• Advanced
  • About 15 min
  • 5 practice questions

Physical properties, exceptions and the nature of oxides

Classify elements from their properties, spot the classic exceptions, and use acidic, basic and amphoteric oxide reactions in calculations.

If something looks wrong, please tell us.

At the advanced level, metals and non-metals questions rarely ask you to recite that metals are shiny. They give a set of properties and ask you to identify the element, or they hide an exception inside an option, or they turn an oxide reaction into a mass calculation. This lesson collects the general rules, the exceptions that examiners love, and the oxide chemistry that the rest of the course builds on.

General properties and the exceptions

Metals are typically lustrous, malleable (beaten into sheets), ductile (drawn into wires), sonorous, good conductors of heat and electricity, and solids with high melting points. Non-metals are typically dull, brittle when solid, poor conductors, and include solids, one liquid and many gases. The rule is only half the knowledge; the exceptions decide most options.

Rules and their exceptions
PropertyGeneral ruleExceptions to remember
State at room temperatureMetals are solidsMercury is a liquid metal
Melting pointMetals melt at high temperaturesGallium and caesium melt on the palm of the hand
HardnessMetals are hardSodium, potassium and lithium are soft enough to cut with a knife
LustreNon-metals are dullIodine is a lustrous non-metal
ConductivityNon-metals do not conductGraphite, a form of carbon, conducts electricity
Hardness of non-metalsNon-metals are soft or brittleDiamond, a form of carbon, is the hardest natural substance
State of non-metalsSolids or gasesBromine is a liquid non-metal

Among metals, silver and copper are the best conductors of electricity, which is why copper is used in wiring, while lead and mercury are comparatively poor conductors. Sodium and potassium react so vigorously with air and water that they are stored under kerosene; white phosphorus, a non-metal, catches fire in air and is stored under water. Keep these storage facts together because they are often asked as a pair.

Oxides: basic, acidic and amphoteric

The most reliable chemical test of character is the oxide. Most metal oxides are basic: they react with acids to give salt and water, and the soluble ones (alkalis) dissolve in water: Na2O + H2O → 2NaOH and K2O + H2O → 2KOH. Non-metal oxides are generally acidic: SO2 + H2O → H2SO3 and CO2 + H2O → H2CO3. A few metal oxides, notably aluminium oxide and zinc oxide, are amphoteric: they react with both acids and bases to give salt and water.

  • Al2O3 + 6HCl → 2AlCl3 + 3H2O (behaving as a base)
  • Al2O3 + 2NaOH → 2NaAlO2 + H2O (behaving as an acid; NaAlO2 is sodium aluminate)
  • ZnO + 2HCl → ZnCl2 + H2O
  • ZnO + 2NaOH → Na2ZnO2 + H2O (Na2ZnO2 is sodium zincate)

Some non-metal oxides, such as carbon monoxide, are neutral: they show neither acidic nor basic behaviour. So 'non-metal oxide' is not automatically 'acidic'.

Worked example 1: identify the element

An element is a solid that conducts electricity. It burns in oxygen to give an oxide that dissolves in water, and the solution turns blue litmus red. Which is it: sodium, graphite, sulphur or magnesium? Conducting suggests a metal, but an oxide that turns blue litmus red is acidic, which points to a non-metal. The only non-metal on the list that conducts is graphite, and its oxide CO2 gives the weak acid H2CO3. Answer: graphite. The trap is to stop reading after 'conducts electricity'.

Worked example 2: an amphoteric oxide calculation

How many grams of sodium hydroxide react completely with 20.4 g of aluminium oxide? (Al = 27, O = 16, Na = 23, H = 1.) Molar mass of Al2O3 = 2 × 27 + 3 × 16 = 102 g/mol, so 20.4 g is 20.4 ÷ 102 = 0.2 mol. From Al2O3 + 2NaOH → 2NaAlO2 + H2O, 1 mol of oxide needs 2 mol of NaOH, so 0.2 mol needs 0.4 mol. NaOH is 40 g/mol, so the mass is 0.4 × 40 = 16 g. Had the question used hydrochloric acid instead, the ratio would be 1 : 6 and you would need 1.2 mol of HCl.

Basic oxides react with acids, acidic oxides react with bases, and amphoteric oxides (Al2O3, ZnO) react with both. Always check the exceptions: mercury, gallium, caesium, sodium, iodine, graphite, diamond and bromine.

— Rule to remember

Key takeaways

Learn every property as a rule plus its exceptions, because options are built from the exceptions. Judge character by the oxide: basic for most metals, acidic for most non-metals, amphoteric for aluminium and zinc, neutral for a few like CO. In oxide calculations, write the balanced equation first; the mole ratio differs between the acid and the base reaction, and that difference is the usual trap.

Check your understanding

  1. 1. Which of these non-metals is lustrous?

    1. Sulphur
    2. Iodine
    3. Phosphorus
    4. Nitrogen
    Show answer

    Answer: B. Iodine is the standard exception: a non-metal with a shiny, metallic lustre. Sulphur and phosphorus are dull solids and nitrogen is a gas.

  2. 2. Which oxide reacts with both hydrochloric acid and sodium hydroxide to give salt and water?

    1. MgO
    2. Na2O
    3. ZnO
    4. SO2
    Show answer

    Answer: C. ZnO is amphoteric: ZnO + 2HCl → ZnCl2 + H2O and ZnO + 2NaOH → Na2ZnO2 + H2O. MgO and Na2O are basic (acids only); SO2 is acidic (bases only).

  3. 3. An element is soft enough to cut with a knife, and its oxide dissolves in water to give a solution that turns red litmus blue. The element is most likely:

    1. Graphite
    2. Sodium
    3. Sulphur
    4. Aluminium
    Show answer

    Answer: B. Soft and cut with a knife points to sodium or potassium. Na2O + H2O → 2NaOH, an alkali that turns red litmus blue. Aluminium oxide does not dissolve in water, and the oxides of graphite and sulphur are acidic.

  4. 4. Which metal is stored under kerosene because it reacts vigorously with air and moisture?

    1. Sodium
    2. Magnesium
    3. Aluminium
    4. Copper
    Show answer

    Answer: A. Sodium (and potassium) react so vigorously with oxygen and water that they can catch fire, so they are kept under kerosene. The other metals are handled in air.

  5. 5. What mass of NaOH reacts completely with 51 g of Al2O3? (Al = 27, O = 16, Na = 23, H = 1)

    1. 20 g
    2. 80 g
    3. 10 g
    4. 40 g
    Show answer

    Answer: D. Al2O3 = 102 g/mol, so 51 g = 0.5 mol. Al2O3 + 2NaOH → 2NaAlO2 + H2O needs 2 × 0.5 = 1 mol NaOH = 40 g.

Privacy · Terms · Refunds · Delivery