example 1: field and force
Find the field 30 cm from a +2 μC charge, and the force on a −0.5 μC charge placed there. E = kQ/r² = 9 × 10⁹ × 2 × 10⁻⁶ ÷ (0.3)² = 1.8 × 10⁴ ÷ 0.09 = 2 × 10⁵ N C⁻¹, pointing away from the +2 μC charge. Force F = qE = 0.5 × 10⁻⁶ × 2 × 10⁵ = 0.1 N; since the test charge is negative, the force points opposite to E, that is, towards the source (attraction, as expected).
Worked example 2: field midway between two charges
Charges +5 nC and −5 nC are 20 cm apart. At the midpoint each is 0.10 m away. Each field has magnitude 9 × 10⁹ × 5 × 10⁻⁹ ÷ (0.10)² = 45 ÷ 0.01 = 4.5 × 10³ N C⁻¹. The field of the positive charge points away from it, towards the negative charge; the field of the negative charge points towards itself - the same direction. So they add: E = 9.0 × 10³ N C⁻¹, directed towards the negative charge. (For two equal like charges the midpoint field would be zero.)
Worked example 3: an electron in a uniform field
An electron starts from rest in a uniform field of 1.0 × 10³ N C⁻¹. Its acceleration is a = eE/mₑ = (1.6 × 10⁻¹⁹ × 1.0 × 10³) ÷ 9.1 × 10⁻³¹ ≈ 1.76 × 10¹⁴ m s⁻², opposite to E. The time to cover 1.0 cm is t = √(2s/a) = √(0.02 ÷ 1.76 × 10¹⁴) ≈ 1.07 × 10⁻⁸ s. This acceleration is about 10¹³ times g = 9.8 m s⁻², so gravity can be ignored. Note too that a = qE/m depends on mass: in the same field a proton accelerates about 1840 times less than an electron, unlike free fall, where all bodies fall together.
Electric field lines
Faraday pictured fields with field lines. A field line is a curve drawn so that the tangent at every point gives the direction of the net field there, with an arrow showing which way. The closeness of the lines shows the field's strength: crowded where the field is strong, spread out where it is weak. For a point charge the same number of lines passes through every sphere around it while the sphere's area grows as r², so line density falls as 1/r² - exactly like the field. The number of lines drawn is a matter of choice; only their relative density matters.
- Field lines start on positive charges and end on negative charges; with a single charge they may begin or end at infinity.
- In a region with no charge they are continuous curves with no breaks.
- Two field lines never cross - at a crossing the field would have two directions at one point.
- Electrostatic field lines never form closed loops, because the electrostatic field is conservative (Chapter 2).
- In a uniform field they are parallel, equally spaced straight lines.
Common field-line patterns
-
Single positive charge
- Straight lines radiating outward in all directions
-
Single negative charge
- Straight lines pointing radially inward
-
Two equal positive charges
- Lines bend away from each other
- A neutral point midway with no field
- Shows mutual repulsion
-
Dipole (+q and −q)
- Lines run from +q and curve round into −q
- Shows mutual attraction
-
Uniform field
- Parallel, equally spaced straight lines
Electric flux
Think of water flowing through a ring: how much passes depends on the flow speed, the ring's area and how the ring is tilted. Electric flux measures, in the same way, how much field 'passes through' a surface (though nothing actually flows). A small flat area is treated as a vector ΔS of size ΔS pointing along its normal; for a closed surface the normal is always taken outward. Then:
Δφ = E · ΔS = E ΔS cos θ, where θ is the angle between E and the normal to the area. SI unit: N m² C⁻¹ (equivalently V m).
Δφ is proportional to the number of field lines crossing the area. It is largest when the surface faces the field squarely (θ = 0), zero when the field skims along the surface (θ = 90°), and negative when the field enters a closed surface (θ > 90°). For a larger surface we add up the flux through many small pieces, φ ≈ Σ E · ΔS.
Worked example 4: flux through a tilted square
A uniform field E = 2 × 10³ N C⁻¹ points along the x-axis. A square of side 10 cm (area 0.01 m²) is placed (a) with its normal along x, (b) with its normal at 60° to x, (c) with its plane containing the x-axis. (a) φ = EA = 2 × 10³ × 0.01 = 20 N m² C⁻¹. (b) φ = EA cos 60° = 20 × 0.5 = 10 N m² C⁻¹. (c) Normal at 90° to E, so φ = 0.
Key takeaways
- E = F/q (N C⁻¹); for a point charge E = Q/(4πε₀r²), radial; fields of several charges add as vectors.
- A charge in a uniform field has constant acceleration qE/m, so lighter particles accelerate more.
- Field lines: tangent gives direction, density gives strength; they start on +, end on −, never cross and never close.
- Flux Δφ = E ΔS cos θ, with the outward normal for a closed surface.
Check your understanding
-
1. A charge of 2 μC placed at a point feels a force of 6 × 10⁻³ N. What is the electric field at that point?
- 1.2 × 10⁻⁸ N C⁻¹
- 3 × 10³ N C⁻¹
- 3 × 10⁻³ N C⁻¹
- 3 × 10⁻⁹ N C⁻¹
Show answer
Answer: B. E = F/q = 6 × 10⁻³ ÷ 2 × 10⁻⁶ = 3 × 10³ N C⁻¹.
-
2. The electric field at distance r from a point charge is E. What is it at distance 2r?
- E/4
- E/2
- 2E
- 4E
Show answer
Answer: A. E ∝ 1/r², so doubling r divides E by 2² = 4, giving E/4.
-
3. Why can two electric field lines never cross each other?
- Because field lines carry charge and would repel
- Because field lines must always be straight
- Because the field would have two different directions at the crossing point
- Because field lines always form closed loops
Show answer
Answer: C. The tangent to a field line gives the direction of the net field. At a crossing there would be two tangents, meaning two directions for one field at one point, which is impossible.
-
4. A uniform field of 500 N C⁻¹ makes an angle of 60° with the normal to a flat surface of area 0.2 m². The flux through the surface is
- 100 N m² C⁻¹
- 87 N m² C⁻¹
- 25 N m² C⁻¹
- 50 N m² C⁻¹
Show answer
Answer: D. φ = E A cos θ = 500 × 0.2 × cos 60° = 100 × 0.5 = 50 N m² C⁻¹.
-
5. Assertion (A): In the same uniform electric field, an electron gains speed much faster than a proton. Reason (R): Both feel forces of equal magnitude eE, but the electron's mass is much smaller.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. The charges have equal magnitude e, so both feel force eE. Acceleration a = eE/m, and the electron's mass is about 1/1840 of the proton's, so it accelerates far more. R correctly explains A.
Sign in to keep track of the lessons you finish.