• Foundation
  • About 15 min
  • 5 practice questions

The laboratory thermometer: range, smallest division and correct use

Describe a laboratory thermometer, find its range and the value of its smallest division, read it correctly, and explain why it is not used for body temperature.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the parts of a laboratory thermometer and find its range.
  • Calculate the value of the smallest division and read a temperature.
  • Follow the rules for measuring the temperature of a liquid correctly.

In the science laboratory you will often need the temperature of water or another liquid. The laboratory thermometer is made for this job, and learning to read it carefully is an important skill.

Parts of a laboratory thermometer

It is a long, narrow, sealed glass tube of even width. At one end is a bulb containing a liquid, usually alcohol coloured red so it is easy to see, or in older ones mercury. A thin column of the liquid rises up the tube when it gets warmer and falls when it gets cooler. A Celsius scale is marked along the tube. The temperature is the mark level with the top of the liquid column.

Range and smallest division

The range is from the lowest to the highest temperature marked; a common range is −10 °C to 110 °C. To find the smallest division, take two numbered marks, find the temperature difference between them and divide by the number of small divisions between them.

Value of one small division = (difference between two numbered marks) ÷ (number of small divisions between them).

Worked example 1: finding the smallest division

(a) Between 20 °C and 30 °C there are 10 small divisions. One division = (30 − 20) ÷ 10 = 10 ÷ 10 = 1 °C. (b) Another thermometer has 40 divisions between 0 °C and 100 °C. One division = 100 ÷ 40 = 2.5 °C. (c) A third has 20 divisions between 10 °C and 20 °C. One division = 10 ÷ 20 = 0.5 °C. Reading with (c): if the column ends 7 divisions above 10 °C, the temperature is 10 + 7 × 0.5 = 10 + 3.5 = 13.5 °C.

Measuring correctly

  1. Hold the thermometer upright (vertical), not tilted.
  2. Dip it so that the bulb is fully in the liquid, but the bulb must not touch the bottom or sides of the beaker.
  3. Wait until the column stops moving, then read it while the bulb is still in the liquid. If you lift it out, the reading starts to change at once.
  4. Keep your eye level with the top of the liquid column.
  5. Handle it gently, as glass breaks easily, and do not hold it by the bulb.

Taking a reading with a laboratory thermometer

  1. Check range and smallest division Before you start.
  2. Hold upright, bulb in liquid Not touching the bottom or sides.
  3. Wait for the column to stop But not so long that the liquid cools.
  4. Read at eye level While the bulb is still in the liquid.

Worked example 2: why do the readings differ?

Suppose five students in a hill town each read the temperature of the same boiling water and get 97.6 °C, 97.9 °C, 98.2 °C, 97.8 °C and 98.0 °C. Step 1, spread: highest − lowest = 98.2 − 97.6 = 0.6 °C, a small spread. Step 2, causes: some may have read from above or below eye level, tilted the thermometer, or let the bulb touch the hot bottom of the vessel. Step 3, why not 100 °C? At high places water boils a little below 100 °C. Boiling water work must be done only by or under the close supervision of the teacher. While water boils, its temperature stays steady; while ice melts, its temperature also stays steady.

Why not for body temperature? A laboratory thermometer's reading starts falling as soon as it leaves the mouth, its glass can break, and its range and markings are not designed for reading small changes around body temperature. Use a clinical thermometer for people.

Key takeaways: a laboratory thermometer has a bulb, a liquid column and a Celsius scale; a common range is −10 °C to 110 °C. One division = difference between numbered marks ÷ number of divisions. Hold it upright, keep the bulb in the liquid without touching the container, read at eye level while it is still immersed, and handle it with care.

Check your understanding

  1. 1. What is a common range of a laboratory thermometer?

    1. 35 °C to 42 °C
    2. −10 °C to 110 °C
    3. 0 °C to 37 °C
    4. 100 °C to 200 °C
    Show answer

    Answer: B. Laboratory thermometers commonly read from −10 °C to 110 °C. 35 °C to 42 °C is the range of a clinical thermometer.

  2. 2. A thermometer has 20 divisions between 0 °C and 100 °C. What does each division measure?

    1. 1 °C
    2. 2 °C
    3. 0.5 °C
    4. 5 °C
    Show answer

    Answer: D. One division = 100 ÷ 20 = 5 °C.

  3. 3. Each small division is 0.5 °C. The column ends 6 divisions above the 20 °C mark. What is the temperature?

    1. 23 °C
    2. 26 °C
    3. 20.6 °C
    4. 21.5 °C
    Show answer

    Answer: A. 6 × 0.5 = 3 °C above 20 °C, so the reading is 20 + 3 = 23 °C.

  4. 4. Why should the reading be taken while the bulb is still in the water?

    1. Because the glass may break outside
    2. Because the liquid column starts to change as soon as it is taken out
    3. Because it is easier to hold
    4. Because the scale disappears outside water
    Show answer

    Answer: B. Out of the water, the bulb is at a different temperature, so the column immediately starts moving and the reading becomes wrong.

  5. 5. Which is a correct way to use a laboratory thermometer in a beaker of water?

    1. Let the bulb rest on the bottom of the beaker
    2. Tilt it so it is easier to read
    3. Hold it upright with the bulb in the water, not touching the bottom or sides
    4. Hold it by the bulb
    Show answer

    Answer: C. The thermometer should be upright, with the bulb fully immersed but not touching the container, and held by the top, not the bulb.

Privacy · Terms · Refunds · Delivery