• Foundation
  • About 16 min
  • 5 practice questions

Measuring mass and volume to find density

Measure mass with a digital balance, read a measuring cylinder correctly, find the volume of regular and irregular solids, and use the results to calculate density.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Use the tare button of a digital balance to measure the mass of an object or liquid.
  • Find the smallest reading of a measuring cylinder and read the meniscus correctly.
  • Find the volume of regular and irregular solids and calculate density.

To find density we need two measurements: mass and volume. Each needs the right instrument and careful technique.

Measuring mass

Using a digital balance

  1. Switch on The display should read zero; if not, press tare (reset)
  2. Place a clean watch glass or butter paper on the pan It shows the container's mass
  3. Press tare again The display returns to zero, so the container is not counted
  4. Add the object The reading is the object's mass alone

For a liquid, use a beaker instead of a watch glass, tare it, then pour in the liquid. (Most balances actually respond to weight but are marked in grams or kilograms; in scientific language, mass is in grams and weight is in newtons.)

Measuring volume of a liquid

Volume is the space an object occupies. SI unit: m³; smaller units are dm³ and cm³ (also called cc). For liquids, 1 litre = 1 dm³ and 1 mL = 1 cm³. A measuring cylinder is a tall, narrow, transparent cylinder marked in mL.

Worked example 1: smallest reading of a cylinder

A 50 mL measuring cylinder has numbered marks every 5 mL, with 10 small divisions between them. What is its smallest reading? Working: smallest reading = value between numbered marks ÷ number of divisions = 5 mL ÷ 10 = 0.5 mL. Check: 10 × 0.5 = 5.

Choose a cylinder close in size to the volume you need. To measure 70 mL, a 100 mL cylinder is best: a 50 mL one needs two fillings, and a 500 mL one has larger divisions and so is less accurate. Tall, narrow cylinders are used because a small change in volume makes a large change in height, making readings more precise.

Water in a cylinder has a curved surface called the meniscus. For water and other colourless liquids, read the mark level with the bottom of the meniscus; for coloured liquids, read the top. Keep your eye level with the meniscus.

Volume of solids

Finding the volume of a solid
ShapeMethodExample
Regular (cuboid)Volume = length × width × heightA box 20 cm × 15 cm × 1.5 cm = 450 cm³
Irregular (stone, key)Displacement: volume = final water level − initial water levelWater rises from 60 mL to 72 mL, so volume = 12 mL = 12 cm³

Volume of an irregular solid by displacement

  1. Pour water Fill a measuring cylinder to a known level, for example 60 mL
  2. Lower the object on a thread Gently, so no water splashes out
  3. Read the new level For example 72 mL
  4. Subtract 72 mL − 60 mL = 12 mL = 12 cm³

Worked example 2: density of a stone

A stone's mass on a tared digital balance is 30 g. In a measuring cylinder, the water rises from 60 mL to 72 mL when the stone is lowered in. Find its density. Working: volume = 72 − 60 = 12 mL = 12 cm³. Density = 30 g ÷ 12 cm³ = 2.5 g/cm³. Check: 2.5 × 12 = 30. Since 2.5 > 1, it sinks in water, as observed.

Worked example 3: a regular block

A wooden block measures 10 cm × 5 cm × 4 cm and has a mass of 140 g. Find its density. Working: volume = 10 × 5 × 4 = 200 cm³. Density = 140 ÷ 200 = 0.7 g/cm³. Check: 0.7 × 200 = 140. It is less dense than water, so it floats.

For an irregular solid, volume = final level − initial level in a measuring cylinder; 1 mL = 1 cm³. Then density = mass ÷ volume.

Key takeaways: tare the balance so only the object's mass is shown. Find a measuring cylinder's smallest reading by dividing the value between numbered marks by the number of divisions, choose a suitable size, and read the bottom of the meniscus for clear liquids. Regular solids: volume = l × w × h; irregular solids: volume by water displacement. Then density = mass ÷ volume.

Check your understanding

  1. 1. Why is the tare button pressed after placing an empty watch glass on a digital balance?

    1. To make the object heavier
    2. To measure the volume of the watch glass
    3. To switch the balance off
    4. So that the balance shows only the mass of the object added later
    Show answer

    Answer: D. Taring resets the display to zero with the watch glass on, so the next reading is the object's mass alone.

  2. 2. Where should you read the level of water in a measuring cylinder?

    1. At the bottom of the meniscus, with your eye level with it
    2. At the top of the meniscus, looking from above
    3. Anywhere along the curve
    4. At the top edge of the cylinder
    Show answer

    Answer: A. For water and other colourless liquids, read the mark that matches the bottom of the curved surface, keeping your eye level with it.

  3. 3. Water in a cylinder rises from 40 mL to 55 mL when a key is lowered in. What is the key's volume?

    1. 95 cm³
    2. 55 cm³
    3. 15 cm³
    4. 40 cm³
    Show answer

    Answer: C. Volume = final level − initial level = 55 − 40 = 15 mL, and 1 mL = 1 cm³, so 15 cm³.

  4. 4. A 100 mL measuring cylinder has 10 divisions between the 10 mL and 20 mL marks. What is its smallest reading?

    1. 10 mL
    2. 1 mL
    3. 0.1 mL
    4. 2 mL
    Show answer

    Answer: B. Smallest reading = 10 mL ÷ 10 divisions = 1 mL.

  5. 5. A cuboid is 4 cm × 3 cm × 2 cm and has a mass of 48 g. What is its density?

    1. 24 g/cm³
    2. 0.5 g/cm³
    3. 2 g/cm³
    4. 96 g/cm³
    Show answer

    Answer: C. Volume = 4 × 3 × 2 = 24 cm³. Density = 48 g ÷ 24 cm³ = 2 g/cm³. Check: 2 × 24 = 48.

Privacy · Terms · Refunds · Delivery