• Foundation
  • About 16 min
  • 5 practice questions

Projections, shadows and isometric drawing

Find projections of lines and shapes, draw the front, top and side views of solids, connect projections with shadows, and draw solids on an isometric grid.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Find the length of the projection of a line segment and describe projections of flat shapes.
  • Draw the front view, top view and side view of a solid made of simple shapes or cubes.
  • Explain isometric projection and draw solids on an isometric grid.

A net is one way to show a solid on paper, but it is hard to picture the solid from it. Engineers and architects usually show a solid by its projections: the shape it makes on a flat plane, seen straight on. This is the mathematical version of the 'profile' from the last lessons.

Projecting points and lines

To project a point P onto a plane, drop a line from P that is perpendicular to the plane (at right angles to every line in the plane through its foot). The point O where it meets the plane is the projection of P. The projection of an object is made of the projections of all its points.

For a line segment of length l, its projection has length p, which is never more than l. It equals l when the segment is parallel to the plane, and it shrinks to a single point when the segment is perpendicular to the plane. In between, the segment, its projection and the difference h in the distances of the two ends from the plane form a right triangle, so l² = p² + h².

Worked example 1: the length of a projection

A 13 cm stick is held near a wall so that one end is 5 cm farther from the wall than the other. How long is its projection on the wall?

p² = l² − h² = 13² − 5² = 169 − 25 = 144, so p = 12 cm. The projection is shorter than the stick, as expected.

Projections of flat shapes

A key fact: parallel lines project to parallel lines (or both to points, or onto one line). So a square can project to a square, a rectangle, a parallelogram or, seen edge-on, a line segment. A parallelogram always projects to a parallelogram or a line segment, never to a trapezium with only one pair of parallel sides. A regular polygon's projection is made of the projections of its sides, so a regular hexagon can look like a squashed hexagon whose opposite sides stay parallel.

Three views

Different objects can have the same projection: a cone and a square pyramid both look like a triangle from the front. So we usually give three projections on three mutually perpendicular planes: the front view (on a vertical plane behind the object), the top view (on the horizontal plane below it) and the side view (on a plane to one side).

Views of some solids standing on a table
SolidFront viewTop viewSide view
CubeSquareSquareSquare
Cylinder (upright)RectangleCircleRectangle
Cone (upright)TriangleCircle with its centre markedTriangle
Square pyramidTriangleSquare with its diagonalsTriangle
SphereCircleCircleCircle

Worked example 2: views of a stack of cubes

Three identical cubes stand in a row from left to right, facing you, and a fourth cube sits on top of the left one.

Front view: an L shape of 4 squares (3 along the bottom, 1 above the left one).
Top view: a row of 3 squares (from above, the top cube hides the cube under it).
Side view (from the right): a column of 2 squares, because the lower right cube hides the cubes behind it and the top cube shows above them.

Notice how each view loses some information, and how the three together pin the solid down.

Ways to show a solid on paper

  • Net
    • The solid unfolded flat
    • Good for making it
  • Three views
    • Front, top and side projections
    • Exact shapes; used in engineering drawings
  • Isometric drawing
    • One picture showing three directions
    • Equal lengths along length, depth and height

Shadows

Shine a torch at an object, at right angles to a wall. The shadow looks like the projection, but larger; moving the torch closer makes it larger still, because the light rays spread out from the torch. The farther away the light, the more nearly parallel its rays, and the closer the shadow is to the true projection. The Sun is so far away that, when sunlight falls at right angles on a surface, shadows are practically projections. Try it: the shadow of a cardboard parallelogram in sunlight is always a parallelogram (or a line).

Isometric projection and drawing

Balance a cube on one corner, with the opposite corner straight above it, and project it onto the floor. All 12 edges now make the same angle with the floor, so all their projections have equal length; isometric means 'equal measure'. The outline is a regular hexagon. Tiling paper with this pattern gives an isometric grid, which has lines in three directions: vertical lines for height, and two slanting directions for length and depth. To draw a solid, count units along these three directions, edge by edge; draw hidden lines faintly first and darken only the visible ones. Because parallel edges stay parallel and unit lengths stay equal, isometric drawings are easy to read and measure.

Parallel lines project to parallel lines. In an isometric projection of a cube, all edges project to equal lengths and the outline is a regular hexagon.

Key takeaways: a projection drops every point perpendicularly onto a plane; a segment's projection satisfies l² = p² + h². One projection can come from many solids, so engineers use front, top and side views. Sunlight shadows are almost projections. Isometric grids draw solids with equal units along length, depth and height.

Check your understanding

  1. 1. A 10 cm pencil is held near a wall with one end 6 cm farther from the wall than the other. How long is its projection on the wall?

    1. 4 cm
    2. 8 cm
    3. 10 cm
    4. 16 cm
    Show answer

    Answer: B. The pencil, its projection and the 6 cm difference form a right triangle with the pencil as hypotenuse: p² = 10² − 6² = 100 − 36 = 64, so p = 8 cm.

  2. 2. What is the top view of a cylinder standing upright on a table?

    1. A rectangle
    2. A triangle
    3. A circle
    4. A square
    Show answer

    Answer: C. Looking straight down on an upright cylinder you see its circular top. Its front and side views are rectangles.

  3. 3. Which shape can NOT be the projection of a parallelogram on a plane?

    1. A parallelogram
    2. A rectangle
    3. A line segment
    4. A trapezium with only one pair of parallel sides
    Show answer

    Answer: D. Parallel lines project to parallel lines, so both pairs of opposite sides stay parallel and the projection is a parallelogram (possibly a rectangle) or, edge-on, a line segment. It can never have just one pair of parallel sides.

  4. 4. A cube is balanced on one corner and projected onto the floor. What is the outline of its projection?

    1. A regular hexagon
    2. A square
    3. An equilateral triangle
    4. A circle
    Show answer

    Answer: A. In this isometric position all 12 edges project to equal lengths, and the outline is a regular hexagon. This is the basis of the isometric grid.

  5. 5. Three cubes stand in a row facing you, and a fourth cube sits on top of the left one. What is the front view?

    1. A row of 3 squares
    2. An L shape made of 4 squares
    3. A column of 2 squares
    4. A 2 by 2 square
    Show answer

    Answer: B. From the front you see all three bottom cubes and the cube above the left one: 3 squares along the bottom with 1 above the left end, an L shape of 4 squares. A row of 3 is the top view; a column of 2 is the side view.

Privacy · Terms · Refunds · Delivery