- Foundation
- About 14 min
- 5 practice questions
Measuring length correctly, including curved lines
Choose the right measuring tool, place the scale and your eye correctly, measure with a broken scale by subtracting readings, and measure curved lines with a thread or tape.
If something looks wrong, please tell us.
By the end of this lesson you can
- Choose a suitable measuring tool and place the scale correctly along the object.
- Read a scale with your eye directly above the mark, and use a scale with a broken end.
- Measure the length of a curved line using a thread or a flexible tape.
Even with a standard scale, two people can get different answers if they measure carelessly. A few simple habits make measurements accurate and trustworthy.
Choose the right tool
| Tool | Good for |
|---|---|
| 15-cm or 30-cm scale | Pencils, erasers, notebooks |
| Metre scale or metre rod | Tables, doors, cloth in a shop |
| Long measuring tape | Rooms, playgrounds, sports courts |
| Flexible tailor's tape | Curved things: waist, a tree trunk's girth, a bottle's base |
Three rules for reading a scale
- Place the scale along the object, touching it, not tilted away or at an angle.
- Line up one end of the object with a clear mark, usually zero.
- Keep your eye directly above the mark you are reading. Looking from the side makes the reading seem too large or too small.
Scale touching the object and along its length, one end on a clear mark, and your eye directly above the reading.
Worked example 1: a scale with a broken end
Tanya's scale is broken at the start, so the zero is missing. She lines up one end of her eraser with the 2.0 cm mark. The other end reaches 6.7 cm. Step 1: length = reading at the far end − reading at the starting mark. Step 2: 6.7 cm − 2.0 cm = 4.7 cm. Check: counting from 2.0 cm, 4 whole centimetres reach 6.0 cm, and 7 more millimetres reach 6.7 cm, so 4.7 cm. A broken scale works perfectly if you start from any clear mark and subtract.
Measuring with a broken scale
- Pick a clear full mark For example 1.0 cm or 2.0 cm.
- Line up one end Put one end of the object exactly on that mark.
- Read the other end Eye directly above the mark.
- Subtract Length = end reading − starting mark.
Measuring a curved line
A straight scale cannot follow a curve. Instead, lay a thread carefully along the whole curve, holding it in place bit by bit, and mark or pinch the thread where the curve ends. Then straighten the thread along a metre scale and read its length. A flexible measuring tape does the same job directly. The thread must not stretch; a stretchy rubber band would give a wrong answer.
Worked example 2: lights for an arch
Farhan wants to hang a string of lights along a curved arch above a doorway. Step 1: he lays a thread along the arch from one side to the other. Step 2: he straightens the thread on a measuring tape: it measures 2 m 35 cm. Step 3, convert: 2 m 35 cm = 200 cm + 35 cm = 235 cm = 2.35 m. Step 4: he needs two such arches, so 2 × 2.35 m = 4.70 m of lights. He buys a 5 m string, a little extra to reach the plug.
Visually challenged students measure using scales with raised markings that they can feel. Whatever the tool, always write the unit with the number, and compare with friends: small differences can come from how carefully each person placed the scale and read it.
Key takeaways: choose a tool to match the object: scales for short straight lengths, tapes for long or curved ones. Place the scale along and touching the object, start at a clear mark and keep your eye directly above the reading. With a broken scale, subtract the starting mark from the end reading. Measure curves with a non-stretchy thread or a flexible tape.
Check your understanding
-
1. Where should your eye be when you read a scale?
- Directly above the mark being read
- Far to the left of the mark
- Far to the right of the mark
- Below the table
Show answer
Answer: A. Reading from the side makes the value appear larger or smaller. The eye must be directly above the mark.
-
2. One end of a pencil is at the 1.0 cm mark of a broken scale and the other end is at 13.4 cm. How long is the pencil?
- 13.4 cm
- 14.4 cm
- 12.4 cm
- 1.0 cm
Show answer
Answer: C. Length = end reading − starting mark = 13.4 cm − 1.0 cm = 12.4 cm.
-
3. Which tool is best for measuring the girth (distance around) of a tree trunk?
- A 15-cm scale
- A wooden metre rod
- A ruler from a geometry box
- A flexible measuring tape
Show answer
Answer: D. Going round a curved trunk needs something that bends, such as a flexible tape or a thread.
-
4. Why should a thread used to measure a curve not be stretchy?
- A stretchy thread changes length, giving a wrong reading
- Stretchy threads are too short
- Stretchy threads cannot be straightened
- Stretchy threads are always coloured
Show answer
Answer: A. If the thread stretches while laid along the curve and then shrinks when straightened, the measured length will be wrong.
-
5. A curved border is measured with a thread that then measures 1 m 60 cm on a tape. How many centimetres is this?
- 16 cm
- 1060 cm
- 116 cm
- 160 cm
Show answer
Answer: D. 1 m = 100 cm, so 1 m 60 cm = 100 cm + 60 cm = 160 cm.
Sign in to keep track of the lessons you finish.