Revision notes

Chapter 1 Orienting Yourself: The Use of Coordinates: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Axes, origin and points on the axes

The coordinate plane

  • x-axis
    • The horizontal number line
    • Right of O is positive, left of O is negative
  • y-axis
    • The vertical number line
    • Above O is positive, below O is negative
  • Origin O
    • The point where the axes cross
    • Its coordinates are (0, 0)
Two perpendicular number lines turn a flat surface into a coordinate plane.
Sign conventions on the axes
Direction from OAlong which axisSign of the number
Rightx-axisPositive (+)
Leftx-axisNegative (−)
Upy-axisPositive (+)
Downy-axisNegative (−)

A point on the x-axis is (x, 0); a point on the y-axis is (0, y); the origin is (0, 0). Right and up are positive, left and down are negative.

Key takeaways: two perpendicular axes meeting at the origin O (0, 0) let two numbers fix any point on a flat surface. Right and up are positive; left and down are negative. Points on the x-axis look like (x, 0) and points on the y-axis look like (0, y). The distance between two points on the same axis is the absolute value of the difference of the changing coordinate.

Read the full lesson

Lesson 2

Quadrants and the meaning of (x, y)

In P (x, y), x is the signed distance of P from the y-axis and y is the signed distance of P from the x-axis. The x-coordinate is always written first.

Signs of the coordinates in each quadrant

  • Quadrant I
    • Top right
    • x positive, y positive
    • Form (+, +)
  • Quadrant II
    • Top left
    • x negative, y positive
    • Form (−, +)
  • Quadrant III
    • Bottom left
    • x negative, y negative
    • Form (−, −)
  • Quadrant IV
    • Bottom right
    • x positive, y negative
    • Form (+, −)
Quadrants are numbered anticlockwise from the top-right.
Reading location from signs
PointSign of xSign of yLocation
A (−3, 7)−+Quadrant II
B (5, −2)+−Quadrant IV
C (−1.5, −6)−−Quadrant III
D (0, 4)zero+On the y-axis
E (8, 0)+zeroOn the x-axis

Key takeaways: the x-coordinate is the signed distance from the y-axis and the y-coordinate is the signed distance from the x-axis. The axes split the plane into quadrants I to IV, with sign patterns (+, +), (−, +), (−, −) and (+, −). Points on an axis are in no quadrant. (x, y) is an ordered pair: (x, y) = (y, x) only when x = y. All points on a line parallel to the y-axis share the same x-coordinate.

Read the full lesson

Lesson 3

Plotting points and planning spaces with coordinates

Plotting the point (x, y)

  1. Start at the origin O Every point is measured from (0, 0).
  2. Move along the x-axis Go x units: right if x is positive, left if x is negative.
  3. Move parallel to the y-axis Go y units: up if y is positive, down if y is negative.
  4. Mark and label the point Write its name and coordinates beside the dot.
Always do the x-move first, then the y-move.

Distance between (x₁, y) and (x₂, y) = |x₂ − x₁|. Distance between (x, y₁) and (x, y₂) = |y₂ − y₁|.

The table PQRS: opposite sides are equal
CornerCoordinatesJoined toSide length
P(2, 3)Q (7, 3)|7 − 2| = 5
Q(7, 3)R (7, 6)|6 − 3| = 3
R(7, 6)S (2, 6)|7 − 2| = 5
S(2, 6)P (2, 3)|6 − 3| = 3

Key takeaways: plot (x, y) by moving x along the x-axis and then y parallel to the y-axis. When two points share a y-coordinate the segment is horizontal and its length is |x₂ − x₁|; when they share an x-coordinate the segment is vertical and its length is |y₂ − y₁|. In a rectangle with sides parallel to the axes, each corner shares one coordinate with each neighbour, which lets you find a missing corner. The centre of a rectangle is halfway along each direction.

Read the full lesson

Lesson 4

Distance between two points

Finding the distance between A (x₁, y₁) and B (x₂, y₂)

  1. Horizontal shift Find x₂ − x₁.
  2. Vertical shift Find y₂ − y₁.
  3. Square both shifts Squares are never negative, so signs no longer matter.
  4. Add the squares This gives AB².
  5. Take the square root AB = √[(x₂ − x₁)² + (y₂ − y₁)²]

Distance formula: the distance between (x₁, y₁) and (x₂, y₂) is √[(x₂ − x₁)² + (y₂ − y₁)²]. In particular, the distance of (x, y) from the origin is √(x² + y²).

— Baudhāyana–Pythagoras theorem
Images under reflection in the axes
Reflection inImage of (x, y)Example: image of (3, −5)
y-axis(−x, y)(−3, −5)
x-axis(x, −y)(3, 5)

Key takeaways: for any two points, form the horizontal shift x₂ − x₁ and the vertical shift y₂ − y₁, square both, add, and take the square root. Signs do not matter after squaring, so the order of the points does not matter either. Distance from the origin is √(x² + y²). Reflection in the y-axis sends (x, y) to (−x, y); in the x-axis it sends (x, y) to (x, −y); either way lengths stay the same.

Read the full lesson

Lesson 5

Using coordinates: straight lines, midpoints, circles and squares

Midpoint of the segment joining (x₁, y₁) and (x₂, y₂) = ((x₁ + x₂) ÷ 2, (y₁ + y₂) ÷ 2).

What the distance formula can test

  • Collinear points
    • Shorter two distances add up to the longest
  • Midpoint
    • Equal distances to both ends
    • Coordinates are averages
  • Circle
    • Distance from centre compared with radius
  • Square
    • Four equal sides
    • Two equal diagonals

Key takeaways: three points are collinear when the two shorter distances add up exactly to the longest. The midpoint's coordinates are the averages of the endpoints' coordinates. Compare d² with r² to place a point inside, on or outside a circle. Four equal sides together with equal diagonals make a square.

Read the full lesson

Privacy · Terms · Refunds · Delivery