- Advanced
- About 16 min
- 5 practice questions
Gas mixtures: average molar mass and vapour density
Calculate the average molar mass of a gas mixture, recover its composition from a vapour density, and find the degree of dissociation.
If something looks wrong, please tell us.
Advanced mole-concept questions often hand you a mixture instead of a pure substance and give one number, usually an average molar mass or a vapour density, from which you must work out the composition. The same idea also measures how far a gas has dissociated. One weighted-average formula handles all of these, and two shortcuts make them fast.
Average molar mass is weighted by moles
A mixture behaves, for counting purposes, like a single gas with an average molar mass equal to total mass ÷ total moles. Written with mole fractions xᵢ, this is M(avg) = x₁M₁ + x₂M₂ + ... The weights are mole fractions, not mass fractions. If the composition is given by mass, convert to moles first. Because vapour density is half the molar mass, the same formula works with vapour densities.
M(avg) = total mass ÷ total moles = Σ xᵢMᵢ (mole fractions). VD(mix) = M(avg) ÷ 2.
Worked example 1: composition from average molar mass
A mixture of CO (28) and CO₂ (44) has vapour density 18. Find the mole and mass percentages. M(avg) = 36. Let x be the mole fraction of CO: 28x + 44(1 − x) = 36, so 44 − 16x = 36 and x = 0.5. The mixture is 50% CO by moles. By mass, in 1 mol of mixture CO contributes 0.5 × 28 = 14 g of 36 g, i.e. 38.9%, and CO₂ 61.1%. The mole and mass percentages differ whenever the molar masses differ, which is the core trap in these questions.
Shortcut (alligation): place 28 and 44 at the ends and 36 in the middle. The distances are 44 − 36 = 8 and 36 − 28 = 8, so the mole ratio CO : CO₂ = 8 : 8 = 1 : 1. The distance opposite each component gives its share.
Worked example 2: mixture given by mass
Equal masses of methane (16) and sulphur dioxide (64) are mixed. Take 64 g of each: CH₄ = 4 mol, SO₂ = 1 mol. M(avg) = 128 ÷ 5 = 25.6 g/mol, far below the simple average of 40 because the light gas supplies most of the molecules.
Degree of dissociation from vapour density
When a gas dissociates, the mass stays the same but the number of moles rises, so the observed molar mass or vapour density falls. If 1 mol of A dissociates into n mol of products with degree of dissociation α, total moles become 1 + (n − 1)α. Since molar mass is inversely proportional to moles at fixed mass, D ÷ d = 1 + (n − 1)α, where D is the vapour density with no dissociation and d is the observed value.
α = (D − d) ÷ [(n − 1) d], with D = theoretical vapour density and d = observed vapour density.
Worked example 3: N₂O₄ ⇌ 2NO₂
N₂O₄ has M = 92, so D = 46. A sample shows an observed vapour density of 38.33. Here n = 2. α = (46 − 38.33) ÷ (1 × 38.33) = 7.67 ÷ 38.33 = 0.20. So 20% of the N₂O₄ has dissociated. Check: total moles 1 + 0.2 = 1.2 and 46 ÷ 1.2 = 38.33.
Speed checklist
- Average molar mass always lies between the lightest and heaviest component.
- Use alligation for two-component mixtures; it gives the mole ratio directly.
- Convert mass data to moles before averaging.
- For dissociation, D ÷ d = total moles after ÷ moles before.
Key takeaways. Average molar mass is total mass over total moles, weighted by mole fractions. Alligation turns a two-gas average into a mole ratio instantly. Observed vapour density below the formula value means dissociation, and D ÷ d gives the factor by which the moles increased.
Check your understanding
-
1. 2 mol of helium (He = 4) are mixed with 1 mol of oxygen gas. What is the average molar mass of the mixture?
- 18 g/mol
- 13.33 g/mol
- 20 g/mol
- 12 g/mol
Show answer
Answer: B. Total mass = 2 × 4 + 1 × 32 = 40 g; total moles = 3. M(avg) = 40 ÷ 3 = 13.33 g/mol.
-
2. A mixture of CO and CO₂ has vapour density 20. What is the mole percentage of CO?
- 25%
- 75%
- 50%
- 40%
Show answer
Answer: A. M(avg) = 40. 28x + 44(1 − x) = 40 gives 16x = 4, x = 0.25. Alligation: (44 − 40) : (40 − 28) = 4 : 12 = 1 : 3, so CO is 25%.
-
3. Equal masses of H₂ and O₂ are mixed. What is the average molar mass of the mixture?
- 17 g/mol
- 9.4 g/mol
- 2.0 g/mol
- 3.76 g/mol
Show answer
Answer: D. Take 32 g of each: H₂ = 16 mol, O₂ = 1 mol. M(avg) = 64 ÷ 17 = 3.76 g/mol.
-
4. For N₂O₄ ⇌ 2NO₂, the observed vapour density of a sample is 30.67. What is the degree of dissociation?
- 0.25
- 0.33
- 0.5
- 0.67
Show answer
Answer: C. D = 92 ÷ 2 = 46. α = (46 − 30.67) ÷ 30.67 = 15.33 ÷ 30.67 = 0.5. Check: 46 ÷ 1.5 = 30.67.
-
5. A mixture contains 50% methane and 50% sulphur dioxide by mass. What is its average molar mass?
- 40 g/mol
- 25.6 g/mol
- 32 g/mol
- 20 g/mol
Show answer
Answer: B. In 128 g: 64 g CH₄ = 4 mol, 64 g SO₂ = 1 mol. M(avg) = 128 ÷ 5 = 25.6 g/mol.
Sign in to keep track of the lessons you finish.