• Advanced
  • About 16 min
  • 5 practice questions

Locating any element: configuration, block, period and group

Place any element in the periodic table from its atomic number using the noble-gas shortcut, and name unnamed elements by the IUPAC rules.

If something looks wrong, please tell us.

Almost every hard periodic table question starts with one hidden step: from an atomic number, work out where the element sits. If that step takes you a minute of writing configurations, you lose time on every question. This lesson turns it into a ten-second calculation and covers the exceptions that examiners like to use as traps.

The modern periodic law and the layout

The modern periodic law states that the properties of elements are a periodic function of their atomic numbers. The table has 7 periods and 18 groups. Each period begins when a new principal shell starts to fill, so the period number equals the highest principal quantum number n in the configuration. The block is the subshell that receives the last (differentiating) electron: s, p, d or f.

Why the periods have these lengths: count the electrons the subshells hold
PeriodSubshells filledNumber of elements
11s2
22s 2p8
33s 3p8
44s 3d 4p18
55s 4d 5p18
66s 4f 5d 6p32
77s 5f 6d 7p32

Group from configuration

  • s-block: group = number of ns electrons (1 or 2).
  • d-block: group = ns electrons + (n − 1)d electrons.
  • p-block: group = 10 + ns electrons + np electrons.
  • f-block: lanthanoids and actinoids are placed in group 3.

Two famous exceptions change the configuration but not the group: chromium is [Ar] 3d5 4s1 and copper is [Ar] 3d10 4s1, because half-filled and fully filled d subshells are extra stable. The group formula still works: Cr has 5 + 1 = 6 (group 6) and Cu has 10 + 1 = 11 (group 11). Molybdenum and silver behave in the same way as Cr and Cu in the next period.

The noble-gas shortcut

Noble gases have Z = 2, 10, 18, 36, 54, 86 and 118. Subtract the largest noble-gas number below the given Z to get k; the period is one more than the noble gas's period. Then:

Period of the elementRule for the group
2 and 3k = 1 or 2 gives group k; k = 3 to 8 gives group k + 10
4 and 5group = k (k runs from 1 to 18)
6 and 7k = 1 or 2 gives group k; k = 3 to 17 are La/Ac and the f-block (group 3); k = 18 to 32 gives group k − 14

Worked example 1: three elements in seconds

Z = 34: the noble gas below is 18 (Ar, period 3), so k = 16 and the period is 4. In period 4 the group is k, so group 16, p-block (selenium). Check: [Ar] 3d10 4s2 4p4, group = 10 + 2 + 4 = 16. Z = 74: below is 54 (Xe, period 5), k = 20, period 6. Since k ≥ 18, group = 20 − 14 = 6, d-block (tungsten). Check: [Xe] 4f14 5d4 6s2, group = 2 + 4 = 6. Z = 15: below is 10, k = 5, period 3, group 5 + 10 = 15 (phosphorus).

IUPAC names for elements with Z above 100

For an element without an accepted permanent name, IUPAC builds a temporary name from the digits of Z: 0 nil, 1 un, 2 bi, 3 tri, 4 quad, 5 pent, 6 hex, 7 sept, 8 oct, 9 enn, followed by -ium. The symbol is the first letters of the three roots. When 'enn' is followed by 'nil', one n is dropped, and 'bi' or 'tri' before '-ium' drops its final i.

Worked example 2: names and positions together

Z = 114: un-un-quad-ium, ununquadium, symbol Uuq. Position: 114 − 86 = 28, period 7, group 28 − 14 = 14, the carbon family. Z = 120: un-bi-nil-ium, unbinilium, Ubn; 120 − 118 = 2, so it would start period 8 in group 2. Z = 109: un-nil-enn-ium, unnilennium, Une; 109 − 86 = 23, group 9 of period 7. Z = 104: unnilquadium (Unq); 104 − 86 = 18, group 4.

Period = highest n. Block = subshell of the last electron. k = Z − previous noble gas: periods 2-3 group k (k ≤ 2) or k + 10; periods 4-5 group k; periods 6-7 group k (k ≤ 2), group 3 for k = 3 to 17, group k − 14 for k ≥ 18.

— Rule to remember

Key takeaways

Locate elements with the noble-gas shortcut and confirm with the group formula for the block. The lengths 2, 8, 8, 18, 18, 32, 32 come from the subshells each period fills. Cr and Cu (and Mo and Ag) have one s electron, but their groups follow the same formula. Unnamed elements are named digit by digit with -ium.

Check your understanding

  1. 1. In which period and group is the element with Z = 52?

    1. Period 5, group 16
    2. Period 5, group 14
    3. Period 4, group 16
    4. Period 6, group 6
    Show answer

    Answer: A. 52 − 36 (Kr) = 16, so period 5. In periods 4 and 5 the group equals k, so group 16 (tellurium: [Kr] 4d10 5s2 5p4).

  2. 2. The element with Z = 80 belongs to

    1. group 2, s-block
    2. group 12, d-block
    3. group 16, p-block
    4. group 3, f-block
    Show answer

    Answer: B. 80 − 54 = 26, period 6. Since k ≥ 18, group = 26 − 14 = 12 (mercury, [Xe] 4f14 5d10 6s2), a d-block element.

  3. 3. What is the IUPAC temporary name and symbol for Z = 119?

    1. Ununnonium, Uun
    2. Unbinilium, Ubn
    3. Ununennium, Uue
    4. Unenium, Uen
    Show answer

    Answer: C. Digits 1-1-9 give un-un-enn-ium = ununennium, symbol Uue.

  4. 4. An element has the configuration [Ar] 3d5 4s1. Which statement is correct?

    1. It is in group 1 because it has one s electron
    2. It is in group 5 of the p-block
    3. It is manganese in group 7
    4. It is chromium in group 6
    Show answer

    Answer: D. Group = 4s + 3d electrons = 1 + 5 = 6. This is chromium's exceptional configuration (half-filled 3d). Z = 18 + 6 = 24.

  5. 5. How many elements does a period contain if it fills the 6s, 4f, 5d and 6p subshells?

    1. 18
    2. 32
    3. 24
    4. 26
    Show answer

    Answer: B. Capacities: 6s 2 + 4f 14 + 5d 10 + 6p 6 = 32 elements (period 6).

Privacy · Terms · Refunds · Delivery