Revision notes

Chapter 4 Exploring Some Geometric Themes: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Fractals: the Sierpinski carpet and triangle

The rule repeated at every step

  1. Take every remaining square
  2. Divide it into a 3 by 3 grid of 9 smaller squares
  3. Remove the middle square, making a new hole
  4. Keep the 8 outer squares for the next step

Then back to step 1: Take every remaining square

The Sierpinski carpet (starting area 1 square unit)
StepSquares remainingHolesArea remaining
0101
1818/9
264964/81
351273512/729
n8ⁿ1 + 8 + … + 8ⁿ⁻¹(8/9)ⁿ

A fractal repeats the same rule at smaller and smaller scales. If each piece becomes k pieces at every step, there are kⁿ pieces at step n.

Key takeaways: fractals are self-similar: parts look like smaller copies of the whole. In the Sierpinski carpet each square becomes 8 squares and a hole, giving 8ⁿ squares and (8/9)ⁿ of the area at step n. In the Sierpinski triangle each triangle becomes 3 triangles and a hole, giving 3ⁿ triangles and (3/4)ⁿ of the area.

Read the full lesson

Lesson 2

The Koch snowflake and fractals in nature and art

What happens to every side at each step

  1. Divide the side into 3 equal parts
  2. Raise an equilateral triangle on the middle part Its sides are one-third of the old side.
  3. Remove the middle part itself The side becomes a 'bump' made of 4 short sides.
  4. Repeat on every side of the new shape
The Koch snowflake starting from a triangle of side 1 unit
StepNumber of sidesLength of each sidePerimeter
0313
1121/34
2481/916/3 ≈ 5.33
31921/2764/9 ≈ 7.11
n3 × 4ⁿ(1/3)ⁿ3 × (4/3)ⁿ

At each step of the Koch snowflake, every side is replaced by 4 sides, each one-third as long: the number of sides is multiplied by 4 and the perimeter by 4/3.

Three fractals side by side

  • Sierpinski carpet
    • Starts with a square
    • Each square → 8 squares + 1 hole
    • Area shrinks: (8/9)ⁿ
  • Sierpinski triangle
    • Starts with an equilateral triangle
    • Each triangle → 3 triangles + 1 hole
    • Area shrinks: (3/4)ⁿ
  • Koch snowflake
    • Starts with an equilateral triangle
    • Each side → 4 sides, one-third as long
    • Perimeter grows: 3 × (4/3)ⁿ

Key takeaways: in the Koch snowflake every side turns into 4 sides one-third as long, so at step n there are 3 × 4ⁿ sides and the perimeter is 3 × (4/3)ⁿ times the starting side. The perimeter grows without limit while the shape stays in a bounded region. Fractal-like self-similarity appears in ferns, trees and coastlines, and in temple towers and art.

Read the full lesson

Lesson 3

Visualising solids: profiles, faces, prisms and pyramids

Profiles of some solids
SolidFrom the sideFrom directly above
Cylinder standing on its baseRectangleCircle
Cone standing on its baseTriangleCircle
Square pyramidTriangleSquare
Triangular prism lying on a rectangular faceTriangle (from the end)Rectangle
Bucket shape (frustum of a cone)TrapeziumCircle
House-shaped prismPentagon (from the end)Rectangle

Prisms and pyramids

  • Prism
    • Two congruent polygons as opposite faces
    • Edges join matching vertices of the two polygons
    • Other faces are parallelograms (often rectangles)
    • Named after the polygon: triangular, pentagonal prism
  • Pyramid
    • One polygon as the base
    • A point (apex) outside the base
    • Edges join the apex to every vertex of the base
    • Triangular faces; a triangular pyramid is a tetrahedron

Prism with n-sided ends: n + 2 faces, 3n edges, 2n vertices. Pyramid with an n-sided base: n + 1 faces, 2n edges, n + 1 vertices.

Some common solids

  • Prisms
    • Cube and cuboid
    • Triangular prism
    • Pentagonal and hexagonal prisms
  • Pyramids
    • Tetrahedron (triangular pyramid)
    • Square pyramid
    • Pentagonal pyramid
  • Solids with curved surfaces
    • Cylinder
    • Cone
    • Sphere

Key takeaways: practise building shapes in your imagination. A solid's profile depends on the viewpoint, and different solids can share a profile. Faces are flat surfaces, edges are where faces meet, vertices are corners. For n-sided ends or base, a prism has n + 2 faces, 3n edges, 2n vertices; a pyramid has n + 1 faces, 2n edges, n + 1 vertices.

Read the full lesson

Lesson 4

Nets of solids and shortest paths on a cuboid

Some solids and their nets
SolidFaces in the netNumber of different nets
Cube6 squares11
Regular tetrahedron4 equilateral triangles2 (a big triangle, or a strip of 4)
Square pyramid1 square and 4 trianglesSeveral
Octahedron8 equilateral triangles11
Dodecahedron12 regular pentagons43,380
SphereNone: it cannot be flattened without wrinkles, gaps or overlapsNo net

Finding the shortest path on a box

  1. List the faces the path could cross
  2. Unfold those faces into one flat piece Do this in every sensible way.
  3. Join the two points with a straight line It must stay inside the unfolded piece.
  4. Measure it Often with a² + b² = c².
  5. Pick the shortest of all unfoldings

A path on the surface of a solid keeps its length on the net. The shortest surface path is the shortest straight line on some unfolding that stays inside the net.

Key takeaways: a net is a solid unfolded flat. A cube has 11 nets; a cylinder unfolds into a rectangle (height by circumference) and two circles; a cone's curved surface unfolds into part of a circle; a sphere has no net. To find a shortest path on a box, unfold it every sensible way, draw straight lines, and use the Baudhāyana-Pythagoras theorem to compare them.

Read the full lesson

Lesson 5

Projections, shadows and isometric drawing

Views of some solids standing on a table
SolidFront viewTop viewSide view
CubeSquareSquareSquare
Cylinder (upright)RectangleCircleRectangle
Cone (upright)TriangleCircle with its centre markedTriangle
Square pyramidTriangleSquare with its diagonalsTriangle
SphereCircleCircleCircle

Ways to show a solid on paper

  • Net
    • The solid unfolded flat
    • Good for making it
  • Three views
    • Front, top and side projections
    • Exact shapes; used in engineering drawings
  • Isometric drawing
    • One picture showing three directions
    • Equal lengths along length, depth and height

Parallel lines project to parallel lines. In an isometric projection of a cube, all edges project to equal lengths and the outline is a regular hexagon.

Key takeaways: a projection drops every point perpendicularly onto a plane; a segment's projection satisfies l² = p² + h². One projection can come from many solids, so engineers use front, top and side views. Sunlight shadows are almost projections. Isometric grids draw solids with equal units along length, depth and height.

Read the full lesson

Privacy · Terms · Refunds · Delivery