Revision notes

Chapter 7 Work, Energy, and Simple Machines: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Work done by a constant force

Work done by a constant force = force × displacement in the direction of the force; W = F × s. The SI unit is the joule (J): 1 J = 1 N × 1 m.

Work done by a force

  • Positive Displacement along the force
    • Lifting a bag up
    • Pushing a cart forward
  • Zero No force, no displacement, or force at right angles to it
    • Pushing a fixed wall
    • Carrying a bag along level ground
  • Negative Displacement opposite to the force
    • Friction on a sliding box
    • Lowering a load slowly (your upward force)

Key takeaways: Work = force × displacement in the direction of the force, measured in joules. No work is done without a displacement along the force. Work is positive when the object moves along the force and negative when it moves against it. The area under a force-displacement graph gives the work.

Read the full lesson

Lesson 2

Energy, the work-energy theorem and kinetic energy

Work-energy theorem: the work done on an object equals the change in its energy. Energy is measured in joules (J), the same unit as work.

Forms of energy and some conversions
FormWhat it isExample of conversion
MechanicalEnergy due to motion or positionWater falling from a height turns a turbine
ThermalEnergy that makes things warm or hotElectric heater: electrical to thermal
LightEnergy that lets us seeBulb or LED: electrical to light
SoundEnergy of vibrations of air or other materialsRinging bell: mechanical to sound
ElectricalEnergy related to charges and their motionSolar panel: light to electrical
ChemicalEnergy stored in the bonds of fuels and foodMuscles: chemical (food) to mechanical
NuclearEnergy stored in the nuclei of atomsNuclear power plant: nuclear to thermal to electrical

W = ½m(v² − u²). Starting from rest (u = 0), the kinetic energy of a mass m moving with speed v is K = ½mv².

Deriving kinetic energy

  1. Work done W = F × s
  2. Second law F = m × a, so W = m × a × s
  3. Equation of motion a × s = (v² − u²) ÷ 2
  4. Result W = ½mv² − ½mu², the change in kinetic energy

Key takeaways: Energy is the capacity to do work, measured in joules. The work done on an object equals the change in its energy. Energy exists in many forms that can change into one another. Kinetic energy is ½mv²; doubling the speed makes it four times as large.

Read the full lesson

Lesson 3

Potential energy and conservation of mechanical energy

Potential energy is the energy stored in an object because of its deformation, or in a system of objects because of their relative positions.

Gravitational potential energy U = m × g × h (valid near the Earth's surface). Unit: joule.

Energy of a falling ball
PositionPotential energy mghKinetic energyTotal
Top (20 m), at rest0.5 × 10 × 20 = 100 J0 J100 J
After falling 5 m (15 m high)0.5 × 10 × 15 = 75 J100 − 75 = 25 J100 J
Just above the ground0 J100 J100 J

Energy in a swinging pendulum

  1. Highest point on one side All potential energy, no kinetic energy; the bob is momentarily at rest.
  2. Lowest point All kinetic energy, least potential energy; fastest.
  3. Highest point on the other side All potential energy again; almost the same height.
  4. Back through the lowest point Potential changes to kinetic once more.

Then back to step 1: Highest point on one side

In real life friction at the support and air resistance slowly turn mechanical energy into heat, so the swings die away.

Key takeaways: Potential energy is stored by deformation or by the positions of interacting objects. Near the Earth, U = mgh, which depends only on height, not path. Without friction, the mechanical energy (kinetic + potential) of an object moving under gravity stays constant, so v = √(2gh) after a fall of height h.

Read the full lesson

Lesson 4

Power: the rate of doing work

Average power = work done ÷ time taken: P = W ÷ t. The SI unit is the watt (W): 1 W = 1 J/s. 1 kilowatt (kW) = 1000 W.

Work and power

  • Work
    • How much energy is transferred
    • W = F × s
    • Unit: joule (J)
    • Same for the stairs whether you walk or run
  • Power
    • How fast energy is transferred
    • P = W ÷ t
    • Unit: watt (W) = J/s
    • Larger when you run up the stairs
The worked examples side by side
TaskWork (J)Time (s)Power (W)
Walking up 6 m (50 kg)300012250
Running up 6 m (50 kg)30006500
Pump lifting 200 kg by 15 m3000060500
Car 0 to 15 m/s (800 kg)90000109000

Key takeaways: Power is the rate of doing work, P = W ÷ t, measured in watts (1 W = 1 J/s) or kilowatts; 1 hp = 746 W. Work can be found from F × s, from mgh or from a change in kinetic energy, and then divided by the time. The same work done faster needs more power.

Read the full lesson

Lesson 5

Simple machines: pulley, inclined plane and lever

Mechanical advantage (MA) = load ÷ effort. An MA greater than 1 means the machine lets a small effort overcome a larger load.

Inclined plane: MA = load ÷ effort = mg ÷ F′ = L ÷ h. A longer, gentler ramp needs less effort but a longer push.

Effort × effort arm = load × load arm. So MA of a lever = load ÷ effort = effort arm ÷ load arm.

Three classes of levers

  • Class I Fulcrum between effort and load
    • Seesaw, beam balance
    • Scissors, pliers, crowbar
  • Class II Load between fulcrum and effort
    • Bottle opener, nutcracker
    • Wheelbarrow, lemon squeezer
    • MA always more than 1
  • Class III Effort between fulcrum and load
    • Tweezers, tongs, broom
    • MA less than 1, but gives speed and control

Key takeaways: Simple machines change the size or direction of a force; MA = load ÷ effort, but the work done is not reduced. A fixed pulley has MA 1 and changes direction; an inclined plane has MA = L ÷ h; a lever balances when effort × effort arm = load × load arm, giving MA = effort arm ÷ load arm. Levers are class I, II or III by what lies in the middle.

Read the full lesson

Privacy · Terms · Refunds · Delivery