- Practice
- About 14 min
- 5 practice questions
Rainwater harvesting and groundwater: working the numbers
Calculate how much roof rain water can be collected and use the simple rule that 1 mm of rain on 1 square metre is 1 litre.
If something looks wrong, please tell us.
Rainwater harvesting is both a conservation idea and a calculation. The calculation is easy once you know one fact, and it is a favourite of quantitative questions. All numbers in this lesson are illustrations to practise the method; they are not official figures for any place.
The rule to remember
One millimetre of rain falling on one square metre of surface is one litre of water. So the water falling on a roof is roof area in square metres x rainfall in millimetres, in litres. Not all of it can be collected, because some splashes, evaporates or leaks. A runoff coefficient (for example 0.8) tells you what fraction is collected: collected water = area x rainfall x coefficient.
Steps of a harvesting calculation
- Area Roof area in square metres
- Rainfall In millimetres
- Multiply Area x rainfall gives litres
- Apply coefficient Multiply by 0.8, or the one given
- Convert 1000 litres = 1 cubic metre
Worked examples
Example 1. A roof of 60 square metres receives 500 mm of rain in a season (illustration). Working: 60 x 500 = 30,000 litres. Answer: 30,000 litres.
Example 2. The same roof, with a runoff coefficient of 0.8. Working: 30,000 x 0.8 = 24,000 litres. In cubic metres, 24,000 / 1000 = 24. Answer: 24,000 litres, or 24 cubic metres.
Example 3. A family of 5 uses 100 litres each a day for drinking and cooking-type needs (illustration). How many days would 24,000 litres last? Working: daily use = 5 x 100 = 500 litres; 24,000 / 500 = 48. Answer: 48 days.
Example 4. A catchment loses storage to silt: a reservoir starts at a capacity of 200 units and silt takes 4 units a year (illustration). Working: after 10 years, silt = 4 x 10 = 40 units; 200 - 40 = 160. As a percentage lost: 40 / 200 x 100 = 20%. Answer: 160 units, a 20% loss.
| Quantity | Formula | Unit |
|---|---|---|
| Water falling on a roof | Area x rainfall | Litres (m2 x mm) |
| Water collected | Area x rainfall x coefficient | Litres |
| Litres to cubic metres | Divide by 1000 | m3 |
| Days supply lasts | Stored litres / daily use | Days |
Groundwater balance in words
If inflow to an aquifer (recharge) is greater than outflow (pumping and natural drainage), the water table rises. If outflow is greater, it falls. Questions often give two numbers and ask which way the table moves.
Common calculation mistakes
- Forgetting to multiply by the coefficient when the question gives one.
- Dividing by 100 instead of 1000 when changing litres to cubic metres.
- Mixing metres and millimetres: rainfall is given in millimetres, so do not convert it to metres unless you also change the rule.
- Using the wrong number of people or days in a supply question.
Example 5. A roof of 25 square metres with 600 mm of rain and a coefficient of 0.9 (illustration). Working: 25 x 600 = 15,000; 15,000 x 0.9 = 13,500 litres, which is 13.5 cubic metres. Answer: 13,500 litres.
Example 6. Question: 'A water tank of 10 cubic metres is to be filled from a roof that yields 4,000 litres in a shower (illustration). How many such showers fill it?' Working: 10 cubic metres = 10,000 litres; 10,000 / 4,000 = 2.5. Answer: 2.5 showers, so three showers are needed to fill it completely.
Litres collected = roof area (m2) x rainfall (mm) x runoff coefficient. Divide by 1000 for cubic metres.
Key takeaways: 1 mm of rain on 1 square metre equals 1 litre. Multiply by the coefficient for what you can collect. Recharge greater than pumping raises the water table; pumping greater than recharge lowers it.
Check your understanding
-
1. How many litres fall on a 40 m2 roof in 300 mm of rain?
- 120,000 litres
- 1,200 litres
- 340 litres
- 12,000 litres
Show answer
Answer: D. 40 x 300 = 12,000 litres.
-
2. With a coefficient of 0.5, how much of 12,000 litres is collected?
- 6,000 litres
- 24,000 litres
- 600 litres
- 5,000 litres
Show answer
Answer: A. 12,000 x 0.5 = 6,000 litres.
-
3. 24,000 litres equals how many cubic metres?
- 2.4
- 24
- 240
- 2,400
Show answer
Answer: B. Divide litres by 1000: 24,000 / 1000 = 24.
-
4. If pumping exceeds recharge, the water table
- does not change ever
- rises
- falls
- turns into a lake
Show answer
Answer: C. Outflow greater than inflow lowers it.
-
5. A tank holds 6,000 litres and a house uses 300 litres a day. For how many days will it last?
- 2 days
- 18 days
- 200 days
- 20 days
Show answer
Answer: D. 6,000 / 300 = 20.
Sign in to keep track of the lessons you finish.