• Foundation
  • About 13 min
  • 5 practice questions

Properties of materials: lustre and hardness

Group materials as lustrous or non-lustrous and as hard or soft, explain why metals can look dull, and test hardness by pressing and scratching.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Sort materials into lustrous and non-lustrous.
  • Explain why some metals look dull and why not every shiny thing is a metal.
  • Compare hardness by pressing and scratching, and explain why hardness is relative.

Hold a new steel spoon, a piece of cardboard and a chalk stick under a bright light. They look and feel quite different. Appearance and hardness are two properties that help us sort materials.

Lustre: shiny or dull

Materials that have a shiny surface are said to have lustre; they are lustrous. Metals such as iron, copper, aluminium, zinc and gold are usually lustrous. Materials without a shiny surface, such as paper, wood, rubber, jute and chalk, are non-lustrous.

Metals can lose their shine over time because air and moisture act on their surface. An old iron gate looks dull and a copper vessel turns dull brown, but if you scratch or freshly cut the surface, the shine shows again. On the other hand, not every shiny thing is a metal: a polished wooden table, a waxed fruit or a plastic-coated book cover can shine because of a polish or coating on top.

Worked example 1: is it a metal?

Rani finds two shiny objects: a coin and a glossy magazine cover. Step 1: both shine, so shine alone cannot decide. Step 2: she gently scratches a hidden spot on each. Under the magazine's glossy coating there is dull paper. Under the coin's dull worn patches the scratch is bright and shiny. Step 3, conclude: the coin is a metal with real lustre; the magazine is paper with a shiny coating. As the saying goes, all that glitters is not gold.

Hard or soft

A material that is difficult to press (compress) or scratch is hard; one that can be pressed or scratched easily is soft. A stone is hard; a sponge and a pillow are soft. To compare, scratch different materials with the tip of a metal key: chalk and candle wax scratch very easily, wood scratches with some effort, and a stone or an iron nail hardly scratches at all.

Hardness is relative: we can only say a material is harder or softer than another. Rubber is harder than sponge but softer than iron.

Hard or soft? (expected results for these objects)
ObjectMaterialHard or soft
BrickBaked clayHard
PillowCotton and clothSoft
Steel tumblerSteelHard
SweaterWoolSoft
EraserRubberSoft compared with wood; harder than sponge

Worked example 2: ordering by hardness

Arrange from softest to hardest: wax, wood, iron, sponge. Step 1, press test: sponge squashes with a light press, so it is the softest. Step 2, scratch test: a fingernail marks wax easily; a key is needed to scratch wood; a key barely marks iron. Answer: sponge, wax, wood, iron. Each material is harder than the one before it and softer than the one after it, which is what 'relative' means.

Sorting by appearance and feel

  • Lustrous
    • Shiny surface
    • Most metals: iron, copper, aluminium
  • Non-lustrous
    • Dull surface
    • Paper, wood, rubber, jute
  • Hard
    • Hard to press or scratch
    • Stone, iron, brick
  • Soft
    • Easy to press or scratch
    • Sponge, cotton, wax

Key takeaways: lustrous materials, mostly metals, have a shiny surface; non-lustrous ones do not. Metals may go dull in air and moisture but shine when freshly cut, and some shiny things are only polished or coated. Hard materials are difficult to press or scratch, soft ones are easy, and hardness is always a comparison between materials.

Check your understanding

  1. 1. Which material is lustrous?

    1. Freshly cut copper
    2. Jute
    3. Cardboard
    4. Chalk
    Show answer

    Answer: A. Metals like copper are lustrous, especially on a freshly cut surface. Jute, cardboard and chalk are non-lustrous.

  2. 2. An old iron gate looks dull. What does a fresh scratch on it most likely show?

    1. Dull paper underneath
    2. That iron is not a metal
    3. A bright, shiny surface
    4. Wood underneath
    Show answer

    Answer: C. Air and moisture dull the surface of metals, but a freshly scratched or cut surface shows the metal's lustre.

  3. 3. A polished wooden table shines. What is the best explanation?

    1. Wood is a metal
    2. All wood is lustrous
    3. Polish makes everything magnetic
    4. A shiny polish coating covers the non-lustrous wood
    Show answer

    Answer: D. Wood is non-lustrous. The shine comes from a layer of polish on top, so not every shiny thing is a metal.

  4. 4. What does 'hardness is relative' mean?

    1. A material is called hard or soft only in comparison with other materials
    2. All materials are equally hard
    3. Hardness changes every day
    4. Only metals have hardness
    Show answer

    Answer: A. Rubber is harder than sponge but softer than iron, so we describe hardness by comparing materials.

  5. 5. Which order goes from softest to hardest?

    1. Iron, wood, wax, sponge
    2. Sponge, wax, wood, iron
    3. Wax, sponge, iron, wood
    4. Wood, iron, sponge, wax
    Show answer

    Answer: B. Sponge squashes most easily, wax scratches with a fingernail, wood needs a key, and iron barely scratches at all.

Privacy · Terms · Refunds · Delivery