• Foundation
  • About 14 min
  • 5 practice questions

Fuels, calorific value and cooking gas

Compare solid, liquid and gaseous fuels, understand calorific value, and use it to work out how much fuel is needed to heat water.

If something looks wrong, please tell us.

Every kitchen, vehicle and factory runs on fuels. A fuel is a substance that burns in air to give heat, and sometimes light. When we choose a fuel for a purpose, we think about how much heat it gives, how easy it is to store and carry, and what it does to the air.

Kinds of fuel

Fuels by state
TypeExamplesNotes
SolidWood, charcoal, coal, dung cakesCheap and easy to find; smoke and ash
LiquidKerosene, petrol, dieselEasy to carry; used in engines
GaseousLPG, natural gas, biogasBurn cleanly; need careful storage

LPG (liquefied petroleum gas) is mainly propane and butane stored under pressure as a liquid in a cylinder. LPG has no smell by itself, so a strong-smelling chemical (a mercaptan, such as ethanethiol) is added so that a leak can be noticed. Biogas is made when bacteria break down cattle dung and plant waste without air. Its main part is methane, which burns well. Natural gas is also mostly methane.

Calorific value

The calorific value of a fuel is the amount of heat produced when 1 kg of it burns completely. It is measured in kilojoules per kilogram (kJ/kg). A fuel with a higher calorific value gives more heat for the same mass.

A good fuel is cheap, easy to store, burns without smoke or poisonous products, and has a high calorific value.

— Rule to remember

Worked example 1: comparing fuels. Suppose fuel A has a calorific value of 40,000 kJ/kg and fuel B has 20,000 kJ/kg (illustrative numbers, not real data). Burning 0.5 kg of A gives 0.5 x 40,000 = 20,000 kJ. To get the same heat from B, we need 20,000 / 20,000 = 1.0 kg. So, for the same heating job, we need twice the mass of B.

Worked example 2: heating water. How much heat is needed to raise 2.0 kg of water from 25 degrees C to 75 degrees C? The specific heat capacity of water is 4.18 J per gram per degree. Working: mass = 2000 g, rise = 50 degrees, heat = 2000 x 4.18 x 50 = 418,000 J = 418 kJ. If fuel A (40,000 kJ/kg) burned with no loss, the mass needed would be 418 / 40,000 = 0.01045 kg, about 10.5 g.

Worked example 3: real stoves waste heat. In practice, much of the heat escapes into the air. Suppose only 40 per cent of the heat reaches the water. The fuel needed becomes 10.45 g / 0.40 = about 26.1 g, which is 2.5 times as much. A stove with a better design or a lid on the pan reduces the fuel used.

Safety and the environment

  • Keep the room ventilated when burning any fuel. Poor ventilation can let carbon monoxide build up, and this gas is poisonous.
  • If you smell gas, do not light a flame or switch on electrical devices. Open the windows and turn off the regulator.
  • Burning fuels releases carbon dioxide, which adds to global warming, and smoke from solid fuels harms the lungs.
  • Cleaner fuels such as LPG and biogas give less smoke than wood or dung cakes.

Key takeaways: fuels may be solid, liquid or gaseous; calorific value is heat per kilogram; heat needed for water is mass x 4.18 x temperature rise; the more heat is wasted, the more fuel is needed; always ventilate.

Check your understanding

  1. 1. What is the calorific value of a fuel?

    1. The heat produced when 1 kg burns completely
    2. The price of 1 kg of the fuel
    3. The temperature at which it catches fire
    4. The smoke produced by 1 kg
    Show answer

    Answer: A. Calorific value is the heat given out when 1 kg of the fuel burns completely, usually in kJ/kg.

  2. 2. Which of these is the main component of biogas?

    1. Propane
    2. Carbon dioxide
    3. Methane
    4. Hydrogen sulphide
    Show answer

    Answer: C. Biogas is mainly methane, produced by bacteria acting on dung and plant waste.

  3. 3. Why is a strong-smelling chemical added to LPG?

    1. To make it burn faster
    2. So that leaks can be detected
    3. To increase its calorific value
    4. To make it liquid
    Show answer

    Answer: B. LPG has almost no smell, so a smelly chemical is added so that people notice a leak.

  4. 4. Fuel P gives 30,000 kJ/kg. How much heat is released by 0.2 kg of it?

    1. 6,000 kJ
    2. 150,000 kJ
    3. 600 kJ
    4. 60,000 kJ
    Show answer

    Answer: A. Heat = 0.2 x 30,000 = 6,000 kJ.

  5. 5. How much heat is needed to warm 1000 g of water by 10 degrees C (specific heat capacity 4.18 J/g/degree)?

    1. 4,180 J
    2. 1,000 J
    3. 418 J
    4. 41,800 J
    Show answer

    Answer: D. Heat = 1000 x 4.18 x 10 = 41,800 J.

Privacy · Terms · Refunds · Delivery