- Foundation
- About 15 min
- 5 practice questions
Plotting points and planning spaces with coordinates
Plot any point on graph paper, find the lengths of sides that are parallel to the axes, and use coordinates to place furniture or find a missing corner of a rectangle on a floor plan.
If something looks wrong, please tell us.
By the end of this lesson you can
- Plot a point (x, y) correctly by moving along the x-axis first and then parallel to the y-axis.
- Find the length of a segment parallel to an axis as |x₂ − x₁| or |y₂ − y₁|.
- Use coordinates to find a missing corner of a rectangle and to place an object at the centre of a room.
Architects, town planners and game designers all work with coordinates. Once the corners of a room or a screen have numbers, you can answer practical questions by simple subtraction: Will the table fit? Is the door wide enough for a wheelchair? Where is the exact centre?
How to plot a point
Plotting the point (x, y)
- Start at the origin O Every point is measured from (0, 0).
- Move along the x-axis Go x units: right if x is positive, left if x is negative.
- Move parallel to the y-axis Go y units: up if y is positive, down if y is negative.
- Mark and label the point Write its name and coordinates beside the dot.
Lengths of segments parallel to the axes
If two points have the same y-coordinate, the segment joining them is horizontal (parallel to the x-axis) and its length is the difference of the x-coordinates. If they have the same x-coordinate, the segment is vertical and its length is the difference of the y-coordinates. Using absolute value keeps the answer positive whatever order you subtract in.
Distance between (x₁, y) and (x₂, y) = |x₂ − x₁|. Distance between (x, y₁) and (x, y₂) = |y₂ − y₁|.
Worked example 1: the missing leg of a table
A rectangular study table has three of its feet at (2, 3), (7, 3) and (7, 6) on a floor plan where 1 unit = 1 foot. Where is the fourth foot, and what are the table's length and width? Working: (2, 3) and (7, 3) share y = 3, so that side is horizontal with length |7 − 2| = 5. (7, 3) and (7, 6) share x = 7, so that side is vertical with length |6 − 3| = 3. In a rectangle the fourth corner must line up with (2, 3) vertically and with (7, 6) horizontally, so it has x = 2 and y = 6. The fourth foot is at (2, 6). The table is 5 feet long and 3 feet wide. A floor plan cannot show its height.
| Corner | Coordinates | Joined to | Side length |
|---|---|---|---|
| P | (2, 3) | Q (7, 3) | |7 − 2| = 5 |
| Q | (7, 3) | R (7, 6) | |6 − 3| = 3 |
| R | (7, 6) | S (2, 6) | |7 − 2| = 5 |
| S | (2, 6) | P (2, 3) | |6 − 3| = 3 |
Worked example 2: a table at the centre of a room
A dining room is a rectangle 12 feet by 10 feet, with corners at O (0, 0), (12, 0), (12, 10) and (0, 10). A rectangular table 4 feet long (along the x-direction) and 2 feet wide is to be placed exactly in the centre. Find the coordinates of its corners. Working: the centre of the room is halfway along each side: x = 12 ÷ 2 = 6 and y = 10 ÷ 2 = 5, so the centre is (6, 5). The table extends half its length, 4 ÷ 2 = 2, to each side of x = 6, giving x = 4 and x = 8. It extends half its width, 2 ÷ 2 = 1, above and below y = 5, giving y = 4 and y = 6. The corners are (4, 4), (8, 4), (8, 6) and (4, 6). Check: length 8 − 4 = 4 and width 6 − 4 = 2. Correct.
Worked example 3: comparing two doors
The room door runs from (4, 0) to (7.5, 0) and the bathroom door runs along the y-axis from (0, 2) to (0, 4.5). Which is wider? Working: room door width = |7.5 − 4| = 3.5 feet. Bathroom door width = |4.5 − 2| = 2.5 feet. The room door is wider, by 3.5 − 2.5 = 1 foot. Questions like this help planners check whether a doorway is wide enough for a wheelchair user, which is part of designing buildings that everyone can use.
Key takeaways: plot (x, y) by moving x along the x-axis and then y parallel to the y-axis. When two points share a y-coordinate the segment is horizontal and its length is |x₂ − x₁|; when they share an x-coordinate the segment is vertical and its length is |y₂ − y₁|. In a rectangle with sides parallel to the axes, each corner shares one coordinate with each neighbour, which lets you find a missing corner. The centre of a rectangle is halfway along each direction.
Check your understanding
-
1. Three corners of a rectangle with sides parallel to the axes are (−1, 2), (4, 2) and (4, −3). What is the fourth corner?
- (−3, −1)
- (−1, −3)
- (4, 4)
- (−1, 4)
Show answer
Answer: B. The fourth corner lines up vertically with (−1, 2), so x = −1, and horizontally with (4, −3), so y = −3. The fourth corner is (−1, −3).
-
2. What is the length of the segment joining (−5, 3) and (6, 3)?
- 1 unit
- 6 units
- 3 units
- 11 units
Show answer
Answer: D. The points share y = 3, so the segment is horizontal. Length = |6 − (−5)| = |6 + 5| = 11 units.
-
3. To plot the point (−4, 2), which moves do you make from the origin?
- 4 units right, then 2 units down
- 2 units left, then 4 units up
- 4 units left, then 2 units up
- 4 units up, then 2 units left
Show answer
Answer: C. Move along the x-axis first: x = −4 means 4 units to the left. Then move parallel to the y-axis: y = 2 means 2 units up.
-
4. A room has corners (0, 0), (16, 0), (16, 12) and (0, 12). What are the coordinates of its centre?
- (8, 6)
- (6, 8)
- (16, 12)
- (4, 3)
Show answer
Answer: A. Halfway along the x-direction is 16 ÷ 2 = 8, and halfway along the y-direction is 12 ÷ 2 = 6. The centre is (8, 6); (6, 8) has the coordinates swapped.
-
5. A window on a plan runs along a wall from (0, 3.5) to (0, 8). How wide is the window, with 1 unit = 1 foot?
- 11.5 feet
- 3.5 feet
- 8 feet
- 4.5 feet
Show answer
Answer: D. Both ends have x = 0, so the window lies along the y-axis. Width = |8 − 3.5| = 4.5 feet.
Sign in to keep track of the lessons you finish.