- Advanced
- About 16 min
- 5 practice questions
Acids, bases and salts at home: antacids, baking soda and plaster
Compare antacids by the acid each gram neutralises, use the pH scale as a ratio scale, and do the mass arithmetic for baking soda, washing soda and plaster of Paris.
If something looks wrong, please tell us.
Most daily-life chemistry questions at the advanced level hide a small calculation inside a familiar object: an antacid tablet, a packet of baking soda, a bag of plaster. If you know the reaction and two or three molar masses, the question becomes arithmetic. This lesson revises the household acids, bases and salts and then drills the calculations that examiners build on them. Throughout, use H = 1, C = 12, O = 16, Na = 23, Mg = 24, Al = 27, S = 32, Cl = 35.5 and Ca = 40.
The pH scale is a ratio scale
pH measures hydrogen-ion concentration on a logarithmic scale: pH = −log[H+]. Each step of one pH unit is a factor of 10 in [H+]. A solution of pH 3 is not 'a little' more acidic than one of pH 5; it has 10 × 10 = 100 times the hydrogen-ion concentration. For a strong acid such as hydrochloric acid, which ionises completely, 0.01 mol/L HCl has [H+] = 10^−2 mol/L and so pH 2. Neutral water at room temperature is pH 7, acids are below 7 and bases above.
- Gastric juice contains hydrochloric acid; too much of it causes acidity and indigestion, which antacids relieve.
- Tooth enamel starts to be attacked when the pH in the mouth falls below about 5.5, which is why toothpastes are mildly basic.
- Ant, bee and nettle stings inject methanoic (formic) acid; a mild base such as baking soda solution relieves the pain.
Antacids: which base, and how much acid per gram
An antacid is a weak base that neutralises excess HCl in the stomach. Sodium hydrogencarbonate works fast but, taken in excess, makes the stomach alkaline and triggers even more acid secretion. Insoluble metal hydroxides such as magnesium hydroxide and aluminium hydroxide are preferred because they do not dissolve to make the contents strongly alkaline. The equations fix how many moles of acid each base can take: NaHCO3 + HCl → NaCl + H2O + CO2; Mg(OH)2 + 2HCl → MgCl2 + 2H2O; Al(OH)3 + 3HCl → AlCl3 + 3H2O; CaCO3 + 2HCl → CaCl2 + H2O + CO2.
| Antacid | Molar mass (g/mol) | Mol HCl per mol | Mol HCl per gram |
|---|---|---|---|
| NaHCO3 | 84 | 1 | 1/84 = 0.0119 |
| Mg(OH)2 | 58 | 2 | 2/58 = 0.0345 |
| Al(OH)3 | 78 | 3 | 3/78 = 0.0385 |
| CaCO3 | 100 | 2 | 2/100 = 0.0200 |
Worked example 1: one tablet, two bases
A tablet contains 0.58 g of Mg(OH)2 and 0.39 g of Al(OH)3. How many moles of HCl can it neutralise? Moles of Mg(OH)2 = 0.58 ÷ 58 = 0.010 mol, and each mole takes 2 mol HCl, so 0.020 mol. Moles of Al(OH)3 = 0.39 ÷ 78 = 0.005 mol, and each takes 3 mol HCl, so 0.015 mol. Total = 0.020 + 0.015 = 0.035 mol of HCl. The same 0.97 g of NaHCO3 alone would neutralise only 0.97 ÷ 84 ≈ 0.0115 mol, about a third as much.
Baking soda, washing soda, bleaching powder and plaster
Baking soda is sodium hydrogencarbonate, NaHCO3. On heating, 2NaHCO3 → Na2CO3 + H2O + CO2, and the carbon dioxide makes dough rise. Baking powder is baking soda mixed with a mild edible acid such as tartaric acid, so the gas is released even without strong heating and no bitter sodium carbonate is left behind. Washing soda is Na2CO3·10H2O; it softens water and is used in glass and soap making. Bleaching powder, written CaOCl2, is made by passing chlorine over dry slaked lime: Ca(OH)2 + Cl2 → CaOCl2 + H2O. Plaster of Paris is CaSO4·½H2O, made by heating gypsum, CaSO4·2H2O, to about 373 K; when mixed with water it sets back into hard gypsum.
