Revision notes

Chapter 7 Area: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Area of rectangles, paths and why perimeter is not area

Area of a rectangle = length × width. The diagonal cuts it into two congruent triangles, each with half the area.

Perimeter and area do not move together
RectanglePerimeterArea
10 cm × 1 cm22 cm10 cm²
5 cm × 4 cm18 cm20 cm²
6 cm × 3 cm18 cm18 cm²

Perimeter versus area

  • Perimeter
    • Length of the boundary
    • Measured in cm, m
    • Rectangle: 2 × (length + width)
    • Fencing, borders, lace
  • Area
    • Amount of surface covered
    • Measured in cm², m²
    • Rectangle: length × width
    • Painting, tiling, carpets

Finding the area of a path

  1. Sketch the plot and the path Mark every length you know.
  2. Choose a method Outer − inner, or split into rectangles.
  3. Watch for overlaps Subtract any part counted twice.
  4. Check with the other method

Key takeaways: area counts unit squares; a rectangle has area length × width, and the triangle cut off by its diagonal has half that. Perimeter and area are different measures: a larger perimeter does not mean a larger area. For paths, subtract inner from outer, or split into rectangles and remove any overlap.

Read the full lesson

Lesson 2

Area of a triangle and what it tells us

Area of a triangle = ½ × base × height, where the height is the perpendicular distance from the opposite vertex to the line of the base.

Why area is half base times height

  1. Draw a line through the top vertex parallel to the base
  2. Complete a rectangle on the base Its sides are the base and the height.
  3. Drop the altitude It splits the rectangle into two rectangles.
  4. Each side of the triangle is a diagonal The triangle is half of each part.
  5. Triangle = ½ × base × height

Key takeaways: area of a triangle = ½ × base × height for every triangle, with the height perpendicular to the chosen base. Writing the area in two ways finds a missing height. A median halves a triangle's area, and triangles on the same base between the same parallels have equal areas.

Read the full lesson

Lesson 3

Areas of polygons and parallelograms

Turning a parallelogram into a rectangle

  1. Draw a height from one top corner to the base
  2. Cut off the right triangle it makes
  3. Slide the triangle to the other end It is congruent to the gap there (RHS).
  4. A rectangle appears Its length is the base and its width the height.

Area of a parallelogram = base × height, where the height is perpendicular to the chosen base. Any side can be the base, with its own height.

Parallelograms on the same base 8 cm, between the same parallel lines 5 cm apart
ShapeBaseHeightAreaPerimeter
Rectangle8 cm5 cm40 cm²26 cm (smallest)
Leaning parallelogram8 cm5 cm40 cm²More than 26 cm
Very leaning parallelogram8 cm5 cm40 cm²Larger still

Key takeaways: any polygon can be split into triangles, so its area is the sum of triangle areas. A parallelogram can be dissected into a rectangle, so its area is base × height. Parallelograms on the same base between the same parallels have equal areas, but the more they lean, the larger their perimeter.

Read the full lesson

Lesson 4

Area of a rhombus and a trapezium

Area of a rhombus = ½ × d₁ × d₂ (half the product of the diagonals). Area of a trapezium = ½ × h × (a + b), where a and b are the parallel sides and h the distance between them.

Two ways to the trapezium formula

  • Split it
    • Drop two heights
    • A rectangle a × h in the middle
    • Two triangles with bases x and y
    • ½h(x + y + 2a) = ½h(a + b)
  • Double it
    • Two copies, one turned over
    • Join along a slanting side
    • A parallelogram with base a + b
    • Half of h(a + b)
The trapezium formula contains the others
If…The shape becomes½h(a + b) becomes
a = bA parallelogram½h(2a) = ah
a = 0A triangle with base b½hb
a = b and the sides are uprightA rectangleah (length × width)

Key takeaways: a rhombus has area ½ × d₁ × d₂ because its perpendicular diagonals split it into two triangles on a common base. A trapezium has area ½ × h × (a + b), by splitting it into a rectangle and triangles or by doubling it into a parallelogram. Reverse the formulas to find a missing diagonal, side or height.

Read the full lesson

Lesson 5

Changing shapes and measuring areas in real life

Any triangle into a rectangle (Śulba-Sūtra style)

  1. Join the midpoints of the two slanting sides This cut is parallel to the base, at half the height.
  2. Cut the small top triangle along its altitude
  3. Swing each piece down to a corner They fill the gaps at the two ends.
  4. Rectangle: base b, height ½h Area b × ½h = ½bh, unchanged.
Useful conversions
LengthArea
1 in = 2.54 cm1 in² = 6.4516 cm²
1 ft = 12 in1 ft² = 144 in²
1 m = 100 cm1 m² = 10,000 cm²
1 km = 1000 m1 km² = 10,00,000 m²
—1 acre = 43,560 ft²

To convert an area, square the length conversion: 1 in = 2.54 cm gives 1 in² = 2.54 × 2.54 = 6.4516 cm².

Key takeaways: cutting and rearranging keeps area: an isosceles triangle becomes a rectangle of half the base and the full height, and any triangle can become a rectangle of the same base and half the height. Convert area units by squaring length conversions: 1 in² = 6.4516 cm², 1 ft² = 144 in², 1 m² = 10,000 cm², 1 km² = 10,00,000 m².

Read the full lesson

Privacy · Terms · Refunds · Delivery