• Foundation
  • About 15 min
  • 5 practice questions

Common chemical fertilisers and reading a fertiliser bag

Recognise the main nitrogen, phosphorus and potassium fertilisers by name and formula, calculate the percentage of nitrogen in a fertiliser, and read an N-P-K label.

If something looks wrong, please tell us.

Walk into any farm supply shop and you will see bags named urea, DAP, potash and superphosphate, each printed with numbers like 10-26-26. This lesson explains what those names and numbers mean, starting from simple chemistry. You need only the atomic masses: H = 1, C = 12, N = 14, O = 16, P = 31, S = 32, Cl = 35.5, K = 39 and Ca = 40.

Nitrogen fertilisers

Most nitrogen fertilisers start with ammonia, NH3, made in factories by joining nitrogen from the air with hydrogen. This is the Haber process: N2 + 3H2 ⇌ 2NH3, carried out with an iron catalyst at high temperature and pressure. Ammonia is then turned into solid fertilisers. Urea, CO(NH2)2, is made by reacting ammonia with carbon dioxide and is the richest common solid nitrogen fertiliser. Others include ammonium sulphate, (NH4)2SO4, ammonium nitrate, NH4NO3, and calcium ammonium nitrate, a mixture of ammonium nitrate with calcium carbonate that is safer to handle.

Phosphorus and potassium fertilisers

Phosphorus fertilisers are made from rock phosphate treated with acid so that the phosphate becomes soluble. Single superphosphate is a mixture of calcium dihydrogen phosphate, Ca(H2PO4)2, and calcium sulphate; triple superphosphate is mainly calcium dihydrogen phosphate without the calcium sulphate, so it is richer in phosphorus. The main potassium fertiliser is muriate of potash, which is potassium chloride, KCl; potassium sulphate, K2SO4, is another. Diammonium phosphate (DAP), (NH4)2HPO4, supplies both nitrogen and phosphorus, so it is called a complex fertiliser.

FertiliserFormulaMain nutrient
UreaCO(NH2)2N
Ammonium sulphate(NH4)2SO4N (and S)
Ammonium nitrateNH4NO3N
SuperphosphateCa(H2PO4)2 (+ CaSO4 in single)P
Muriate of potashKClK
Diammonium phosphate(NH4)2HPO4N and P

Worked example 1: percentage of nitrogen in urea

Step 1: find the molar mass of CO(NH2)2. Carbon 12, oxygen 16, and two NH2 groups each 14 + 2 = 16, so 2 × 16 = 32. Total = 12 + 16 + 32 = 60 g. Step 2: the mass of nitrogen in it is 2 × 14 = 28 g. Step 3: percentage of nitrogen = 28 ÷ 60 × 100 = 46.7%. Compare ammonium sulphate: molar mass = 2 × 18 + 32 + 64 = 132 g, nitrogen = 28 g, so only 21.2%. Urea gives more than twice as much nitrogen per kilogram, which is why it is so widely used.

Worked example 2: how much urea?

A field needs 28 kg of nitrogen. How much urea supplies it? Step 1: 60 kg of urea contains 28 kg of nitrogen, from the formula. Step 2: so exactly 60 kg of urea is needed. If 56 kg of nitrogen were needed, the answer would double to 120 kg. Using the ratio from the formula avoids percentage arithmetic altogether.

Reading an N-P-K label

A fertiliser grade is written as three numbers, always in the order N-P-K. They give the percentage by mass of nitrogen (as N), phosphorus (counted as P2O5) and potassium (counted as K2O). The P2O5 and K2O are simply the traditional way of reporting the nutrients; the bag does not contain those oxides as such. Worked example 3: a 50 kg bag is labelled 10-26-26. Nitrogen = 10% of 50 = 5 kg; P2O5 = 26% of 50 = 13 kg; K2O = 26% of 50 = 13 kg. The remaining 19 kg is other material.

Percentage of nitrogen = (mass of N in one formula unit ÷ molar mass) × 100. Urea ≈ 46.7% N. Label N-P-K = % N, % P2O5, % K2O, always in that order.

Key takeaways

Urea, ammonium sulphate and ammonium nitrate supply nitrogen; superphosphates supply phosphorus; muriate of potash supplies potassium; DAP supplies nitrogen and phosphorus. Use the formula to find the percentage of a nutrient, and read every bag label as N, P2O5, K2O in that order. The next lesson asks how to use these fertilisers without harming soil and water.

Check your understanding

  1. 1. The chemical formula of urea is:

    1. NH4NO3
    2. CO(NH2)2
    3. (NH4)2SO4
    4. KCl
    Show answer

    Answer: B. Urea is CO(NH2)2. NH4NO3 is ammonium nitrate, (NH4)2SO4 is ammonium sulphate and KCl is muriate of potash.

  2. 2. The percentage of nitrogen in ammonium nitrate, NH4NO3 (N = 14, H = 1, O = 16), is:

    1. 17.5%
    2. 46.7%
    3. 21.2%
    4. 35%
    Show answer

    Answer: D. Molar mass = 14 + 4 + 14 + 48 = 80 g. Nitrogen = 28 g. 28 ÷ 80 × 100 = 35%.

  3. 3. Muriate of potash is chemically:

    1. Potassium chloride
    2. Potassium nitrate
    3. Potassium sulphate
    4. Potassium hydroxide
    Show answer

    Answer: A. Muriate is an old name for chloride, so muriate of potash is KCl.

  4. 4. A 20 kg bag of fertiliser is labelled 12-32-16. How much P2O5 does it contain?

    1. 3.2 kg
    2. 2.4 kg
    3. 6.4 kg
    4. 12.8 kg
    Show answer

    Answer: C. The middle number is the P2O5 percentage: 32% of 20 kg = 6.4 kg.

  5. 5. Which fertiliser is mainly used to supply phosphorus?

    1. Urea
    2. Superphosphate
    3. Muriate of potash
    4. Ammonium sulphate
    Show answer

    Answer: B. Superphosphate (calcium dihydrogen phosphate) is a phosphorus fertiliser. The others supply nitrogen or potassium.

Privacy · Terms · Refunds · Delivery