• Foundation
  • About 17 min
  • 5 practice questions

Simple machines: pulley, inclined plane and lever

Explain how simple machines make tasks easier without reducing work, and calculate the mechanical advantage of a pulley, an inclined plane and a lever, including the three classes of lever.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define effort, load and mechanical advantage, and explain why a machine cannot reduce the total work.
  • Explain fixed and movable pulleys and find the mechanical advantage of an inclined plane, L ÷ h.
  • Use effort × effort arm = load × load arm for a lever and sort levers into three classes.

Workers load heavy drums onto a truck by rolling them up a sloping plank, a flag is raised by pulling a rope downward, and a stuck lid comes off with the end of a spoon. In each case a simple device makes the job feel easier. These devices are simple machines, and their secret is in how they trade force for distance.

Effort, load and mechanical advantage

A simple machine makes work easier by changing the size or the direction of the force we need to apply. The force we apply is the effort; the force the machine has to overcome (often the weight of an object) is the load.

Mechanical advantage (MA) = load ÷ effort. An MA greater than 1 means the machine lets a small effort overcome a larger load.

A machine never reduces the total work. If the effort is smaller, it must move through a larger distance, so effort × its distance equals load × its distance (ignoring friction). Machines do not create energy; they only help us use it conveniently.

Pulley

A pulley is a wheel with a groove that guides a rope. A fixed pulley at the top of a flagpole or over a well does not reduce the force: load and effort are equal, so its MA is 1. It helps by changing the direction of the effort: pulling down, with your body weight helping, is easier than lifting straight up. A movable pulley, attached to the load, or a system of fixed and movable pulleys, gives an MA greater than 1, which is why cranes and lifts use pulley systems.

Inclined plane

An inclined plane (ramp) helps move a load to a higher level. Pushing a box of weight mg up a smooth ramp of length L to a height h needs a smaller force F′. Work done by you = F′ × L; gain in potential energy = mgh. With no friction, F′ × L = mgh, so:

Inclined plane: MA = load ÷ effort = mg ÷ F′ = L ÷ h. A longer, gentler ramp needs less effort but a longer push.

Worked example 1: loading a drum

A 40 kg drum (load = 40 × 10 = 400 N, taking g = 10 m/s²) is pushed up a smooth plank 2.4 m long to a truck 0.6 m high. MA = L ÷ h = 2.4 ÷ 0.6 = 4. Effort = load ÷ MA = 400 ÷ 4 = 100 N. Check the work: 100 N × 2.4 m = 240 J, and 400 N × 0.6 m = 240 J. Same work, quarter of the force.

Worked example 2: a ramp over a step

A ramp rises 0.5 m over a horizontal distance of 1.2 m. Its sloping length, from the right-angled triangle, is √(0.5² + 1.2²) = √(0.25 + 1.44) = √1.69 = 1.3 m. MA = 1.3 ÷ 0.5 = 2.6. Mountain roads wind round hills in gentle slopes for the same reason: a longer path needs a smaller force from the vehicle.

Lever

A lever is a rigid bar that can turn about a fixed point, the fulcrum. The distance from the fulcrum to the load is the load arm; the distance from the fulcrum to the effort is the effort arm. Experiments with a balance beam show that the beam balances when:

Effort × effort arm = load × load arm. So MA of a lever = load ÷ effort = effort arm ÷ load arm.

Worked example 3: a crowbar

A crowbar lifts a 900 N stone. The effort arm is 1.2 m and the load arm 0.2 m. Effort × 1.2 = 900 × 0.2 = 180, so effort = 180 ÷ 1.2 = 150 N. MA = 900 ÷ 150 = 6, which equals 1.2 ÷ 0.2 = 6.

Worked example 4: balancing a seesaw

A 24 kg child sits 1.5 m from the fulcrum of a seesaw. Where should a 36 kg child sit to balance it? Using masses in place of weights (g cancels): 24 × 1.5 = 36 × L, so 36 = 36 × L and L = 1 m. The heavier child sits closer to the fulcrum.

Three classes of levers

  • Class I Fulcrum between effort and load
    • Seesaw, beam balance
    • Scissors, pliers, crowbar
  • Class II Load between fulcrum and effort
    • Bottle opener, nutcracker
    • Wheelbarrow, lemon squeezer
    • MA always more than 1
  • Class III Effort between fulcrum and load
    • Tweezers, tongs, broom
    • MA less than 1, but gives speed and control

To cut something hard with scissors, you push it close to the pivot: this shortens the load arm, so the same effort gives a larger force on the object. Many machines, such as bicycles and sewing machines, combine several simple machines. No machine can run for ever on its own: friction always turns some energy into heat, so a "perpetual motion machine" is impossible.

Key takeaways: Simple machines change the size or direction of a force; MA = load ÷ effort, but the work done is not reduced. A fixed pulley has MA 1 and changes direction; an inclined plane has MA = L ÷ h; a lever balances when effort × effort arm = load × load arm, giving MA = effort arm ÷ load arm. Levers are class I, II or III by what lies in the middle.

Check your understanding

  1. 1. What is the mechanical advantage of a single fixed pulley used to raise a flag?

    1. 0
    2. 2
    3. 1
    4. Depends on the height of the pole
    Show answer

    Answer: C. With a fixed pulley the effort equals the load, so MA = load ÷ effort = 1. The pulley helps only by changing the direction of the force.

  2. 2. A smooth ramp is 3 m long and rises 0.75 m. What effort is needed to push a 600 N load up it?

    1. 150 N
    2. 450 N
    3. 2400 N
    4. 200 N
    Show answer

    Answer: A. MA = L ÷ h = 3 ÷ 0.75 = 4. Effort = load ÷ MA = 600 ÷ 4 = 150 N. Check: 150 × 3 = 450 J = 600 × 0.75.

  3. 3. In a lever, the effort arm is 90 cm and the load arm is 15 cm. What is its mechanical advantage?

    1. 1/6
    2. 75
    3. 105
    4. 6
    Show answer

    Answer: D. MA of a lever = effort arm ÷ load arm = 90 cm ÷ 15 cm = 6.

  4. 4. In which class of lever does the load lie between the fulcrum and the effort?

    1. Class II, as in a bottle opener
    2. Class I, as in a seesaw
    3. Class III, as in tweezers
    4. None of the classes
    Show answer

    Answer: A. In a class II lever the load is in the middle. In a bottle opener the fulcrum is the edge resting on top of the cap, the load is where it grips under the cap, and the effort is at the handle end.

  5. 5. Which statement about simple machines is correct?

    1. They reduce the total work needed for a task
    2. They make a task easier by changing the size or direction of the force, but do not reduce the total work
    3. They create energy
    4. They always have a mechanical advantage less than 1
    Show answer

    Answer: B. A smaller effort must move through a larger distance, so effort × distance stays equal to load × distance (ignoring friction). Machines do not reduce work or create energy; they make the force more convenient.

Privacy · Terms · Refunds · Delivery