• Foundation
  • About 16 min
  • 5 practice questions

The water cycle, infiltration and groundwater

Describe how the Sun's heat drives the water cycle, explain how water seeps into the ground through different soils, and explain aquifers, groundwater depletion and ways to recharge it.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the stages of the water cycle: evaporation, transpiration, condensation and precipitation.
  • Explain infiltration using an experiment with clay, sand and gravel.
  • Explain what aquifers are and how rainwater harvesting and recharge pits help groundwater.

Wet clothes dry faster on a sunny day because the Sun's heat speeds up evaporation. On a much larger scale, the Sun's heat keeps water moving between the oceans, the sky and the land. This continuous movement is the water cycle.

The water cycle

Water exists in nature in three states: liquid in oceans, rivers and lakes; solid as snow, ice sheets and glaciers; and gas as water vapour in the air. In summer, some snow and ice melt by the Sun's radiation and flow down as rivers to the oceans; fresh snow replaces it in winter.

The water cycle

  1. Evaporation and transpiration The Sun heats oceans, rivers and lakes; water also leaves plants through transpiration.
  2. Condensation Rising water vapour cools and forms clouds.
  3. Precipitation Water falls back as rain, snow or hail.
  4. Collection and seepage Water flows into ponds, rivers and oceans, or seeps into the ground.

Then back to step 1: Evaporation and transpiration

The water cycle is the continuous movement of water: upward as water vapour and downward as precipitation, through soil, rocks and plants, and back to water bodies.

The water cycle redistributes and replenishes water in rivers, lakes and oceans, and it keeps the total amount of water on the Earth the same; water is not used up, only moved around.

Water seeping into the ground

Cut three 1-litre plastic bottles in half, make a small hole in each cap, and turn the top halves upside down over three identical beakers. Fill one with clay, one with sand and one with gravel. Pour 200 mL of water into each and collect what drips through in 10 minutes.

Worked example 1: comparing seepage

Illustrative results; your numbers will differ
MaterialWater collected in 10 min (example)Seepage
Clay20 mLVery slow
Sand110 mLSlow
Gravel180 mLFast

Working: out of 200 mL, gravel let through 180 mL, sand 110 mL and clay only 20 mL. The spaces between gravel pieces are wide and connected, so water passes easily; sand has smaller spaces; clay particles are very fine with tiny spaces, so water passes very slowly. Water still held in the bottle, for example 200 − 20 = 180 mL in the clay, stays trapped in the material for a while.

The seeping of surface water down through soil and rocks is called infiltration. Water infiltrates more easily where the spaces between soil and rock particles are wide, open and connected.

Groundwater and aquifers

The water that seeps down is stored in the pore spaces of sediments and in openings in rocks below the surface. This is groundwater. Underground layers of sediments and rocks that store water in their pore spaces are called aquifers. Wells, handpumps and bore wells draw water from aquifers, which may be a few metres to hundreds of metres below the ground depending on the place.

From rain to a well

  1. Rain falls Some runs off, some soaks in.
  2. Infiltration Water seeps through soil and rock.
  3. Aquifer Water is stored in pore spaces underground.
  4. Well or bore well People draw the groundwater.

Groundwater is not unlimited

As water needs grow, too much groundwater is being pumped out. In towns and cities, fewer trees and more concrete surfaces mean less rain soaks into the ground. As a result, groundwater levels fall in many places. Rainwater harvesting, which collects rain from rooftops and lets it soak into the ground, and recharge pits help refill the aquifers.

Worked example 2: an ice stupa

In Ladakh, streams can dry up in spring because the Sun is not yet warm enough to melt the mountain snow. In winter, people pipe stream water downhill and spray it into the freezing air, building a tall cone of ice called an ice stupa. Why does it help? Working: the ice stores winter water that would otherwise flow away. A cone shape exposes relatively little surface to the Sun for its size, so it melts slowly through spring, releasing water for farms just when it is most needed. It is a clever use of heat transfer and the water cycle.

Know a scientist

Varahamihira, an astronomer and mathematician of the sixth century CE in Ujjaini (modern Ujjain), described methods of predicting seasonal rainfall in his work Brihatsamhita, using observations of clouds, winds, and the positions of the stars and the Moon.

Key takeaways: the Sun's heat drives evaporation and transpiration; vapour condenses into clouds and returns as precipitation, so water keeps cycling. Water infiltrates fastest through gravel, slower through sand and slowest through clay. Groundwater is stored in aquifers and drawn by wells. Overuse and concrete surfaces deplete it, while rainwater harvesting and recharge pits help refill it.

Check your understanding

  1. 1. Which process forms clouds in the water cycle?

    1. Evaporation of ice
    2. Condensation of rising water vapour as it cools
    3. Infiltration into the soil
    4. Transpiration from roots only
    Show answer

    Answer: B. Water vapour rises, cools and condenses into tiny droplets that form clouds.

  2. 2. Rain, snow and hail falling from clouds are together called:

    1. Evaporation
    2. Condensation
    3. Infiltration
    4. Precipitation
    Show answer

    Answer: D. Water falling back to the Earth from clouds in any form is precipitation.

  3. 3. Through which material does water seep the fastest?

    1. Gravel
    2. Clay
    3. Sand
    4. All seep at exactly the same rate
    Show answer

    Answer: A. Gravel has the widest, most connected spaces, so water passes through it fastest; clay is slowest.

  4. 4. Underground layers of sediments and rocks that store water in their pore spaces are called:

    1. Glaciers
    2. Clouds
    3. Aquifers
    4. Sea breezes
    Show answer

    Answer: C. Aquifers hold groundwater, which is drawn up by wells and bore wells.

  5. 5. Why does groundwater get depleted in many cities?

    1. Rain falls only on concrete
    2. Aquifers make new water by themselves
    3. Too much is pumped out and concrete surfaces stop rain from soaking in
    4. Trees pump water into the ground
    Show answer

    Answer: C. Over-extraction and reduced infiltration (less vegetation, more concrete) lower groundwater levels.

Privacy · Terms · Refunds · Delivery