- Foundation
- About 16 min
- 5 practice questions
Cones and pyramids
Use the slant height l² = h² + r² to find the curved and total surface area of a cone, find its volume as one-third of a cylinder's, and find the volume and surface area of a pyramid.
If something looks wrong, please tell us.
By the end of this lesson you can
- Relate the radius, height and slant height of a cone by l² = h² + r², and describe a cone as a right triangle turned about one leg.
- Find the curved surface area πrl, total surface area πr(l + r) and volume ⅓πr²h of a cone.
- Find the volume of a pyramid as ⅓ × base area × height and its surface area by adding its faces.
An ice-cream cone, a birthday cap and a funnel are cones. Spin a right-angled triangle about one of its two shorter sides and it sweeps out a right circular cone: the side you spin about becomes the height h, the other short side becomes the base radius r, and the long side becomes the slant height l.
For a right circular cone: l² = h² + r² (Baudhāyana–Pythagoras theorem); curved surface area = πrl; total surface area = πrl + πr² = πr(l + r); volume = ⅓πr²h.
Curved surface area
Cut a paper cone along a slant edge and flatten it: you get a sector of a circle with radius l, whose curved edge has length 2πr (the rim of the cone's base). Now cut this sector into many very thin slices. Each slice is almost a thin triangle of height l with a tiny base. The area of a triangle is ½ × base × height, so the total area is ½ × (sum of all the tiny bases) × l = ½ × 2πr × l = πrl.
Volume: one-third of a cylinder
Make a hollow paper cone with the same base radius and the same height as a cylindrical tin. Fill the cone with fine sand or salt and pour it into the tin. It takes three cone-fulls to fill the tin. So a cone holds one-third of the cylinder with the same base and height. Proving the exact ⅓ needs calculus, which you will meet in higher classes.
Cylinder and cone with the same r and h
-
Cylinder
- Curved surface 2πrh
- Volume πr²h
- Cross-sections all the same circle
-
Cone
- Curved surface πrl
- Volume ⅓πr²h
- Cross-sections shrink to a point at the top
Worked example 1: a cone from its radius and height
A cone has radius 9 cm and height 12 cm. Find its slant height, CSA, TSA and volume (π = 3.14).
Working: l² = 12² + 9² = 144 + 81 = 225, so l = 15 cm. CSA = πrl = π × 9 × 15 = 135π ≈ 423.9 cm². TSA = πr(l + r) = π × 9 × 24 = 216π ≈ 678.24 cm². Volume = ⅓ × π × 81 × 12 = 324π ≈ 1017.36 cm³.
Worked example 2: spinning a triangle
A right triangle with sides 8 cm, 15 cm and 17 cm is turned through 360° about its 15 cm side. Find the volume and curved surface area of the solid (π = 3.14).
Working: 8² + 15² = 64 + 225 = 289 = 17², so the right angle is between the 8 cm and 15 cm sides. Turning about the 15 cm side gives a cone with h = 15 cm, r = 8 cm and l = 17 cm. Volume = ⅓ × π × 64 × 15 = 320π ≈ 1004.8 cm³. CSA = π × 8 × 17 = 136π ≈ 427.04 cm².
Pyramids
A pyramid has a flat base (a triangle, a square or any polygon) and one point, the apex, outside the plane of the base, joined to every point of the base. A cone is like a pyramid with a circular base, and the volume rule is the same:
Volume of a pyramid = ⅓ × area of base × height (height measured straight up from the base to the apex). Surface area = sum of the areas of all its faces.
Worked example 3: a square pyramid
A pyramid has a square base of side 10 m and height 12 m, with the apex directly above the centre of the base. Find its volume and total surface area.
Working: volume = ⅓ × (10 × 10) × 12 = ⅓ × 1200 = 400 m³. Each sloping face is a triangle with base 10 m. Its height runs from the apex to the middle of a base edge: that point is 5 m from the centre, so the face height is √(12² + 5²) = √169 = 13 m. Area of one face = ½ × 10 × 13 = 65 m², four faces = 260 m², plus the base 100 m². Total surface area = 360 m².
Worked example 4: scaling a cone
If both the radius and the height of a cone are doubled, its volume becomes ⅓π(2r)²(2h) = 8 × ⅓πr²h, that is, 8 times as large.
Key takeaways: for a cone, first find whichever of r, h, l is missing using l² = h² + r². CSA = πrl comes from the unrolled sector; TSA adds the base πr². A cone's volume is one-third of the cylinder on the same base and height, and any pyramid's volume is ⅓ × base area × height.
Check your understanding
-
1. A cone has base radius 6 cm and height 8 cm. What is its slant height?
- 14 cm
- 10 cm
- 7 cm
- 48 cm
Show answer
Answer: B. l² = h² + r² = 64 + 36 = 100, so l = 10 cm.
-
2. What is the curved surface area of a cone with radius 7 cm and slant height 15 cm? (π = 22/7)
- 154 cm²
- 484 cm²
- 330 cm²
- 660 cm²
Show answer
Answer: C. CSA = πrl = 22/7 × 7 × 15 = 22 × 15 = 330 cm². Adding the base 154 cm² would give the TSA, 484 cm².
-
3. What is the volume of a cone with radius 3 cm and height 7 cm? (π = 22/7)
- 66 cm³
- 198 cm³
- 22 cm³
- 132 cm³
Show answer
Answer: A. V = ⅓πr²h = ⅓ × 22/7 × 9 × 7 = ⅓ × 198 = 66 cm³.
-
4. A cylindrical jar holds 600 mL. How much does a cone with the same base radius and height hold?
- 300 mL
- 1800 mL
- 400 mL
- 200 mL
Show answer
Answer: D. A cone's volume is one-third of the cylinder with the same base and height: 600 ÷ 3 = 200 mL.
-
5. A pyramid has a square base of side 6 cm and a height of 10 cm. What is its volume?
- 360 cm³
- 180 cm³
- 120 cm³
- 60 cm³
Show answer
Answer: C. V = ⅓ × base area × height = ⅓ × (6 × 6) × 10 = ⅓ × 360 = 120 cm³.
Sign in to keep track of the lessons you finish.