- Foundation
- About 16 min
- 5 practice questions
Waves and tides: the moving surface of the sea
Describe the parts of a wave, explain how waves shape coasts and what a tsunami is, and explain how spring and neap tides form and why tides matter for ports, fishing and energy.
If something looks wrong, please tell us.
By the end of this lesson you can
- Name the parts of a wave and explain how waves create coastal landforms.
- Explain high and low tides, and why spring tides and neap tides occur.
- Give examples of how tides affect navigation, fishing and energy in India.
Ocean water is never still. Waves, tides and currents are more than movements of water: they shape coasts, carry nutrients for marine life, help or hinder fishing and shipping, and even affect climate. This lesson covers the two movements you can watch from a beach: waves and tides.
Waves
A wave is the alternate rise and fall of the ocean surface. Most waves are made by wind blowing across the water, and they carry energy across the ocean over long distances. The high point of a wave is the crest and the low point is the trough. The vertical distance from trough to crest is the wave height. The horizontal distance between two crests (or two troughs) one after another is the wavelength. The time a crest takes to travel from one point to the next crest position is the wave period, and the number of crests passing a point each second is the wave frequency.
Waves as coastal architects
Waves are often called coastal architects because they shape the shoreline by eroding rock and moving sediment. Where a headland of rock juts into the sea, waves attack its weak points. The force of the water (hydraulic action) widens a crack; rubbing by sand and pebbles (abrasion) enlarges it into a sea cave. Air and water forced up through the roof can form a blowhole. When waves cut through the back of the cave, a sea arch forms. The arch roof eventually collapses, leaving a tall pillar called a sea stack, which is slowly worn down to a low stump. Waves also deposit sand and pebbles to build beaches.
How waves wear away a headland
- Crack Hydraulic action opens a weakness in the rock.
- Sea cave Hydraulic action and abrasion widen the crack.
- Sea arch The back of the cave is eroded through.
- Sea stack The arch roof collapses, leaving a pillar.
- Stump The stack is weathered down to a low stump.
Storms can whip up huge waves that damage coasts. Even more destructive are tsunamis, giant waves caused mainly by undersea earthquakes. When a tsunami reaches land, the greatest height the water climbs above sea level is called its run-up height; the textbook notes this can reach about 30 metres, or more in extreme cases.
Tides
Tides are the rhythmic rise and fall of sea level, which happens twice a day in most parts of the world. When the water rises to its highest level and covers much of the shore, it is high tide (flood tide). When it falls to its lowest level and retreats, it is low tide (ebb tide). Tides are caused mainly by the gravitational pull of the Moon and the Sun, which makes the ocean bulge on opposite sides of the Earth.
Spring tides and neap tides
-
Spring tides
- Sun, Earth and Moon in a straight line
- Full moon and new moon days
- Pulls of Sun and Moon add together
- Highest high tides and lowest low tides
-
Neap tides
- Sun and Moon at right angles as seen from Earth
- First-quarter and third-quarter moon
- Pulls act in different directions
- Smallest difference between high and low tide
Spring tide: Sun, Earth and Moon in line (new or full moon), so the tidal range is greatest. Neap tide: Sun and Moon at right angles (quarter moons), so the tidal range is smallest.
Why tides matter
- Navigation: high tide raises water near the shore, so ships can enter harbours more easily. Before berthing, a ship checks water depth and tidal range. According to the textbook, tidal ranges in some ports reach 4-5 metres, and the Gulf of Khambhat has one of the highest, about 12 metres.
- Shallow straits: in shallow channels such as the Singapore Strait, very large oil tankers may wait for high tide so they do not run aground.
- Tidal currents: water rushing in and out of coastal areas creates strong currents, which the textbook puts at 5-6 knots (about 9-11 km/h).
- Fishing: at high tide many fish move closer to the shore for food and shelter, which helps coastal fishing communities.
- Energy: the rise and fall of water can turn turbines. Tidal energy is not yet used widely in India, but the Gulf of Kutch, the Gulf of Khambhat and the Sundarbans are identified as major possible sites.
Tides also shape daily life in surprising ways. The textbook describes the Bhadkeshwar Mahadev Temple at Dwarka in Gujarat, which stands on a small hillock in the Arabian Sea: its stone path is under water at high tide, so visitors can walk to it only at low tide.
Worked example 1: predicting the tide type
Question: A calendar shows a full moon on the 14th and a first-quarter moon on the 7th. On which date should a harbour master expect the bigger difference between high and low water? Reasoning: At full moon the Sun, Earth and Moon are in a line, so their pulls combine and produce spring tides. At first quarter they act at right angles, giving neap tides with a small range. Answer: around the 14th (spring tide).
Worked example 2: reading a wave diagram
Question: In a sketch, two neighbouring crests are 40 metres apart and the crest stands 2 metres above the trough (made-up values for practice). Name the two measurements. Reasoning: The horizontal gap between two crests in a row is the wavelength; the vertical gap from trough to crest is the wave height. Answer: wavelength = 40 m; wave height = 2 m.
Key takeaways: Waves are mostly wind-driven rises and falls of the surface that carry energy and shape coasts into caves, arches, stacks and stumps, and build beaches. Tsunamis are giant waves caused mainly by undersea earthquakes. Tides rise and fall twice a day because of the pull of the Moon and the Sun; spring tides (new and full moon) have the largest range and neap tides (quarter moons) the smallest. Tides matter for ports, fishing and tidal energy.
Check your understanding
-
1. What is the main cause of ordinary waves on the ocean surface?
- The rotation of the Earth
- Wind blowing across the water
- The pull of the Sun alone
- Differences in salinity
Show answer
Answer: B. Ordinary waves are made mainly by wind transferring energy to the water surface. The Moon and Sun cause tides, and salinity differences help drive currents.
-
2. Arrange the coastal features in the order in which waves create them from a headland: sea arch, crack, stump, sea cave, sea stack.
- Sea cave, crack, sea arch, stump, sea stack
- Crack, sea arch, sea cave, sea stack, stump
- Crack, sea cave, sea arch, sea stack, stump
- Sea arch, sea cave, crack, stump, sea stack
Show answer
Answer: C. A crack is widened into a cave; the cave is cut through to make an arch; the arch roof falls, leaving a stack; the stack wears down to a stump.
-
3. Spring tides occur when:
- the Sun, the Earth and the Moon are in a straight line
- the Moon is in its first-quarter phase
- the Sun and the Moon pull at right angles
- only during the spring season
Show answer
Answer: A. Spring tides happen at new moon and full moon, when the three bodies are aligned and the pulls combine. The name has nothing to do with the season. Quarter moons give neap tides.
-
4. Case: A very large crude carrier must pass through a shallow sea channel. Its captain waits several hours before entering. What is the most likely reason?
- To wait for low tide, when currents stop
- To wait for a spring tide that happens every hour
- To wait for the wind to create waves
- To wait for high tide, so there is enough water depth
Show answer
Answer: D. High tide raises the water level, giving a deep-draught ship enough depth to pass without running aground. The textbook gives the Singapore Strait as an example of such a channel.
-
5. Assertion (A): The Gulf of Khambhat is considered a suitable site for tidal energy. Reason (R): It has one of the highest tidal ranges in India, so large volumes of water move in and out.
- A is true, but R is false.
- Both A and R are true, and R correctly explains A.
- Both A and R are true, but R does not explain A.
- A is false, but R is true.
Show answer
Answer: B. Tidal power depends on a large rise and fall of water. The Gulf of Khambhat's very high tidal range (about 12 metres, according to the textbook) is exactly why it is a good site, so R explains A.
Sign in to keep track of the lessons you finish.