Revision notes

Chapter 5 Measurement of Length and Motion: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

How do we measure? Body units and the need for a standard

The same desk measured in handspans (an example class record)
StudentHandspans counted
Gopal8
LataJust over 8
Imran9
SnehaBetween 9 and 10

Every measurement = a number + a unit. For example, in '8 handspans', 8 is the number and the handspan is the unit.

Body units and standard units

  • Body units
    • Handspan, foot, stride, angula
    • Always available
    • Differ from person to person
    • Results cannot be compared fairly
  • Standard units
    • Metre, centimetre, kilometre
    • Need a scale or tape
    • Same for everyone, everywhere
    • Results can be compared and trusted

Key takeaways: people have long measured with body units like the handspan, stride and angula. Body units differ from person to person, so the same length gives different numbers. A measurement always has a number and a unit. To compare measurements fairly, everyone must use the same, standard unit.

Read the full lesson

Lesson 2

Standard units: the metre, centimetre, millimetre and kilometre

1 km = 1000 m; 1 m = 100 cm; 1 cm = 10 mm (so 1 mm = 0.1 cm and 1 m = 1000 mm).

Going from a bigger unit to a smaller one

  1. kilometre (km) × 1000 to get metres
  2. metre (m) × 100 to get centimetres
  3. centimetre (cm) × 10 to get millimetres
  4. millimetre (mm) The smallest mark on a school scale
To go to a smaller unit, multiply. To go back to a bigger unit, divide by the same number.
Which unit suits which length?
Length to measureSuitable unitWhy
Distance between two citieskmVery long; metres would give huge numbers
Length of a classroom or a playgroundmMedium lengths
Length of a pencil or a bookcmShort lengths
Thickness of a coin or a pencil leadmmVery small lengths

Key takeaways: the SI unit of length is the metre (m). 1 km = 1000 m, 1 m = 100 cm and 1 cm = 10 mm. Multiply when changing to a smaller unit and divide when changing to a bigger one. Choose a unit that suits the size of the length, convert to one unit before comparing, and write symbols in small letters with a space, no 's' and no full stop.

Read the full lesson

Lesson 3

Measuring length correctly, including curved lines

Tools for measuring length
ToolGood for
15-cm or 30-cm scalePencils, erasers, notebooks
Metre scale or metre rodTables, doors, cloth in a shop
Long measuring tapeRooms, playgrounds, sports courts
Flexible tailor's tapeCurved things: waist, a tree trunk's girth, a bottle's base

Scale touching the object and along its length, one end on a clear mark, and your eye directly above the reading.

Measuring with a broken scale

  1. Pick a clear full mark For example 1.0 cm or 2.0 cm.
  2. Line up one end Put one end of the object exactly on that mark.
  3. Read the other end Eye directly above the mark.
  4. Subtract Length = end reading − starting mark.

Key takeaways: choose a tool to match the object: scales for short straight lengths, tapes for long or curved ones. Place the scale along and touching the object, start at a clear mark and keep your eye directly above the reading. With a broken scale, subtract the starting mark from the end reading. Measure curves with a non-stretchy thread or a flexible tape.

Read the full lesson

Lesson 4

Position, reference points, motion and rest

A reference point is a fixed object or point with respect to which the position or distance of other objects is stated.

An object is in motion if its position changes with respect to a reference point with time. It is at rest if its position does not change with respect to the reference point with time.

Moving or at rest? (reference point: the ground)
ObjectIn motion or at rest?Reason
A cow walking across a fieldIn motionIts position changes with time
A tree in the school yardAt restIts position stays the same
A ball rolling down a slopeIn motionIts position changes with time
A parked scooterAt restIts position stays the same

A passenger in a moving bus

  • Reference point: the bus
    • Passenger stays in the same seat
    • Position does not change with time
    • Passenger is at rest
  • Reference point: a building outside
    • Passenger moves further from the building
    • Position changes with time
    • Passenger is in motion

Key takeaways: positions and distances are stated from a reference point. An object is in motion if its position changes with time with respect to the reference point, and at rest if it does not. The same object can be at rest for one reference point and in motion for another, so always say which reference point you are using.

Read the full lesson

Lesson 5

Types of motion: linear, circular and oscillatory

Types of motion

  • Linear
    • Straight-line path
    • Falling stone, marching students
  • Circular
    • Circular path
    • Fan blade tip, merry-go-round
  • Oscillatory
    • To and fro about a fixed position
    • Swing, clock pendulum

Linear: along a straight line. Circular: along a circular path. Oscillatory: to and fro about a fixed position.

Motions in a children's park
ObjectType of motionReason
Child going down a straight slideLinearMoves along a straight line
Child on a merry-go-roundCircularMoves along a circular path
Child on a swingOscillatoryMoves to and fro about the lowest point
Seesaw endOscillatoryMoves up and down about a fixed middle
Jogger on a straight pathLinearMoves along a straight line

Key takeaways: linear motion is along a straight line, circular motion is along a circular path and oscillatory motion is to and fro about a fixed position. Motion that repeats after a fixed interval is periodic; circular and oscillatory motion usually are. Parts of one object, such as a bicycle, can show different types of motion at once.

Read the full lesson

Privacy · Terms · Refunds · Delivery