Worked example 2: heating baking soda
8.4 g of NaHCO3 is heated until the reaction is complete. Moles = 8.4 ÷ 84 = 0.10 mol. From 2NaHCO3 → Na2CO3 + H2O + CO2, this gives 0.05 mol of each product. Residue Na2CO3 = 0.05 × 106 = 5.3 g. Gases lost: CO2 = 0.05 × 44 = 2.2 g and water = 0.05 × 18 = 0.9 g. Check: 5.3 + 2.2 + 0.9 = 8.4 g, so mass is conserved. The mass falls by 3.1 g, which is 3.1 ÷ 8.4 ≈ 36.9% of the start.
Worked example 3: water of crystallisation
What percentage of washing-soda crystals is water? Na2CO3·10H2O = 106 + 10 × 18 = 286 g/mol, of which water is 180 g. Percentage = 180 ÷ 286 × 100 ≈ 62.9%. For gypsum to plaster of Paris: CaSO4·2H2O (172 g/mol) → CaSO4·½H2O (145 g/mol) + 1½H2O. Each 172 g loses 27 g of water, a loss of 27 ÷ 172 ≈ 15.7%. Going back, 145 g of plaster needs 27 g of water to set.
Moles of acid neutralised = moles of base × number of OH− (or acid-taking groups) per formula. One pH unit = a factor of 10 in [H+].
Key takeaways: treat pH as powers of ten; compare antacids per gram, not per mole, where aluminium hydroxide leads; write the decomposition of baking soda with a 2 in front; remember the three hydrates (washing soda 10, gypsum 2, plaster ½) and use their molar masses 286, 172 and 145.
Check your understanding
-
1. Gram for gram, which of these antacids neutralises the most hydrochloric acid?
- NaHCO3
- Mg(OH)2
- Al(OH)3
- CaCO3
Show answer
Answer: C. Moles of HCl per gram: NaHCO3 1/84 = 0.0119; Mg(OH)2 2/58 = 0.0345; Al(OH)3 3/78 = 0.0385; CaCO3 2/100 = 0.020. Al(OH)3 is highest.
-
2. By what factor is the hydrogen-ion concentration of a pH 2 solution greater than that of a pH 5 solution?
- 1000 times
- 3 times
- 100 times
- 2.5 times
Show answer
Answer: A. The difference is 3 pH units. Each unit is a factor of 10, so 10 × 10 × 10 = 1000.
-
3. 16.8 g of sodium hydrogencarbonate is heated to constant mass. What is the mass of the solid left?
- 8.4 g
- 10.6 g
- 12.4 g
- 5.3 g
Show answer
Answer: B. 16.8 ÷ 84 = 0.2 mol NaHCO3. 2NaHCO3 → Na2CO3 + H2O + CO2 gives 0.1 mol Na2CO3 = 0.1 × 106 = 10.6 g.
-
4. Bleaching powder is made by passing chlorine over which substance?
- Limestone, CaCO3
- Gypsum, CaSO4·2H2O
- Washing soda, Na2CO3·10H2O
- Dry slaked lime, Ca(OH)2
Show answer
Answer: D. Ca(OH)2 + Cl2 → CaOCl2 + H2O. Chlorine is passed over dry slaked lime.
-
5. How much water is needed to convert 290 g of plaster of Paris completely into gypsum?
- 27 g
- 36 g
- 54 g
- 18 g
Show answer
Answer: C. CaSO4·½H2O = 145 g/mol, so 290 g = 2 mol. Each mole takes 1½ mol water to become CaSO4·2H2O: 2 × 1.5 = 3 mol = 3 × 18 = 54 g.
Sign in to keep track of the lessons you finish.