- Foundation
- About 16 min
- 5 practice questions
Friction and Newton's first law of motion
Explain the role of friction in slowing moving objects, identify the forces on an object being pushed, and use Newton's first law and the idea of inertia to explain everyday motion.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why a moving object slows down and stops, and how the force of friction depends on the surfaces.
- Identify the applied force, friction, weight and normal force acting on an object being pushed.
- State Newton's first law, explain inertia, and sketch the graphs for an object with no net force.
Stop pedalling and your bicycle rolls on for a while, then stops. For about two thousand years people thought this showed that a force is needed to keep anything moving. The real reason is a force we hardly notice: friction. Understanding it led Galileo and then Newton to the first law of motion.
The force of friction
Try to push a heavy box resting on the floor. A small push does nothing. The force of friction between the bottom of the box and the floor acts opposite to your push and balances it. Only when your push becomes larger than the friction the floor can supply does a net force act and the box start moving.
Four forces act on a box being pushed across a floor: your applied force forward, friction backward, its weight (gravitational force) downward, and the normal force of the floor upward, at right angles to the surface. The weight and the normal force balance each other, so the box does not sink into the floor or rise. Air also exerts a little friction on moving objects, but for slow objects it is usually small enough to ignore.
Forces on a box pushed across a floor
-
Horizontal
- Applied force: forward
- Friction: backward, opposing motion
-
Vertical
- Weight: downward, the Earth's pull
- Normal force: upward, from the floor
- These two balance each other
The force of friction depends on the nature of the two surfaces. A coin stack flicked by a stretched rubber band slides farther on a polished tiled floor than on a rough cement floor, because friction is smaller on the smooth surface, so the stack slows down more gently. You can compare surfaces by pulling a wooden block with a spring balance: the reading while the block slides at a steady speed is roughly the friction on that surface. The smaller the friction, the farther a sliding object travels before stopping.
Worked example 1: steady speed means balanced forces
Meena pulls a cupboard across a floor at a steady speed. Her spring balance reads 150 N. What is the force of friction? Steady speed in a straight line means the velocity is not changing, so the net force is zero. Friction must therefore be equal and opposite to her pull: 150 N, backward.
What if there were no friction?
Galileo Galilei, in the 17th century, imagined a thought experiment: a ball rolling on a perfectly smooth, level surface with every hindrance to its motion removed. Nothing would slow it, so it would keep moving for ever. So a force is not needed to keep an object moving; a force is needed to change its motion. Isaac Newton built this into his first law, published with his other two laws in 1687.
Newton's first law of motion: an object at rest stays at rest, and an object in motion keeps moving with a constant velocity, unless a net force acts on it.
Constant velocity means the speed and the direction stay the same, so the object moves in a straight line at a steady speed. With zero net force, the acceleration is zero. The tendency of objects to resist a change in their state of rest or of uniform motion is called inertia, which is why the first law is also called the law of inertia.
- When a bus brakes suddenly, standing passengers tip forward: their bodies tend to keep moving.
- When a bus starts suddenly, they tip backward: their bodies tend to stay at rest.
- Flick a card from under a coin placed on a glass; the coin drops into the glass because it tends to stay at rest.
- Dust leaves a carpet when it is beaten: the carpet moves, the dust tends to stay where it was.
Worked example 2: graphs with zero net force
If no net force acts, there are only two possibilities. (i) The object is at rest: its position-time graph is a horizontal line (position does not change) and its velocity-time graph lies along the time axis (velocity zero). (ii) The object moves with constant velocity: its position-time graph is a straight sloping line (equal displacements in equal times) and its velocity-time graph is a horizontal line above the time axis. A curved position-time graph means the velocity is changing, so a net force must be acting.
Worked example 3: does a net force act?
| Situation | Net force? | Reason |
|---|---|---|
| A lift rising at a steady 2 m/s | No | Speed and direction are constant |
| A car going round a bend at a steady 30 km/h | Yes | Its direction is changing, so its velocity is changing |
| A ball rolling to a stop on grass | Yes | It is slowing down; friction is the net force |
| A book lying on a table | No | It stays at rest; weight and normal force balance |
Key takeaways: Friction opposes motion and is what stops moving objects; it is smaller on smoother surfaces. A box being pushed has applied force, friction, weight and normal force acting on it. Newton's first law says that without a net force an object stays at rest or keeps a constant velocity. Inertia is the tendency to resist a change in motion.
Check your understanding
-
1. A box slides across a floor at a constant velocity while being pushed with 40 N. What is the force of friction on it?
- 0 N
- 40 N, opposite to the push
- More than 40 N
- Less than 40 N but not zero
Show answer
Answer: B. Constant velocity means zero acceleration, so by the first law the net force is zero. Friction must exactly balance the push: 40 N in the opposite direction.
-
2. According to Newton's first law, what happens to an object moving on a perfectly frictionless level surface when no net force acts on it?
- It keeps moving with the same velocity
- It slows down gradually
- It stops at once
- It speeds up
Show answer
Answer: A. With no net force there is no acceleration, so the velocity (speed and direction) stays the same and the object keeps moving in a straight line for ever.
-
3. Which situation needs a net force to be acting?
- A train moving at a steady 60 km/h on a straight track
- A parked scooter
- A car turning a corner at a steady speed
- A lift going down at a steady speed
Show answer
Answer: C. Velocity includes direction. A car turning a corner changes direction, so its velocity changes and a net force must act, even if the speed is steady. The other three have constant velocity (or are at rest).
-
4. When a bus brakes suddenly, a standing passenger falls forward. Which idea explains this?
- The passenger gains extra mass
- The bus pushes the passenger forward
- Friction from the floor pulls the passenger forward
- Inertia: the passenger's body tends to keep moving forward
Show answer
Answer: D. The bus slows down, but the upper body of the passenger tends to continue moving forward with its earlier velocity (inertia), so the passenger lurches forward.
-
5. An object's position-time graph is a straight line sloping upward. What can you say about the net force on it?
- It is zero, because the velocity is constant
- It increases with time
- It points backward
- It must be large and forward
Show answer
Answer: A. A straight sloping position-time graph means equal displacements in equal intervals: constant velocity. Constant velocity means no acceleration, so the net force is zero.
Sign in to keep track of the lessons you finish.