• Foundation
  • About 15 min
  • 5 practice questions

Area of a rhombus and a trapezium

Derive area = ½ × product of diagonals for a rhombus and area = ½ × height × sum of parallel sides for a trapezium, and use them, and their reverse, to solve problems.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Derive and use the formula ½ × d₁ × d₂ for the area of a rhombus.
  • Derive the trapezium formula ½ × h × (a + b) in two different ways.
  • Find a missing diagonal, side or height from a given area.

A rhombus is a parallelogram, so base × height works for it. But a rhombus also has special diagonals, and a trapezium has only one pair of parallel sides. Each gets a formula of its own, built from what we already know.

Rhombus

The diagonals of a rhombus cut each other in half at right angles. Let the diagonals be AC and BD, meeting at O. Diagonal BD splits the rhombus into triangles ABD and CBD, with common base BD and heights AO and CO (because the diagonals are perpendicular).

Area = ½ × BD × AO + ½ × BD × CO = ½ × BD × (AO + CO) = ½ × BD × AC.

A Śulba-Sūtra method shows the same thing by dissection: the rhombus can be cut and rearranged into a rectangle whose sides are one whole diagonal and half of the other.

Area of a rhombus = ½ × d₁ × d₂ (half the product of the diagonals). Area of a trapezium = ½ × h × (a + b), where a and b are the parallel sides and h the distance between them.

Worked example 1: a rhombus-shaped tile

A rhombus has diagonals 16 cm and 30 cm.

Area = ½ × 16 × 30 = 240 cm².
Its side: half-diagonals 8 and 15 meet at a right angle, so side² = 8² + 15² = 289 and the side is 17 cm. Using base × height: 17 × h = 240, so the height is 240 ÷ 17 ≈ 14.1 cm.

Trapezium

Method 1: a rectangle and two triangles. In trapezium WXYZ with WX ∥ ZY, drop perpendiculars WM and XN of height h onto ZY. WXNM is a rectangle (both angles at W and X are 90°, because co-interior angles add to 180°). Let WX = a, MZ = x and NY = y, so the longer side is b = x + a + y.
Area = ½hx + ha + ½hy = ½h(x + y + 2a). Since x + y = b − a, area = ½h(b − a + 2a) = ½h(a + b).

Method 2: two copies. Take two copies of the trapezium, turn one upside down and join them along a slanting side. The angles on each side add to 180°, so the joined shape is a parallelogram with base a + b and height h. The trapezium is half of it: ½h(a + b).

Two ways to the trapezium formula

  • Split it
    • Drop two heights
    • A rectangle a × h in the middle
    • Two triangles with bases x and y
    • ½h(x + y + 2a) = ½h(a + b)
  • Double it
    • Two copies, one turned over
    • Join along a slanting side
    • A parallelogram with base a + b
    • Half of h(a + b)

Worked example 2: using and reversing the formula

(a) A trapezium has parallel sides 12 cm and 20 cm, 7 cm apart. Area = ½ × 7 × (12 + 20) = ½ × 7 × 32 = 112 cm².

(b) A field shaped like a trapezium has area 360 m² and parallel sides 25 m and 15 m. Then ½ × h × 40 = 360, so 20h = 360 and the distance between the parallel sides is 18 m.

The trapezium formula contains the others
If…The shape becomes½h(a + b) becomes
a = bA parallelogram½h(2a) = ah
a = 0A triangle with base b½hb
a = b and the sides are uprightA rectangleah (length × width)

The formula also works for a trapezium whose top side hangs beyond the bottom, which you can check by writing it as a rectangle minus triangles, or as a parallelogram plus a triangle.

Key takeaways: a rhombus has area ½ × d₁ × d₂ because its perpendicular diagonals split it into two triangles on a common base. A trapezium has area ½ × h × (a + b), by splitting it into a rectangle and triangles or by doubling it into a parallelogram. Reverse the formulas to find a missing diagonal, side or height.

Check your understanding

  1. 1. What is the area of a rhombus with diagonals 20 cm and 15 cm?

    1. 300 cm²
    2. 150 cm²
    3. 35 cm²
    4. 75 cm²
    Show answer

    Answer: B. Area = ½ × 20 × 15 = ½ × 300 = 150 cm².

  2. 2. A trapezium has parallel sides 10 cm and 14 cm, 6 cm apart. What is its area?

    1. 72 cm²
    2. 144 cm²
    3. 84 cm²
    4. 60 cm²
    Show answer

    Answer: A. Area = ½ × 6 × (10 + 14) = 3 × 24 = 72 cm².

  3. 3. A rhombus has area 96 cm² and one diagonal 12 cm. How long is the other diagonal?

    1. 8 cm
    2. 24 cm
    3. 16 cm
    4. 4 cm
    Show answer

    Answer: C. ½ × 12 × d = 96, so 6d = 96 and d = 16 cm.

  4. 4. A trapezium-shaped plot has area 180 m² and parallel sides 16 m and 20 m. How far apart are the parallel sides?

    1. 5 m
    2. 9 m
    3. 20 m
    4. 10 m
    Show answer

    Answer: D. ½ × h × (16 + 20) = 180, so 18h = 180 and h = 10 m.

  5. 5. Two copies of a trapezium (parallel sides a and b, height h), one turned upside down, are joined along a slanting side. What shape do they make?

    1. A rectangle with sides a and b
    2. A parallelogram with base a + b and height h
    3. A triangle with base a + b
    4. A square of side h
    Show answer

    Answer: B. The angles along the joined side add up to 180°, so the outline is a parallelogram whose base is a + b and whose height is still h. Its area h(a + b) is twice the trapezium's.

Privacy · Terms · Refunds · Delivery