Revision notes

Chapter 1 Electric Charges and Fields: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Electric charge: kinds, conductors and basic properties

Charging a glass rod by rubbing it with silk

  1. Both neutral Glass and silk each have equal amounts of positive and negative charge.
  2. Rubbing Close contact lets some loosely held electrons move from the glass to the silk.
  3. Glass positive The rod has lost electrons, so it has a deficit of negative charge.
  4. Silk negative The cloth has gained exactly the electrons the rod lost.
The three basic properties of charge
PropertyWhat it saysExample
AdditivityTotal charge of a system is the algebraic sum of the individual charges. Charge is a scalar, but unlike mass it can be negative.+2 μC, −5 μC and +1 μC together make −2 μC.
ConservationThe total charge of an isolated system never changes. Charge can be transferred or redistributed, but not created or destroyed on the whole.When a neutron changes into a proton and an electron, the total charge stays zero.
QuantisationEvery free charge is a whole-number multiple of the basic charge e: q = ne, where n is an integer (positive, negative or zero).A body can carry 3e or −7e, never 2.5e.

q = ne, with e = 1.6 × 10⁻¹⁹ C and n = 0, ±1, ±2, ... An electron carries −e and a proton +e.

  • There are two kinds of charge; like charges repel and unlike charges attract.
  • Charging by rubbing transfers electrons; the body that loses electrons becomes positive.
  • Conductors let charge move freely; insulators keep it in place.
  • Charge is additive (a signed scalar), conserved in an isolated system, and quantised as q = ne.
Read the full lesson

Lesson 2

Coulomb's law and the superposition principle

F = k |q₁ q₂| / r², with k = 1/(4πε₀) ≈ 9 × 10⁹ N m² C⁻² and ε₀ = 8.854 × 10⁻¹² C² N⁻¹ m⁻² (permittivity of free space).

F₂₁ = (1/4πε₀) (q₁ q₂ / r₂₁²) r̂₂₁

Coulomb force and gravitational force

  • Coulomb force
    • Acts between charges
    • F = k|q₁q₂|/r²
    • Attractive or repulsive
    • Extremely strong (k ≈ 9 × 10⁹ N m² C⁻²)
    • Can cancel because charges have two signs
  • Gravitational force
    • Acts between masses
    • F = G m₁m₂/r²
    • Always attractive
    • Very weak (G ≈ 6.67 × 10⁻¹¹ N m² kg⁻²)
    • Never cancels, so it dominates at large scales
Both obey an inverse-square law along the line joining the two bodies.

F₁ = F₁₂ + F₁₃ + ... + F₁ₙ, where each term is given by Coulomb's law for that pair alone. This is the principle of superposition.

Finding the net force on one charge

  1. List the other charges Note each one's sign, size and distance from the charge you care about.
  2. Magnitudes Use F = k|q₁qᵢ|/r² for each pair separately.
  3. Directions Repulsion points away from the other charge, attraction towards it.
  4. Add as vectors Resolve into components or use the parallelogram law, then combine.
  • F = k|q₁q₂|/r² along the line joining two point charges; k = 1/4πε₀ ≈ 9 × 10⁹ N m² C⁻².
  • The vector form handles attraction and repulsion automatically and satisfies Newton's third law.
  • The electric force between elementary particles is about 10³⁶ to 10³⁹ times their gravitational attraction.
  • Net force on a charge = vector sum of the individual Coulomb forces (superposition).
Read the full lesson

Lesson 3

Electric field, field lines and electric flux

E = lim (q → 0) F/q. SI unit: N C⁻¹ (equivalently V m⁻¹). A charge q placed in a field E feels F = qE.

E = (1/4πε₀) Q/r², directed radially outward for positive Q and radially inward for negative Q.

Common field-line patterns

  • Single positive charge
    • Straight lines radiating outward in all directions
  • Single negative charge
    • Straight lines pointing radially inward
  • Two equal positive charges
    • Lines bend away from each other
    • A neutral point midway with no field
    • Shows mutual repulsion
  • Dipole (+q and −q)
    • Lines run from +q and curve round into −q
    • Shows mutual attraction
  • Uniform field
    • Parallel, equally spaced straight lines

Δφ = E · ΔS = E ΔS cos θ, where θ is the angle between E and the normal to the area. SI unit: N m² C⁻¹ (equivalently V m).

