Revision notes

Chapter 8 Measurement of Time and Motion: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Measuring time before clocks

Early time-measuring devices
DeviceWhat it usesHow it measures time
SundialThe Sun's shadowThe position of an object's shadow changes during the day
Water clock (outflow type)Water flowing out of a marked vesselThe falling water level is read against markings
Water clock (sinking-bowl type)A bowl with a fine hole floating on waterIt fills and sinks in a fixed time, then is floated again
HourglassSand flowing from one bulb to anotherAll the sand runs through in a fixed time
Candle clockA marked candleEach mark burns down in a fixed time

From nature's cycles to clocks

  1. Repeating natural events Sunrise, Moon phases, seasons.
  2. Calendars Counting days, months and years.
  3. Devices for parts of a day Sundials, water clocks, hourglasses, candle clocks.
  4. Mechanical clocks Weights, gears and springs from the fourteenth century.
  5. Pendulum clocks and beyond Much more accurate timekeeping.

Every clock, old or new, counts a process that repeats in equal intervals of time.

Key takeaways: people first kept time using repeating events in nature, which gave calendars. Sundials used shadows, water clocks used flowing water, hourglasses used sand and candle clocks used burning wax to measure parts of a day. India's ghatika-yantra, a sinking bowl that took 24 minutes, divided the day into 60 ghatis. All clocks rely on something that repeats regularly.

Read the full lesson

Lesson 2

The simple pendulum and modern clocks

One complete oscillation

  1. Mean position O Start here.
  2. Extreme position A The bob stops for an instant and turns back.
  3. Back through O Moving fastest at the middle.
  4. Extreme position B Turns back again.
  5. Back to O One oscillation is complete.

Then back to step 1: Mean position O

Starting from A, going to B and back to A is also one oscillation

The time taken by a pendulum to complete one oscillation is called its time period.

Ishaan's readings
TrialTime for 10 oscillations (s)Time period (s)
120.120.1 ÷ 10 = 2.01
219.919.9 ÷ 10 = 1.99
320.020.0 ÷ 10 = 2.00
Fair tests on a pendulum
Change made (one at a time)Effect on time period
Longer string, same bobTime period increases
Shorter string, same bobTime period decreases
Heavier bob, same lengthNo change
Lighter bob, same lengthNo change

Key takeaways: a simple pendulum is a bob hung by a thread from a rigid support; its to-and-fro motion is oscillatory and periodic. One oscillation is O → A → B → O, and the time for it is the time period. Time several oscillations and divide to measure it accurately. The time period depends on the length, not the mass of the bob, which makes pendulums useful for clocks; modern clocks use quartz crystals or atoms.

Read the full lesson

Lesson 3

Units of time and the idea of speed

60 s = 1 min; 60 min = 1 h; so 1 h = 3,600 s.

Speed = Total distance covered ÷ Total time taken. SI unit: metre per second (m/s); also commonly kilometre per hour (km/h).

Converting speeds
Speed in km/hWorkingSpeed in m/s
3636 × 5/18 = 180 ÷ 1810
5454 × 5/18 = 270 ÷ 1815
7272 × 5/18 = 360 ÷ 1820
9090 × 5/18 = 450 ÷ 1825

Solving a speed problem

  1. Read the data Write distance and time with their units.
  2. Choose units Use m and s for m/s, or km and h for km/h.
  3. Convert if needed 1 km = 1,000 m; 1 h = 3,600 s.
  4. Divide Speed = distance ÷ time.
  5. Check Multiply speed by time to get back the distance.

Key takeaways: the SI unit of time is the second (s); 60 s = 1 min and 60 min = 1 h, and symbols are written lowercase with a space after the number. Speed is the distance covered in unit time: total distance ÷ total time. Its SI unit is m/s; km/h is also common. Multiply by 5/18 to change km/h into m/s, and convert to the same unit before comparing.

Read the full lesson

Lesson 4

Using speed to find distance and time; average speed

Speed = Distance ÷ Time; Distance = Speed × Time; Time = Distance ÷ Speed.

Speed, distance and time

  • To find speed
    • Divide distance by time
  • To find distance
    • Multiply speed by time
  • To find time
    • Divide distance by speed
Units must match: km with h for km/h, m with s for m/s

Average speed = Total distance covered ÷ Total time taken.

A car's journey
HourDistance covered (km)
First hour40
Second hour60
Third hour50

Key takeaways: distance = speed × time and time = distance ÷ speed; always use matching units. Speed found from a whole journey is the average speed: total distance ÷ total time, not the average of the speeds. A speedometer shows speed and an odometer shows distance travelled.

Read the full lesson

Lesson 5

Uniform and non-uniform linear motion

A train between two stations on a straight track

  1. Leaves station A Speeding up: non-uniform.
  2. From B to C Steady speed: uniform.
  3. Approaching station D Slowing down: non-uniform.
  4. Stops at D Journey complete.

Two kinds of linear motion

  • Uniform linear motion
    • Constant speed
    • Equal distances in equal times
    • Example: a car on an empty straight highway at steady speed
  • Non-uniform linear motion
    • Speed keeps changing
    • Unequal distances in equal times
    • Example: a car in city traffic

Uniform linear motion: equal distances in equal intervals of time along a straight line. Otherwise the motion is non-uniform.

Readings every 30 s on a straight road
Time (s)Scooter P: distance from start (m)P: distance in each 30 sScooter Q: distance from start (m)Q: distance in each 30 s
00-0-
30150150100100
60300150250150
90450150450200
120600150600150
Example from daily lifeUniform or non-uniform?
A bus in city trafficNon-uniform
A ball rolling to a stopNon-uniform
A runner starting a raceNon-uniform (speeding up)
A train running steadily for a few minutes on a straight trackRoughly uniform

Key takeaways: linear motion is motion along a straight line. In uniform linear motion an object covers equal distances in equal time intervals (constant speed); in non-uniform linear motion it covers unequal distances (changing speed). Check by finding the distance covered in each equal time interval. Most real motion is non-uniform, so we use average speed.

Read the full lesson

Privacy · Terms · Refunds · Delivery