• Foundation
  • About 12 min
  • 5 practice questions

Design and build a boat

Use what you know about floating and balance to design, build, test and improve your own boat from everyday materials.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Choose materials that float for a boat.
  • Test a boat for floating, balance and strength.
  • Suggest ways to improve a design.

Now you are a boat designer! You know that shape and materials matter. You also know that balance matters. Let us put it all together.

Materials you can use

  • Paper or old newspaper (for a quick paper boat)
  • Ice-cream sticks joined with tape or glue
  • A coconut shell half or walnut shell halves
  • Clay shaped like a bowl
  • Thermocol pieces, bottle caps, string and tape

The design cycle

How designers work

  1. Think of an idea and draw it
  2. Build the boat
  3. Test it in water
  4. Find strengths and problems
  5. Improve the design

Then back to step 1: Think of an idea and draw it

Why do some boats flip?

A boat flips when it is heavier on one side. It is just like the off-centre spinner! Put any load in the middle of the boat. A wide, flat bottom helps a boat stay steady. If one side dips, move some weight to the other side.

Example notes from one paper boat
Strengths of my boatChallenges of my boat
Floats wellGets soggy after a while
Wide and steadyTips if loaded on one side

Let us try: Fix a leaning boat

Meera's boat leans towards side A. Step 1: Side A is heavier. Step 2: She moves a small pebble from side A towards side B. Step 3: The boat sits level. Balancing weight fixes the lean.

Let us try: Paper or sticks?

Dhruv's paper boat goes soggy and sinks after ten minutes. Step 1: Paper soaks up water. Step 2: Ice-cream sticks do not soak up much water. Step 3: He builds a stick raft. It floats much longer.

A good boat is made of materials that float, has a wide base, and carries its load in the middle.

Try at home with a grown-up: a boat challenge

  1. Choose two or three materials from the list.
  2. Draw your boat design first.
  3. Build it with help from a grown-up.
  4. Float it in a tub of water. Add coins one by one in the middle. How many can it carry?
  5. Write one strength and one problem, then try to improve it.

Use tape or glue sticks, not sharp tools. Stay near a grown-up around water.

For the grown-up: Let your child test and fail and try again. Ask "What will you change next time?" rather than fixing it for them.

Key takeaways

  • Boats can be made from paper, sticks, shells, clay and other floating materials.
  • Designers draw, build, test and improve.
  • A boat flips when one side is heavier; keep the load in the middle.
  • A wide, flat base makes a boat steadier.

Check your understanding

  1. 1. Why might a paper boat sink after a while?

    1. Paper is made of iron
    2. Paper is too light
    3. Paper soaks up water and gets soggy
    4. Water pushes it up
    Show answer

    Answer: C. Paper slowly soaks up water, gets heavy and loses its shape.

  2. 2. Where should you place a load in a boat?

    1. In the middle
    2. All on one edge
    3. Hanging off the front
    4. Only at the back corner
    Show answer

    Answer: A. A load in the middle keeps the weight even, so the boat does not tip.

  3. 3. A boat leans to one side. What should you do?

    1. Add more weight to the leaning side
    2. Make a hole in it
    3. Shake the water
    4. Move some weight to the other side
    Show answer

    Answer: D. Moving weight evens out the two sides, so the boat sits level.

  4. 4. Which step comes right after testing a boat?

    1. Throw it away
    2. Find its strengths and problems
    3. Draw a new idea without looking
    4. Stop for good
    Show answer

    Answer: B. After testing, we note what worked and what did not, then improve the design.

  5. 5. Which shape helps a boat stay steady?

    1. A wide, flat bottom
    2. A pointed bottom
    3. A ball shape
    4. A very tall, thin body
    Show answer

    Answer: A. A wide, flat base spreads the weight and stops the boat from rolling over.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: How Things Work

Privacy · Terms · Refunds · Delivery