  • E = F/q (N C⁻¹); for a point charge E = Q/(4πε₀r²), radial; fields of several charges add as vectors.
  • A charge in a uniform field has constant acceleration qE/m, so lighter particles accelerate more.
  • Field lines: tangent gives direction, density gives strength; they start on +, end on −, never cross and never close.
  • Flux Δφ = E ΔS cos θ, with the outward normal for a closed surface.
Read the full lesson

Lesson 4

Electric dipole and continuous charge distributions

p = q × 2a, a vector directed along the axis from −q to +q. SI unit: C m.

Dipole fields at a distance r from the centre
PointExact fieldFar field (r ≫ a)Direction
On the axis2pr/[4πε₀(r² − a²)²]2p/(4πε₀r³)Along p
On the equatorial planep/[4πε₀(r² + a²)^(3/2)]p/(4πε₀r³)Opposite to p

τ = p × E, |τ| = pE sin θ. Net force in a uniform field = 0. The torque turns p towards E; it vanishes at θ = 0 and is greatest at θ = 90°.

A dipole in uniform and non-uniform fields

  • Uniform field
    • Forces qE and −qE cancel
    • Net force zero
    • Torque pE sin θ aligns p with E
    • No net translation
  • Non-uniform field
    • Forces on +q and −q differ in size
    • Net force not zero
    • p along E: pulled towards stronger field
    • Explains a charged comb attracting paper
Charge densities
DensityDefinitionSI unitUsed for
Linear, λλ = ΔQ/ΔlC m⁻¹Charged wires and rods
Surface, σσ = ΔQ/ΔSC m⁻²Charged sheets and conductor surfaces
Volume, ρρ = ΔQ/ΔVC m⁻³Charge spread through a volume
  • Dipole moment p = q × 2a, from −q to +q, unit C m.
  • Far fields: axial 2p/(4πε₀r³) along p; equatorial p/(4πε₀r³) opposite to p; both ∝ 1/r³.
  • Uniform field: zero net force, torque τ = p × E. Non-uniform field: net force as well.
  • λ, σ and ρ describe smooth charge distributions in C m⁻¹, C m⁻² and C m⁻³.
Read the full lesson

Lesson 5

Gauss's law and its applications

The total electric flux through any closed surface equals 1/ε₀ times the net charge enclosed by it: φ = ∮ E · dS = q_enclosed / ε₀.

Using Gauss's law to find a field

  1. Spot the symmetry Line (cylindrical), plane, or sphere.
  2. Guess the field's direction Symmetry fixes it: radial from a line or sphere, normal to a plane.
  3. Choose a Gaussian surface Make E either perpendicular to the surface with constant size, or parallel to it.
  4. Compute flux and enclosed charge Flux is E × (area where E is normal); charge from λ, σ or q.
  5. Equate and solve Set flux = q_enclosed/ε₀ and solve for E.

E = λ/(2πε₀r) = 2kλ/r, radially outward for λ > 0 and inward for λ < 0.

E = σ/(2ε₀), directed away from the sheet if σ > 0 (towards it if σ < 0), and independent of the distance from the sheet.

Results from Gauss's law

  • Infinite line charge
    • E = λ/(2πε₀r)
    • Varies as 1/r
    • Cylindrical Gaussian surface
  • Infinite plane sheet
    • E = σ/(2ε₀)
    • Independent of distance
    • Pillbox or box Gaussian surface
  • Thin spherical shell
    • Outside: q/(4πε₀r²), as if at centre
    • Inside: zero
    • Spherical Gaussian surface
  • Gauss's law: total outward flux through any closed surface = q_enclosed/ε₀.
  • It is most useful when symmetry lets you pick a surface on which E is constant and normal.
  • Line: λ/(2πε₀r). Sheet: σ/(2ε₀). Shell: q/(4πε₀r²) outside, zero inside.
Read the full lesson

Privacy · Terms · Refunds · Delivery