• Foundation
  • About 15 min
  • 5 practice questions

Pinhole camera, periscope and kaleidoscope

Explain how a pinhole camera forms an inverted image, and how two or three plane mirrors make a periscope and a kaleidoscope work.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why a pinhole camera gives an upside-down image.
  • Describe how a periscope uses two plane mirrors to see over obstacles.
  • Describe how a kaleidoscope uses three mirrors to make repeating patterns.

Knowing that light travels in straight lines and is reflected by mirrors, we can build some simple and useful devices. Each one shows the science of this chapter at work.

The pinhole camera

In a dim room, place a lit candle (with an adult) in front of a piece of cardboard with a small hole, with a screen behind the cardboard. An image of the flame appears on the screen, but it is upside down (inverted).

Why? Light from the top of the flame travels in a straight line downwards through the hole and lands low on the screen. Light from the bottom of the flame travels upwards through the hole and lands high. The rays cross at the pinhole, so the image is inverted. Left and right are swapped too.

How a pinhole camera forms an image

  1. Light leaves every point of the object In straight lines.
  2. Only rays through the tiny hole get in One narrow ray from each point.
  3. Rays cross at the pinhole Top goes to bottom, bottom to top.
  4. Image on the screen Inverted, and in the object's colours.

Worked example 1: building one

  1. Take two cardboard boxes so that one slides snugly inside the other, and cut away one side of each.
  2. Make a small hole in the middle of the face opposite the open side of the bigger box.
  3. In the smaller box, cut a 5-6 cm square in the face opposite its open side and cover it with tracing paper to make a screen.
  4. Slide the smaller box into the bigger one, screen side in.
  5. Point the pinhole at a brightly lit tree or building, cover your head and the camera with a dark cloth, and slide the inner box until the image is clear.

Working: you see a coloured image of the tree, but upside down. The tracing paper, being translucent, lets you see the image from behind. The dark cloth keeps out stray light so the faint image is visible.

A pinhole camera forms an inverted image because light travels in straight lines that cross at the pinhole. A plane mirror's image is erect but laterally inverted.

The periscope

A periscope lets you see over or around obstacles. Fix two plane mirrors in a Z-shaped tube or box, one at the top and one at the bottom, each tilted at the same angle and facing each other. Light from an object enters the top opening, is reflected down the tube by the first mirror, and then reflected by the second mirror out of the bottom opening into your eye. Periscopes are used in submarines and by soldiers in bunkers; a simple one lets you look over taller friends in a crowd.

Light through a periscope

  1. Light from the object Enters the top opening.
  2. First mirror Reflects it down the tube.
  3. Second mirror Reflects it out to the eye.
  4. Viewer Sees an object that is not directly visible.

The kaleidoscope

Join three equal rectangular mirror strips (or strips of shiny reflective card) into a triangular prism and fit them in a tube of thick chart paper. Close one end with a clear plastic sheet, put a few pieces of coloured bangles or beads on it, and cover them with tracing paper. Looking in from the open end, you see a beautiful, symmetrical pattern. The pieces are reflected again and again in the three mirrors, making many images, and each time you turn the tube the pattern changes. Designers use kaleidoscopes to find ideas for patterns.

Worked example 2: two devices compared

Pinhole camera and periscope

  • Pinhole camera
    • Uses a tiny hole, no mirror
    • Depends on light travelling straight
    • Image is inverted
  • Periscope
    • Uses two plane mirrors
    • Depends on reflection
    • Image is upright, not upside down

Working: in a pinhole camera, rays from top and bottom cross at the hole, so the image is inverted. In a periscope, each mirror simply redirects the light, and the two reflections together leave the view upright. Both rely on light travelling in straight lines between surfaces.

Worked example 3: a small mirror and a big tree

Can a mirror only 10 cm tall show the whole image of a 10 m tree? Working: yes, if you stand far enough from the mirror. Light from every part of the tree reaches the mirror at different angles and is reflected to your eye. From a distance, the whole tree fits within the small mirror's view, although the image looks small because the tree is far away. Try it with a pocket mirror outdoors.

Key takeaways: a pinhole camera forms an inverted, coloured image because straight rays from the top and bottom of an object cross at the pinhole. A periscope uses two parallel plane mirrors to redirect light around obstacles. A kaleidoscope uses three mirrors to make repeated reflections of coloured pieces, producing changing symmetric patterns.

Check your understanding

  1. 1. The image of a candle flame in a pinhole camera is:

    1. Erect and the same way up
    2. Inverted (upside down)
    3. Always larger than the flame
    4. Formed without any light
    Show answer

    Answer: B. Rays from the top and bottom of the flame cross at the pinhole, so the image is upside down.

  2. 2. Why does a pinhole camera form an inverted image?

    1. The pinhole contains a mirror
    2. Light bends round the hole
    3. The screen turns the image over
    4. Light travels in straight lines that cross at the pinhole
    Show answer

    Answer: D. Straight rays from the top of the object go down through the hole and rays from the bottom go up, so the image is inverted.

  3. 3. How many plane mirrors does a simple periscope use?

    1. Two
    2. One
    3. Three
    4. None
    Show answer

    Answer: A. A periscope has two plane mirrors facing each other at the same tilt at the two ends of a Z-shaped tube.

  4. 4. What makes the pattern in a kaleidoscope?

    1. A pinhole forming an inverted image
    2. Coloured light emitted by the mirrors
    3. Repeated reflections of coloured pieces in three mirrors
    4. Shadows of the beads on the tube
    Show answer

    Answer: C. The three mirrors reflect the coloured pieces again and again, creating many images arranged in a symmetric pattern.

  5. 5. Where are periscopes useful?

    1. In a pinhole camera, to invert images
    2. In torches, to make light
    3. In submarines, to see above the water surface
    4. In kaleidoscopes, to add colour
    Show answer

    Answer: C. Periscopes let people see objects that are not in their direct line of sight, such as from a submarine.

Privacy · Terms · Refunds · Delivery