• Practice
  • About 14 min
  • 5 practice questions

Connection speeds and data units: calculations and choosing a connection

Solve download-time and data-use problems quickly, connect to Wi-Fi and share a phone's data step by step, and pick the right connection for a situation.

If something looks wrong, please tell us.

Speed questions look technical but use one idea: convert bytes to bits. This lesson gives a three-line method for every speed problem, practises it, and then covers the practical side - joining a Wi-Fi network and sharing your phone's data.

Units

Data units (binary convention for storage)
UnitEquals
1 byte (B)8 bits (b)
1 KB (kilobyte)1,024 bytes
1 MB (megabyte)1,024 KB
1 GB (gigabyte)1,024 MB
1 Mbps1 million bits per second

A small b means bits and a capital B means bytes. Speeds use bits (Mbps); file sizes use bytes (MB). In speed calculations, treat 1 MB as 8 megabits.

The three-line method

  1. Convert the file size to megabits: megabytes × 8.
  2. Time in seconds = megabits ÷ speed in Mbps.
  3. Change seconds into minutes if needed (÷ 60).

The same method runs backwards. Speed needed = megabits ÷ seconds. Data used = speed × seconds ÷ 8 (gives megabytes).

Worked example 1: a film download

A 1.5 GB film is downloaded at 12 Mbps. Take 1 GB = 1,024 MB. Working: 1.5 × 1,024 = 1,536 MB. In megabits: 1,536 × 8 = 12,288. Time = 12,288 ÷ 12 = 1,024 seconds = 17 minutes 4 seconds.

Worked example 2: data used by a video call

A two-hour online class streams at an average 1 Mbps. How much data does it use? Working: 2 hours = 7,200 seconds. Bits = 1 × 7,200 = 7,200 megabits. Bytes = 7,200 ÷ 8 = 900 MB. So a 1 GB daily data pack would only just cover it.

Worked example 3: speed needed

You must upload a 30 MB scanned file in 1 minute. What upload speed do you need? Working: 30 × 8 = 240 megabits; 240 ÷ 60 = 4 Mbps. Note it is the upload speed that matters, which is often lower than the download speed on home plans.

Step-by-step: join a Wi-Fi network on Windows

  1. Click the network (Wi-Fi) icon at the right end of the taskbar.
  2. Choose the network name (SSID) from the list (on Windows 11, first click the arrow beside the Wi-Fi button to see the list).
  3. Tick Connect automatically if it is a network you trust, then click Connect.
  4. Type the Wi-Fi password (security key) and confirm.
  5. Open a website to check the connection works.

Step-by-step: share a phone's mobile data (hotspot)

  1. Open Settings on the phone and find the hotspot or tethering section (the exact menu name varies between phones).
  2. Set a network name and a strong password.
  3. Switch the hotspot on.
  4. On the laptop, join that network as you would any Wi-Fi network.
  5. Switch the hotspot off when finished; it uses your mobile data and battery.

Choosing a connection

NeedBest fitWhy
Fast, stable home internet for several usersFibre broadband with Wi-FiHighest speed and stability
Internet while travellingMobile dataWorks anywhere with signal
Remote area with no cable or towerSatelliteNeeds only a clear view of the sky
Laptop online for an hour, no Wi-Fi nearbyPhone hotspotShares mobile data
Video calls and online gamesLow-latency wired or fibre lineDelay matters more than raw speed

Megabytes × 8 = megabits. Megabits ÷ Mbps = seconds. Speed × seconds ÷ 8 = megabytes used.

Key takeaways: always multiply bytes by 8 before dividing by a speed in Mbps. Work backwards for speed needed or data used. Joining Wi-Fi needs the network name and its password; a phone hotspot shares mobile data. Choose a connection by speed, stability, place and delay.

Check your understanding

  1. 1. A 120 MB file downloads at 16 Mbps. Ignoring delays, how long does it take?

    1. 7.5 seconds
    2. 60 seconds
    3. 120 seconds
    4. 30 seconds
    Show answer

    Answer: B. 120 × 8 = 960 megabits. 960 ÷ 16 = 60 seconds. The figure 7.5 comes from forgetting to multiply by 8.

  2. 2. A 30-minute video call averages 2 Mbps. How much data does it use?

    1. 450 MB
    2. 60 MB
    3. 3,600 MB
    4. 900 MB
    Show answer

    Answer: A. 30 minutes = 1,800 seconds. 2 × 1,800 = 3,600 megabits. 3,600 ÷ 8 = 450 MB.

  3. 3. To upload a 45 MB file in 30 seconds, the upload speed needed is:

    1. 1.5 Mbps
    2. 6 Mbps
    3. 12 Mbps
    4. 24 Mbps
    Show answer

    Answer: C. 45 × 8 = 360 megabits. 360 ÷ 30 = 12 Mbps.

  4. 4. Which unit is normally used to state an internet connection's speed?

    1. MB
    2. GB
    3. KB
    4. Mbps
    Show answer

    Answer: D. Speed is data per second, stated in bits per second such as Mbps. MB, GB and KB are units of stored size.

  5. 5. For video calls and online games, which property of a connection matters most besides speed?

    1. Low latency (delay)
    2. Screen size
    3. Hard disk space
    4. Number of browser tabs
    Show answer

    Answer: A. Latency is the delay before data arrives. High latency makes calls lag even on a fast line.

Privacy · Terms · Refunds · Delivery