• Foundation
  • About 14 min
  • 5 practice questions

What a mole is: counting particles in bulk

Understand why chemists count atoms in moles, what Avogadro's number means, and convert between moles and number of particles.

If something looks wrong, please tell us.

Atoms and molecules are far too small to count one by one. A single drop of water holds more molecules than there are grains of sand on many beaches. Chemists therefore count particles in large, fixed bundles, just as a shopkeeper counts eggs in dozens or paper in reams. That bundle is called the mole. Almost every calculation in chemistry, from how much fuel burns to how much medicine dissolves, starts with the mole, so it is worth learning it slowly and properly.

The idea of a counting unit

A dozen always means 12, whatever you are counting: 12 bananas, 12 pencils or 12 elephants. In the same way, a mole always means one fixed, very large number of particles, whatever those particles are. One mole of carbon atoms, one mole of water molecules and one mole of sodium ions all contain the same number of particles. What changes from substance to substance is the mass of that mole, not the count.

The number of particles in one mole is called Avogadro's number or the Avogadro constant, written Nₐ (N with a small A). Its value is 6.022 × 10^23 per mole. Written out in full, that is 602,200,000,000,000,000,000,000. In exam work you will almost always use 6.022 × 10^23, and sometimes the rounded value 6 × 10^23 when the question says so.

The particle must be named

Always say what you are counting. 'One mole of oxygen' is unclear: it could mean one mole of oxygen atoms (O) or one mole of oxygen molecules (O₂). One mole of O₂ molecules contains 6.022 × 10^23 molecules but 2 × 6.022 × 10^23 atoms, because every molecule has two atoms. This single habit, naming the particle, prevents the most common beginner mistake.

Same mole, different particles
SampleParticles countedNumber of those particles
1 mol of carbonC atoms6.022 × 10^23
1 mol of waterH₂O molecules6.022 × 10^23
1 mol of waterH atoms inside it2 × 6.022 × 10^23 = 1.2044 × 10^24
1 mol of NaClNa⁺ ions6.022 × 10^23

The two conversion rules

To change moles into number of particles, multiply by Nₐ. To change number of particles into moles, divide by Nₐ. In symbols: N = n × Nₐ and n = N ÷ Nₐ, where n is the number of moles and N is the number of particles.

Number of particles = moles × 6.022 × 10^23. Moles = number of particles ÷ 6.022 × 10^23.

Worked example 1: moles to molecules

How many molecules are there in 3 mol of carbon dioxide? Step 1: write the rule, N = n × Nₐ. Step 2: substitute, N = 3 × 6.022 × 10^23. Step 3: multiply the front numbers, 3 × 6.022 = 18.066, so N = 18.066 × 10^23. Step 4: write it in standard form by moving the decimal one place left and raising the power by one: N = 1.8066 × 10^24 molecules.

Worked example 2: atoms to moles

A sample contains 3.011 × 10^23 atoms of iron. How many moles is that? Step 1: n = N ÷ Nₐ. Step 2: n = (3.011 × 10^23) ÷ (6.022 × 10^23). Step 3: the powers of ten cancel, leaving 3.011 ÷ 6.022 = 0.5. So the sample is 0.5 mol of iron atoms. Notice the shortcut: 3.011 is exactly half of 6.022, so any number of the form 3.011 × 10^23 is half a mole.

Worked example 3: atoms inside molecules

How many hydrogen atoms are in 2 mol of methane, CH₄? Each molecule has 4 H atoms, so 2 mol of molecules hold 2 × 4 = 8 mol of H atoms. Then N = 8 × 6.022 × 10^23 = 48.176 × 10^23 = 4.8176 × 10^24 hydrogen atoms.

Key takeaways. A mole is a counting unit of 6.022 × 10^23 particles. Always state which particle you are counting. Multiply by Nₐ to go from moles to particles and divide to go back. For atoms inside a molecule, first multiply the moles of molecules by the number of that atom in the formula.

Check your understanding

  1. 1. One mole of any substance contains how many of its specified particles?

    1. 6.022 × 10^22
    2. 6.022 × 10^23
    3. 3.011 × 10^23
    4. 12
    Show answer

    Answer: B. By definition one mole contains Avogadro's number of particles, 6.022 × 10^23.

  2. 2. How many molecules are present in 2 mol of water?

    1. 1.2044 × 10^24
    2. 6.022 × 10^23
    3. 3.011 × 10^23
    4. 1.2044 × 10^23
    Show answer

    Answer: A. N = n × Nₐ = 2 × 6.022 × 10^23 = 12.044 × 10^23 = 1.2044 × 10^24 molecules.

  3. 3. How many atoms are present in 0.5 mol of sodium atoms?

    1. 6.022 × 10^23
    2. 1.2044 × 10^24
    3. 3.011 × 10^23
    4. 0.5 × 10^23
    Show answer

    Answer: C. N = 0.5 × 6.022 × 10^23 = 3.011 × 10^23 atoms.

  4. 4. A sample has 1.8066 × 10^24 molecules. How many moles is this?

    1. 0.3
    2. 1.8
    3. 30
    4. 3
    Show answer

    Answer: D. n = N ÷ Nₐ = 1.8066 × 10^24 ÷ 6.022 × 10^23 = 18.066 × 10^23 ÷ 6.022 × 10^23 = 3 mol.

  5. 5. How many atoms in total are present in 1 mol of carbon dioxide (CO₂)?

    1. 6.022 × 10^23
    2. 1.8066 × 10^24
    3. 1.2044 × 10^24
    4. 3
    Show answer

    Answer: B. Each CO₂ molecule has 3 atoms (1 C + 2 O). 1 mol of molecules has 3 mol of atoms = 3 × 6.022 × 10^23 = 1.8066 × 10^24 atoms.

Privacy · Terms · Refunds · Delivery