• Foundation
  • About 15 min
  • 5 practice questions

The simple pendulum and modern clocks

Describe a simple pendulum and one oscillation, measure its time period from 10 oscillations, state what the time period depends on, and explain why pendulums, quartz and atoms make good clocks.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the parts of a simple pendulum and describe one complete oscillation.
  • Measure the time period of a pendulum accurately using 10 oscillations.
  • State that the time period depends on the length but not on the mass of the bob.

A swinging lamp once caught the attention of Galileo Galilei. Timing it with his own pulse, he found that each swing took the same time. After experimenting with different pendulums, he concluded that a pendulum of a given length always takes the same time for one swing. Inspired by this, Christiaan Huygens invented the pendulum clock in 1656, a huge step forward in accurate timekeeping.

The simple pendulum

A simple pendulum is a small heavy ball, called the bob, hung from a rigid support by a long thread. At rest, the bob hangs straight down at its mean position (O). Pull it slightly to one side and release it, and it swings to and fro between two extreme positions (A and B). This to-and-fro motion is oscillatory motion. It is also periodic, because the bob repeats its path after a fixed interval of time.

One complete oscillation

  1. Mean position O Start here.
  2. Extreme position A The bob stops for an instant and turns back.
  3. Back through O Moving fastest at the middle.
  4. Extreme position B Turns back again.
  5. Back to O One oscillation is complete.

Then back to step 1: Mean position O

Starting from A, going to B and back to A is also one oscillation

The time taken by a pendulum to complete one oscillation is called its time period.

Worked example 1: measuring the time period

Ishaan ties a heavy bob to a string so that its length from support to bob is 100 cm. He moves the bob slightly to one side, releases it without pushing, and times 10 oscillations three times.

Ishaan's readings
TrialTime for 10 oscillations (s)Time period (s)
120.120.1 ÷ 10 = 2.01
219.919.9 ÷ 10 = 1.99
320.020.0 ÷ 10 = 2.00

Working: the average time for 10 oscillations = (20.1 + 19.9 + 20.0) ÷ 3 = 60.0 ÷ 3 = 20.0 s, so the time period = 20.0 ÷ 10 = 2.0 s. Why time 10 oscillations instead of one? A single swing is short, and the error in starting and stopping a watch is about the same whatever you time. Spreading that error over 10 swings makes it ten times smaller per swing. The three readings are almost the same, showing that the time period of this pendulum is constant.

What does the time period depend on?

Fair tests on a pendulum
Change made (one at a time)Effect on time period
Longer string, same bobTime period increases
Shorter string, same bobTime period decreases
Heavier bob, same lengthNo change
Lighter bob, same lengthNo change

The time period of a simple pendulum depends on its length but not on the mass of its bob. All pendulums of the same length have the same time period at a given place. Because it stays constant, a pendulum can be used to measure time.

Worked example 2: a playground swing

A swing is a kind of pendulum. Meena times 10 oscillations of a swing as 35 s with her small brother on it, and 35 s again with her heavier friend on it. Working: time period = 35 ÷ 10 = 3.5 s both times. Changing the mass on the swing did not change the time period, just as for a simple pendulum. A swing with longer chains would take longer for each oscillation.

Modern clocks

Every clock counts a process that repeats regularly. Mechanical clocks driven by weights, gears and springs appeared from the fourteenth century, and pendulum clocks followed in the seventeenth. Huygens' early pendulum clocks could gain or lose about 10 seconds a day. Modern quartz clocks use the tiny, very rapid vibrations of a quartz crystal, and atomic clocks use vibrations linked to particular atoms. The best atomic clocks are so precise that they would lose only about one second in millions of years.

Key takeaways: a simple pendulum is a bob hung by a thread from a rigid support; its to-and-fro motion is oscillatory and periodic. One oscillation is O → A → B → O, and the time for it is the time period. Time several oscillations and divide to measure it accurately. The time period depends on the length, not the mass of the bob, which makes pendulums useful for clocks; modern clocks use quartz crystals or atoms.

Check your understanding

  1. 1. The time taken by a pendulum to complete one oscillation is called its:

    1. Time period
    2. Speed
    3. Distance
    4. Mean position
    Show answer

    Answer: A. One complete to-and-fro swing takes a fixed time, called the time period.

  2. 2. A pendulum completes 10 oscillations in 15 s. What is its time period?

    1. 15 s
    2. 150 s
    3. 0.15 s
    4. 1.5 s
    Show answer

    Answer: D. Time period = time for 10 oscillations ÷ 10 = 15 ÷ 10 = 1.5 s.

  3. 3. The bob of a pendulum is replaced with a heavier one of the same size; the length stays the same. What happens to the time period?

    1. It doubles
    2. It stays the same
    3. It halves
    4. It becomes zero
    Show answer

    Answer: B. The time period of a simple pendulum depends on its length, not on the mass of the bob.

  4. 4. Which change will increase the time period of a simple pendulum?

    1. Making the string longer
    2. Making the string shorter
    3. Using a lighter bob
    4. Using a heavier bob
    Show answer

    Answer: A. A longer pendulum takes more time for each oscillation.

  5. 5. Why is the time for 10 oscillations measured instead of just one?

    1. Because one oscillation cannot be seen
    2. Because the pendulum swings faster after 10 oscillations
    3. It reduces the effect of errors in starting and stopping the watch
    4. Because the time period changes every swing
    Show answer

    Answer: C. The starting and stopping error is about the same whatever is timed, so timing many oscillations makes the error per oscillation smaller.

Sign in to keep track of the lessons you finish.

Next lesson → Units of time and the idea of speed

Privacy · Terms · Refunds · Delivery