- Foundation
- About 14 min
- 5 practice questions
Constructing triangles from sides and angles
Construct a triangle from two sides and the angle between them, or from two angles and the side between them, and decide when two given angles cannot belong to a triangle.
If something looks wrong, please tell us.
By the end of this lesson you can
- Construct a triangle given two sides and the included angle.
- Construct a triangle given two angles and the included side.
- Explain, using parallel lines, why two angles adding to 180° or more cannot be angles of a triangle.
Three sides are not the only way to fix a triangle. Sometimes we know angles instead, for example from a map or a design. This lesson covers two more constructions and finds out when they are impossible.
Two sides and the included angle
The included angle is the angle between the two given sides, at the vertex where they meet.
Worked example 1: PQ = 6 cm, ∠P = 60°, PR = 4 cm
- Draw the base PQ = 6 cm.
- At P, use a protractor to draw a ray making 60° with PQ.
- On this ray mark R so that PR = 4 cm (use the ruler or a compass set to 4 cm).
- Join QR. ∆PQR is the required triangle.
This construction always works for any angle less than 180°: the third side is simply the segment joining the ends of the two given sides.
Two angles and the included side
Here the given side is the one shared by both given angles.
Worked example 2: XY = 6 cm, ∠X = 55°, ∠Y = 65°
- Draw the base XY = 6 cm.
- At X draw a ray making 55° with XY, on the upper side.
- At Y draw a ray making 65° with YX, on the same side.
- The rays meet at Z. ∆XYZ is the required triangle.
Two constructions with angles
-
Two sides + included angle
- Draw one side
- Draw the angle at one end
- Mark the second side along it
- Join the ends: always possible (angle < 180°)
-
Two angles + included side
- Draw the side
- Draw an angle at each end, on the same side
- The rays meet at the third vertex
- Possible only if the angles add to less than 180°
When do the rays never meet?
If both angles are 90° or more, the rays lean away from each other and never meet. More interesting: suppose ∠X = 50°. How large can ∠Y be? The ray from Y must not be parallel to, or lean away from, the ray from X. If the ray from Y is exactly parallel to the ray from X, then XY is a transversal of two parallel lines, and the interior angles on the same side add up to 180°: ∠Y = 180° − 50° = 130°. So for ∠X = 50°, a triangle exists only when ∠Y is less than 130°.
Two angles with an included side give a triangle exactly when the two angles add up to less than 180°. The length of the included side does not affect whether the triangle exists.
Worked example 3: possible or not?
| Angles given | Sum | Triangle? |
|---|---|---|
| 40° and 145° | 185° | no |
| 65° and 45° | 110° | yes |
| 95° and 80° | 175° | yes |
| 120° and 60° | 180° | no: the rays are parallel |
Changing the length of the included side changes the size of the triangle but not whether it exists, and, as you can check by constructing, it does not change the third angle either. That observation leads to the next lesson.
Key takeaways
Key takeaways: With two sides and the included angle, draw a side, the angle, then the second side, and join. With two angles and the included side, draw the side and both angles; the rays meet at the third vertex. That happens only when the two angles add up to less than 180°, because at exactly 180° the rays are parallel.
Check your understanding
-
1. To construct ∆ABC with AB = 5 cm, AC = 4 cm and ∠A = 45°, which steps are correct?
- Draw AC = 4 cm, then a 45° angle at C
- Draw arcs of 5 cm and 4 cm from one point
- Draw AB = 5 cm, then a 45° angle at B, and mark C 4 cm along it
- Draw AB = 5 cm, draw a 45° angle at A, and mark C 4 cm along that ray from A
Show answer
Answer: D. ∠A is the angle between AB and AC, so it is drawn at A. Then C is marked 4 cm from A along the new ray, and B and C are joined.
-
2. Which pair of angles, with an included side, can give a triangle?
- 95° and 90°
- 70° and 100°
- 120° and 60°
- 150° and 45°
Show answer
Answer: B. The angles must add to less than 180°. 70° + 100° = 170° works. The others give 185°, 180° and 195°.
-
3. In a construction, ∠A = 35° at one end of the base. What is the smallest ∠B at the other end for which the two rays never meet?
- 55°
- 135°
- 145°
- 180°
Show answer
Answer: C. The rays are parallel when the interior angles on the same side add to 180°: ∠B = 180° − 35° = 145°. At 145° or more, no triangle forms.
-
4. Two angles of 60° and 70° are drawn at the ends of a base. Does making the base longer affect whether a triangle forms?
- No: a triangle forms for any base length, because 60° + 70° is less than 180°
- Yes: a long base stops the rays meeting
- Yes: a short base stops the rays meeting
- Only if the base is more than 10 cm
Show answer
Answer: A. Whether the rays meet depends only on the angles adding to less than 180°. The base length changes the size of the triangle, not its existence.
-
5. Why is a triangle always possible when two sides and the included angle (less than 180°) are given?
- Because the two sides must be equal
- Because the third side is just the segment joining the free ends of the two given sides
- Because the angle is always 90°
- Because the triangle inequality is not needed
Show answer
Answer: B. After drawing the two sides at the given angle, their free ends are two points, and a segment can always join two points. That segment is the third side.
Sign in to keep track of the lessons you finish.