• Foundation
  • About 15 min
  • 5 practice questions

Drawing bar graphs and using frequency tables

Draw an accurate bar graph by choosing a scale and working out bar lengths, and read frequency distribution tables correctly, including finding a total from them.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Choose a suitable scale from the smallest and largest values.
  • Calculate bar lengths and draw a neat, labelled bar graph.
  • Read a frequency distribution table and find the total it describes.

Reading graphs is half the skill; the other half is making them. A good bar graph fits the page, is easy to read and shows the numbers accurately. The most important choice is the scale.

Steps to draw a bar graph

Drawing a bar graph

  1. Draw two axes A horizontal line and a vertical line meeting at a right angle.
  2. Mark the categories Space them equally along one axis.
  3. Choose a scale Look at the largest value and pick a unit value so the tallest bar fits.
  4. Mark the value axis Start at 0 and go up in equal steps of the scale.
  5. Work out bar lengths Value ÷ scale = length in units.
  6. Draw and label Bars of equal width with equal gaps; add a title and axis labels.

Worked example 1: a family's monthly spending

A family spends: Rent ₹4,000, Food ₹5,000, Education ₹1,500, Electricity ₹500, Travel ₹1,000. The largest value is ₹5,000. A scale of 1 unit = ₹1 would need 5,000 units, which is impossible. Try 1 unit = ₹500: the tallest bar is 5,000 ÷ 500 = 10 units, which fits nicely.

Bar lengths with scale 1 unit = ₹500
ItemSpending (₹)WorkingBar length
Rent4,0004,000 ÷ 5008 units
Food5,0005,000 ÷ 50010 units
Education1,5001,500 ÷ 5003 units
Electricity500500 ÷ 5001 unit
Travel1,0001,000 ÷ 5002 units

From the graph we can see that food costs the most, then rent. Electricity (₹500) is one third of education (₹1,500), since 1,500 ÷ 500 = 3. Total spending = 4,000 + 5,000 + 1,500 + 500 + 1,000 = ₹12,000.

Choosing a good scale

  • Find the largest value and decide how many units tall the longest bar should be (about 8 to 15 units suits a notebook page).
  • Pick a 'friendly' unit value such as 1, 2, 5, 10, 20, 50, 100 or 500, so that most bars come out in whole or half units.
  • Always start the value axis at 0 and keep the steps equal.

Worked example 2: finding a missing scale

On a damaged graph of train tickets sold, the bar for Station A is 6 units and shows 24 tickets, and the bar for Station B is 5 units and shows 20 tickets. Scale: 24 ÷ 6 = 4 and 20 ÷ 5 = 4, so 1 unit = 4 tickets. A station that sold 16 tickets should have a bar of 16 ÷ 4 = 4 units; one that sold 28 tickets needs 28 ÷ 4 = 7 units.

Frequency distribution tables

Sometimes the categories are themselves numbers. A school cricket team recorded how many sixes it hit in each of its matches. A frequency distribution table pairs each value (number of sixes) with its frequency (how many matches had that value).

Sixes hit per match
Sixes in a matchNumber of matches
03
15
24
32

Worked example 3: the total from a frequency table

How many matches were played? 3 + 5 + 4 + 2 = 14. How many sixes were hit in all? Adding 0 + 1 + 2 + 3 = 6 is wrong, because each value happened several times. Multiply each value by its frequency: 0 × 3 = 0, 1 × 5 = 5, 2 × 4 = 8, 3 × 2 = 6. Total = 0 + 5 + 8 + 6 = 19 sixes.

Bar length = value ÷ scale. In a frequency table of numerical values, total = sum of (value × frequency).

Key takeaways: draw two axes, space the categories equally, choose a friendly scale from the largest value, start at 0, and calculate each bar length as value ÷ scale. For a frequency table of numbers, the number of cases is the sum of the frequencies, and the grand total is the sum of value × frequency.

Check your understanding

  1. 1. The largest value to be shown is 90, and you want the tallest bar to be about 9 units. Which scale is best?

    1. 1 unit = 1
    2. 1 unit = 10
    3. 1 unit = 9
    4. 1 unit = 50
    Show answer

    Answer: B. With 1 unit = 10, the tallest bar is 90 ÷ 10 = 9 units. 1 unit = 1 needs 90 units, 9 gives awkward values, and 50 makes the bars too short.

  2. 2. With the scale 1 unit = ₹200, how long should the bar for ₹3,400 be?

    1. 17 units
    2. 34 units
    3. 15 units
    4. 20 units
    Show answer

    Answer: A. Bar length = 3,400 ÷ 200 = 17 units.

  3. 3. On a bar graph, a 7-unit bar stands for 35 kg. What value does a 4-unit bar on the same graph stand for?

    1. 28 kg
    2. 11 kg
    3. 20 kg
    4. 4 kg
    Show answer

    Answer: C. The scale is 35 ÷ 7 = 5 kg per unit, so a 4-unit bar stands for 4 × 5 = 20 kg.

  4. 4. A table shows wickets taken in matches: 0 wickets in 2 matches, 1 wicket in 4 matches, 2 wickets in 3 matches, 3 wickets in 1 match. How many wickets were taken in total?

    1. 6
    2. 10
    3. 8
    4. 13
    Show answer

    Answer: D. Multiply each value by its frequency: 0 × 2 + 1 × 4 + 2 × 3 + 3 × 1 = 0 + 4 + 6 + 3 = 13 wickets. (10 is the number of matches, and 6 is just 0 + 1 + 2 + 3.)

  5. 5. Which of these is a mistake when drawing a bar graph?

    1. Starting the value axis at 0
    2. Drawing bars of different widths
    3. Keeping equal gaps between bars
    4. Writing a title
    Show answer

    Answer: B. Bars must all have the same width so that only their lengths show the values. The other three are correct practice.

Privacy · Terms · Refunds · Delivery