- Advanced
- About 17 min
- 5 practice questions
Combustion audits: oxygen, air and SO₂ scrubbing
Work out the oxygen and air needed to burn a fuel of known composition, and the limestone used and gypsum formed when its SO₂ is scrubbed.
If something looks wrong, please tell us.
Advanced problems rarely ask for one product from one element. They give a fuel analysis with carbon, hydrogen and sulfur, ask for the oxygen or air needed, and then ask what happens when the sulfur dioxide is removed from the flue gas. Each step is ordinary stoichiometry, but the chain is long and option lists are built from the mistakes students make along the way. This lesson gives a per-kilogram toolkit that makes these chains quick and safe.
Oxygen demand per kilogram of element
From C + O₂ → CO₂, 12 kg of carbon needs 32 kg of oxygen: 8/3 kg O₂ per kg C. From 2H₂ + O₂ → 2H₂O, 4 kg of hydrogen needs 32 kg of oxygen: 8 kg O₂ per kg H, and it forms 9 kg of water. From S + O₂ → SO₂, 32 kg of sulfur needs 32 kg of oxygen: 1 kg O₂ per kg S. If the fuel itself contains oxygen, subtract it from the demand, because it is already available.
Air is about 23% oxygen by mass (about 21% by volume). So the mass of air needed = oxygen needed ÷ 0.23. Furnaces are run with some excess air to make sure combustion is complete; excess air of 20% means multiplying the theoretical air by 1.2.
Removing SO₂: limestone scrubbing
Flue gas can be passed through a slurry of limestone, which captures SO₂ and, with oxygen, forms calcium sulfate. The overall change is CaCO₃ + SO₂ + ½O₂ → CaSO₄ + CO₂, and the solid is usually recovered as gypsum, CaSO₄·2H₂O (molar mass 172). Per mole of sulfur captured: one mole of CaCO₃ (100 g) used, one mole of gypsum (172 g) formed, one mole of CO₂ (44 g) released. Note the trade-off: the scrubber itself releases some CO₂.
| Per kg of sulfur captured | Mass | From |
|---|---|---|
| SO₂ formed | 2 kg | 64/32 |
| CaCO₃ used | 3.125 kg | 100/32 |
| Gypsum formed | 5.375 kg | 172/32 |
| CO₂ released by scrubbing | 1.375 kg | 44/32 |
Worked example 1: oxygen and air for a coal
1000 kg of coal contains 84% C, 4% H and 2% S; the rest is ash. Find the theoretical oxygen and air (23% O₂ by mass). Carbon 840 kg needs 840 × 8/3 = 2240 kg O₂. Hydrogen 40 kg needs 40 × 8 = 320 kg O₂. Sulfur 20 kg needs 20 kg O₂. Total O₂ = 2240 + 320 + 20 = 2580 kg. Air = 2580 ÷ 0.23 ≈ 11,217 kg, about 11.2 tonnes: more than eleven times the mass of the coal. With 20% excess air, about 13.5 tonnes.
Worked example 2: scrubbing the same coal
The 20 kg of sulfur gives 40 kg of SO₂, which is 40,000 ÷ 64 = 625 mol. If all of it is captured: CaCO₃ = 625 × 100 g = 62.5 kg; gypsum = 625 × 172 g = 107.5 kg; CO₂ from the scrubber = 625 × 44 g = 27.5 kg. If the scrubber captures only 90%, multiply each by 0.9: CaCO₃ = 56.25 kg, gypsum = 96.75 kg. Check with the table: 20 kg S × 3.125 = 62.5 kg CaCO₃.
Worked example 3: water from hydrogen
How much water vapour does the coal above release? Hydrogen 40 kg × 9 = 360 kg of water. A common wrong option is 320 kg, which is the oxygen used, and another is 720 kg, from doubling the water by mistake. Always check which quantity the question names.
Shortcut and trap summary
Work per kilogram of each element and add. Convert percentages to masses first. Watch for anhydrous CaSO₄ (136) versus gypsum (172) in options, for oxygen versus air, and for whether the scrubber efficiency has been applied. If the fuel contains oxygen, the net demand is reduced by that oxygen.
O₂ per kg: C 8/3, H 8, S 1. Air = O₂ ÷ 0.23 by mass. Per kg S scrubbed: 3.125 kg CaCO₃, 5.375 kg gypsum, 1.375 kg CO₂.
- Add element-by-element oxygen demands; subtract any oxygen already in the fuel.
- Theoretical air is more than ten times the mass of a typical coal.
- Scrubbing: one CaCO₃ per SO₂, forming CaSO₄·2H₂O and releasing CO₂.
- Apply capture efficiency at the end.
Check your understanding
-
1. 100 kg of fuel contains 72% C, 4% H and 1.6% S. What mass of oxygen is needed for complete combustion?
- 225.6 kg
- 192 kg
- 257.6 kg
- 224 kg
Show answer
Answer: A. C: 72 × 8/3 = 192 kg. H: 4 × 8 = 32 kg. S: 1.6 kg. Total = 225.6 kg.
-
2. How much air (23% oxygen by mass) supplies 46 kg of oxygen?
- 10.6 kg
- 200 kg
- 230 kg
- 46 kg
Show answer
Answer: B. Air = 46 ÷ 0.23 = 200 kg.
-
3. SO₂ from burning 6.4 kg of sulfur is fully captured with limestone. What mass of CaCO₃ is used?
- 6.4 kg
- 12.8 kg
- 20 kg
- 34.4 kg
Show answer
Answer: C. 6.4 kg S = 0.2 kmol; one CaCO₃ per S, so 0.2 × 100 = 20 kg. (Or 6.4 × 3.125 = 20.)
-
4. SO₂ from 3.2 kg of sulfur is captured and recovered as gypsum, CaSO₄·2H₂O. What mass of gypsum forms?
- 13.6 kg
- 32 kg
- 10 kg
- 17.2 kg
Show answer
Answer: D. 3.2 kg S = 0.1 kmol, giving 0.1 kmol gypsum = 17.2 kg. 13.6 kg would be anhydrous CaSO₄.
-
5. What mass of water forms when a fuel containing 5 kg of hydrogen burns completely?
- 45 kg
- 10 kg
- 40 kg
- 90 kg
Show answer
Answer: A. Each kg of H gives 9 kg of water (2H₂ + O₂ → 2H₂O: 4 g H → 36 g H₂O). 5 × 9 = 45 kg. 40 kg is the oxygen used.
Sign in to keep track of the lessons you finish.