Revision notes

Chapter 14 Math of Space: Surface Area and Volume: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Cuboids and cubes: surface area and volume

The six faces of a cuboid

  • Top and bottom
    • Each is l × w
    • Together 2lw
  • Front and back
    • Each is l × h
    • Together 2lh
  • Left and right
    • Each is w × h
    • Together 2wh

Cuboid: total surface area = 2(lw + wh + hl); volume = l × w × h. Cube of side a: total surface area = 6a²; volume = a³.

Converting units of area and volume
UnitEquals
1 m100 cm
1 m²100 × 100 = 10,000 cm²
1 m³100 × 100 × 100 = 10,00,000 cm³
1 litre1000 cm³
1 m³1000 litres

Key takeaways: a cuboid's surface area is 2(lw + wh + hl) and its volume is lwh; a cube's are 6a² and a³. Volume = base area × height. Use the same units throughout, remember 1 litre = 1000 cm³, and note that equal volumes can have very different surface areas.

Read the full lesson

Lesson 2

Right circular cylinders: curved surface, total surface and volume

Unrolling the curved surface of a cylinder

  1. Cut straight down the side A cut parallel to the axis, from top rim to bottom rim
  2. Open it out flat The curved surface becomes a rectangle
  3. Measure the rectangle Length = circumference of the base = 2πr; width = height h
  4. Area 2πr × h = 2πrh

Right circular cylinder of radius r and height h: curved surface area = 2πrh; total surface area (closed at both ends) = 2πrh + 2πr² = 2πr(h + r); closed at one end only = 2πrh + πr² = πr(2h + r); volume = πr²h.

Pick the right surface area
ObjectSurfaces to countArea formula
Pipe open at both endsCurved surface only2πrh
Glass or tumbler (open top)Curved surface + bottomπr(2h + r)
Closed tinCurved surface + top + bottom2πr(h + r)

Key takeaways: the curved surface of a cylinder unrolls into a rectangle 2πr by h, so CSA = 2πrh. Add one or two circles of area πr² depending on how many ends are closed. Volume = πr²h, base area × height. When a solid is melted and recast, the volume stays the same.

Read the full lesson

Lesson 3

Cones and pyramids

For a right circular cone: l² = h² + r² (Baudhāyana–Pythagoras theorem); curved surface area = πrl; total surface area = πrl + πr² = πr(l + r); volume = ⅓πr²h.

Cylinder and cone with the same r and h

  • Cylinder
    • Curved surface 2πrh
    • Volume πr²h
    • Cross-sections all the same circle
  • Cone
    • Curved surface πrl
    • Volume ⅓πr²h
    • Cross-sections shrink to a point at the top
Three cones of sand fill the cylinder exactly.

Volume of a pyramid = ⅓ × area of base × height (height measured straight up from the base to the apex). Surface area = sum of the areas of all its faces.

Key takeaways: for a cone, first find whichever of r, h, l is missing using l² = h² + r². CSA = πrl comes from the unrolled sector; TSA adds the base πr². A cone's volume is one-third of the cylinder on the same base and height, and any pyramid's volume is ⅓ × base area × height.

Read the full lesson

Lesson 4

Spheres and hemispheres

Sphere of radius r: surface area = 4πr²; volume = (4/3)πr³. Hemisphere: curved surface area = 2πr²; total surface area = 3πr²; volume = (2/3)πr³.

Sphere and hemisphere of radius r

  • Sphere
    • One curved surface, no flat face
    • Surface area 4πr²
    • Volume (4/3)πr³
  • Hemisphere
    • Curved surface 2πr² + flat base πr²
    • Total surface area 3πr²
    • Volume (2/3)πr³
How size changes area and volume
Radius multiplied bySurface area multiplied byVolume multiplied by
248
3927
½¼⅛

Key takeaways: a sphere's surface area is 4πr², the curved area of the cylinder around it, and its volume is (4/3)πr³, two-thirds of that cylinder. A hemisphere has curved area 2πr², total area 3πr² and volume (2/3)πr³. Multiplying the radius by k multiplies area by k² and volume by k³.

Read the full lesson

Lesson 5

Volumes around us: litres, recasting and guesstimates

Volume and capacity
VolumeCapacity
1 cm³1 mL
1000 cm³1 litre
1 m³1000 litres

When a solid is melted and recast, or a liquid is poured from one container to another, the VOLUME stays the same, even though the shape and surface area change.

How to make a guesstimate

  1. Guess first Is the answer in the tens, hundreds, thousands?
  2. Model with shapes Treat objects as cuboids, cylinders, spheres...
  3. State assumptions Sizes, how full, gaps, wastage
  4. Calculate Round numbers sensibly
  5. Reflect Compare with your first guess; which assumption matters most?

Key takeaways: 1 litre = 1000 cm³ and 1 m³ = 1000 litres. Volume is conserved when solids are recast or dropped into water, so set the two volumes equal. For guesstimates, guess first, model with simple shapes, state every assumption, and remember that dividing volumes gives only an upper bound when the pieces leave gaps.

Read the full lesson

Privacy · Terms · Refunds · Delivery