- Foundation
- About 14 min
- 5 practice questions
Dot plots: seeing spread and centre
Draw and read dot plots, describe how data is spread out or clustered, spot outliers, and compare two groups using range, mean and median.
If something looks wrong, please tell us.
By the end of this lesson you can
- Draw a dot plot from a list of data and read values from one.
- Describe spread, clusters and outliers using a dot plot.
- Compare two groups using their dot plots, ranges, means and medians.
A list of numbers is hard to take in at a glance. A simple picture called a dot plot sorts the data for us and shows at once where values bunch together, how far they spread and which ones stand alone.
What a dot plot is
Draw a number line covering the data. For each value, put a dot above its place on the line. If a value occurs again, stack the new dot above the earlier one. Space the numbers evenly along the line and the dots evenly up each stack.
Worked example 1: time to reach school
Twelve students recorded how many minutes they take to reach school: 5, 8, 10, 10, 12, 12, 12, 15, 15, 18, 20, 31. Below, each ● is one student.
| Minutes | 5 | 8 | 10 | 12 | 15 | 18 | 20 | 31 |
|---|---|---|---|---|---|---|---|---|
| Students | ● | ● | ●● | ●●● | ●● | ● | ● | ● |
- Spread: minimum 5, maximum 31, range = 31 − 5 = 26 minutes.
- Cluster: most dots bunch between 10 and 15 minutes; 12 is the tallest stack.
- Outlier: 31 sits far from the others; perhaps that student lives much farther away.
- Median: 12 values, so average the 6th and 7th: (12 + 12) ÷ 2 = 12 minutes.
- Mean: sum = 168, so mean = 168 ÷ 12 = 14 minutes. It is above the median because of the high outlier.
Drawing a dot plot
- Find the ends Note the minimum and maximum.
- Draw the line Mark evenly spaced numbers that cover the data.
- Place the dots One dot per value, stacking repeats.
- Mark centre Show the mean and median if needed.
- Describe Talk about spread, clusters and outliers.
What a dot plot shows and hides
A dot plot keeps every value and sorts them, so the lowest, highest, clusters and gaps are easy to see. But it loses the order in which the values were collected: from the dot plot alone you cannot tell which student is which, or which month a price belongs to.
Worked example 2: who estimates a minute better?
Two groups closed their eyes and opened them when they thought 1 minute (60 seconds) had passed. Seconds taken:
| Group | Values (seconds) | Range | Mean | Median |
|---|---|---|---|---|
| P | 45, 50, 52, 55, 58, 60, 60, 62, 65, 73 | 73 − 45 = 28 | 580 ÷ 10 = 58 | (58 + 60) ÷ 2 = 59 |
| Q | 54, 56, 57, 58, 59, 60, 61, 62, 63, 70 | 70 − 54 = 16 | 600 ÷ 10 = 60 | (59 + 60) ÷ 2 = 59.5 |
Working: both medians are close to 60. Group Q's mean is exactly 60 and its range (16) is much smaller than P's (28), so Q's dots crowd closer around 60. Group Q estimated a minute more accurately and more consistently. Group P's estimates were more spread out, from well under a minute to well over.
To compare groups, look at both the centre (mean, median) and the spread (range, clusters, outliers). Similar centres can hide very different spreads.
Key takeaways: a dot plot stacks one dot per value on a number line. It shows spread, clusters and outliers at a glance but loses the original order. Compare groups using centre and spread together.
Check your understanding
-
1. In the school-time data 5, 8, 10, 10, 12, 12, 12, 15, 15, 18, 20, 31, how many students take more than 15 minutes?
- 2
- 5
- 3
- 4
Show answer
Answer: C. Values above 15 are 18, 20 and 31: three students. The two values equal to 15 are not more than 15.
-
2. In a dot plot, what does the tallest stack of dots show?
- The value that occurs most often
- The mean
- The largest value
- The range
Show answer
Answer: A. Each dot is one occurrence, so the tallest stack is the value that occurs most often.
-
3. Which information does a dot plot of monthly prices NOT show?
- The highest price
- Which price belongs to which month
- How spread out the prices are
- Whether any price is an outlier
Show answer
Answer: B. A dot plot sorts values along the line, so the original order (which month) is lost. Highest value, spread and outliers are all visible.
-
4. Group P's estimates range from 45 to 73 seconds; Group Q's from 54 to 70 seconds. Both medians are about 59. What can you say?
- Group P is more consistent
- Both groups are equally consistent
- Group P's estimates were all longer
- Group Q is more consistent, because its range is smaller
Show answer
Answer: D. Group Q's range is 70 − 54 = 16 and Group P's is 73 − 45 = 28. With similar centres, the smaller spread means Q's estimates were closer together.
-
5. A dot plot shows 3 dots above 2, 4 dots above 3, 2 dots above 4 and 1 dot above 5. What is the median?
- 3.5
- 3
- 4
- 2
Show answer
Answer: B. There are 10 values: 2, 2, 2, 3, 3, 3, 3, 4, 4, 5. The 5th and 6th values are both 3, so the median is (3 + 3) ÷ 2 = 3.
Sign in to keep track of the lessons you finish.