• Advanced
  • About 15 min
  • 5 practice questions

Nutrient content: percentage of N, P and K in fertilisers

Calculate the percentage of nitrogen, phosphorus and potassium in a fertiliser, convert between P and P2O5 or K and K2O, and work out how much fertiliser supplies a required dose.

If something looks wrong, please tell us.

Most hard fertiliser questions come down to one skill: reading a formula and turning it into a percentage of a nutrient. Once you can do that quickly, comparing fertilisers, converting label values and working out doses per hectare all become short ratio problems. This lesson builds that skill to exam speed, using the atomic masses H = 1, C = 12, N = 14, O = 16, P = 31, S = 32, Cl = 35.5, K = 39 and Ca = 40.

Percentage of a nutrient from the formula

The percentage of an element in a compound is (mass of that element in one formula unit ÷ molar mass) × 100. For nitrogen fertilisers, first count the nitrogen atoms, then divide. Urea, CO(NH2)2, has molar mass 12 + 16 + 2 × 16 = 60 and contains two N atoms (28), so it is 28/60 × 100 = 46.7% N. Ammonium nitrate, NH4NO3, has molar mass 80 and also two N atoms, so it is 35% N. Ammonium sulphate, (NH4)2SO4, has molar mass 132 with two N atoms: 21.2% N. Ammonium chloride, NH4Cl, is 14/53.5 = 26.2% N.

Nitrogen content of pure compounds
FertiliserFormulaMolar massN atoms% N
UreaCO(NH2)260246.7
Ammonium nitrateNH4NO380235.0
Ammonium chlorideNH4Cl53.5126.2
Ammonium sulphate(NH4)2SO4132221.2
Calcium nitrateCa(NO3)2164217.1

Labels on real bags show slightly lower values than the pure compound because commercial products contain moisture and impurities. In calculations, always use the figure the question gives you; use the pure-compound value only when the question asks for the formula-based percentage.

Oxide basis: P2O5 and K2O

By convention, phosphorus is reported as P2O5 and potassium as K2O, even though no fertiliser contains these oxides as such. The conversion factors come straight from molar masses. P2O5 = 142 contains 62 g of P, so P = P2O5 × 0.436 and P2O5 = P × 2.29. K2O = 94 contains 78 g of K, so K = K2O × 0.830 and K2O = K × 1.205. For pure potassium chloride, KCl (74.5), the K content is 39/74.5 = 52.3%, which is 52.3 × 1.205 = 63.1% expressed as K2O.

The same-atom shortcut

If two fertilisers carry the same number of nutrient atoms per formula unit, equal amounts of nutrient need masses in the ratio of their molar masses. Urea, ammonium nitrate and ammonium sulphate all have two N atoms, so the mass of ammonium sulphate that matches 50 kg of urea is simply 50 × 132/60 = 110 kg. No percentage is needed.

Worked example 1: dose from a label

A crop needs 69 kg of nitrogen per hectare, supplied as urea labelled 46% N. Mass of urea = 69 ÷ 0.46 = 150 kg. Check: 150 × 0.46 = 69 kg N. If the same nitrogen came from ammonium sulphate at 21% N, the mass would be 69 ÷ 0.21 ≈ 329 kg, more than twice as much to carry and spread, which is why concentrated nitrogen sources are preferred where they suit the soil.

Worked example 2: phosphorus in a pure phosphate

Find the percentage of P and of P2O5 in pure diammonium hydrogen phosphate, (NH4)2HPO4. Molar mass = 2 × 18 + 1 + 31 + 64 = 132. P = 31/132 × 100 = 23.5%. As P2O5: 23.5 × 2.29 = 53.8%. Its nitrogen is 28/132 = 21.2%. So one compound supplies both N and P, which is why it is so widely used.

Worked example 3: comparing by the shortcut

How much ammonium nitrate gives the same nitrogen as 60 kg of urea? Both have two N atoms, so mass = 60 × 80/60 = 80 kg. Check the long way: 60 kg urea holds 60 × 28/60 = 28 kg N, and 28 kg N needs 28 × 80/28 = 80 kg ammonium nitrate. The answers agree.

% nutrient = (mass of nutrient atoms ÷ molar mass) × 100. P = 0.436 × P2O5 and K = 0.830 × K2O. Same number of nutrient atoms: masses go in the ratio of molar masses.

— Rule to remember

Key takeaways

Count atoms first, then divide by the molar mass. Remember the order of nitrogen content: urea > ammonium nitrate > ammonium chloride > ammonium sulphate. Learn the two oxide factors, 0.436 and 0.830, and use the same-atom shortcut whenever two fertilisers carry the same number of nutrient atoms. Fertiliser mass needed is always nutrient required ÷ fraction of nutrient.

Check your understanding

  1. 1. What is the percentage of nitrogen in pure ammonium nitrate, NH4NO3?

    1. 28%
    2. 35%
    3. 46.7%
    4. 17.5%
    Show answer

    Answer: B. Molar mass = 14 + 4 + 14 + 48 = 80. Two N atoms = 28. 28/80 × 100 = 35%.

  2. 2. A field needs 92 kg of nitrogen, supplied as urea labelled 46% N. How much urea is needed?

    1. 150 kg
    2. 184 kg
    3. 200 kg
    4. 250 kg
    Show answer

    Answer: C. Mass = 92 ÷ 0.46 = 200 kg. Check: 200 × 0.46 = 92 kg N.

  3. 3. Which pure compound has the highest percentage of nitrogen?

    1. Ammonium chloride
    2. Ammonium sulphate
    3. Calcium nitrate
    4. Urea
    Show answer

    Answer: D. Urea 46.7%, ammonium chloride 26.2%, ammonium sulphate 21.2%, calcium nitrate 17.1%. Urea is highest.

  4. 4. A fertiliser contains 30% P2O5. What percentage of phosphorus (P) is this?

    1. 13.1%
    2. 30%
    3. 21.8%
    4. 6.5%
    Show answer

    Answer: A. P = P2O5 × 62/142 = 30 × 0.436 = 13.1%.

  5. 5. What mass of ammonium nitrate supplies the same nitrogen as 60 kg of urea?

    1. 45 kg
    2. 60 kg
    3. 80 kg
    4. 120 kg
    Show answer

    Answer: C. Both have two N atoms, so mass = 60 × 80/60 = 80 kg.

Privacy · Terms · Refunds · Delivery